Hatco GRSDH-30D Glo-Ray Horizontal Merchandising Display Warmer, Dual Shelf, 30" W, 120V, 1920 W
Description
A 30-inch self-serve warmer that holds wrapped or boxed hot food on two flat shelves under infrared top heat.
The Hatco GRSDH-30D is a Glo-Ray horizontal merchandising display warmer with two heated shelves. Pre-focused infrared top heat directs heat to the outer edges of the holding surface, where heat loss is greatest, over a thermostatically controlled, hardcoated heated base set between 185°F and 200°F. Coated shatter-resistant incandescent lights show the food, and tempered glass side panels give a full view. It runs on 120V, 1920 W, 16.0 A, with a 6 ft. cord and NEMA 5-20P plug.
Will it fit · Will it hook up
- Outside size
- 30" W x 19.5" D x 25.3" H on 4" legs
- Heated shelf space
- 28.75" W x 16.5" D per shelf, 2 shelves; average chute width 4.25"
- Power
- 120V, 1920 W, 16.0 A; 6 ft. cord with NEMA 5-20P plug
- Cord
- Left rear corner, toward the server side
- Clearance
- At least 1" from combustible walls and materials; room air at least 70°F
The NEMA 5-20P plug needs a 20 amp NEMA 5-20R receptacle; standard 15 amp outlets will not take it.
Infrared top heat
Pre-focused infrared elements direct heat to the outer edges of the holding surface, where heat loss is greatest.
Heated base
A thermostatically controlled, hardcoated heated base has a temperature range of 185°F to 200°F. Each heated shelf is controlled independently.
Coated lights
4 coated shatter-resistant incandescent lights show the food and protect it if a bulb breaks.
Divider rods included
12 adjustable product divider rods, with an average chute width of 4.25". Extra stainless steel rods are an accessory.
Glossy Gray finish
Glossy Gray is standard. Warm Red, Black, Gray Granite, White Granite, Navy Blue, Hunter Green and Antique Copper are factory options (non-returnable).
Delivery and setup
- Inspect the carton for damage before you sign, and note any damage on the delivery receipt.
- Place it on a level counter strong enough for the unit and food, indoors where the room stays at 70°F or warmer, at least 1" from combustible walls.
- NSF requires units over 36" wide or over 80 lb. to be sealed or raised on 4" legs; this dual model comes with 4" legs.
- Set the temperature and allow 30 minutes to reach operating temperature before loading preheated, wrapped product.
- Clean daily once it is off, unplugged and cool. Do not submerge it, saturate it or use a water jet; the unit is not jet-proof.
Questions buyers ask
What does it plug into?
A 120V NEMA 5-20R receptacle. It draws 1920 W, 16.0 A, through a 6 ft. cord at the left rear corner.
How much food does it hold?
2 horizontal shelves, each with 28.75" x 16.5" of usable heated space, and 12 divider rods.
How hot does the base get?
The heated base has a temperature range of 185°F to 200°F. Allow 30 minutes to reach operating temperature.
What options are there?
Designer colors, an LED Indicating Temperature Control, 5" sneeze guards, 60 W halogen bulbs, display sign holders and plexi-glass flip-up doors on one side. Chef LED bulbs and extra divider rods are accessories.
What warranty does it have?
Hatco limited warranty: 18 months from shipment or product registration, whichever is later. Bulbs, glass components and fuses are not covered. Hatco also offers 24/7 parts and service assistance in the US and Canada.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | GRSDH-30D |
| Series | Glo-Ray Horizontal Merchandising Display Warmer, GRSDH |
| Configuration | Horizontal Dual Shelf |
| Shipping Weight | 100 lb. |
| Width | 30 Inches |
| Depth | 19.5 Inches |
| Height | 25.3 Inches |
| Dimension Notes | Height on 4 inch legs |
| Heated Shelf Space | 28.75 x 16.5 Inches per Shelf |
| Number of Shelves | 2 |
| Divider Rods | 12 |
| Average Chute Width | 4.25 Inches |
| Voltage | 120 Volts |
| Wattage | 1920 Watts |
| Amps | 16.0 Amps |
| Plug Type | NEMA 5-20P |
| Phase | Single Phase |
| Cord | 6 ft. Cord and Plug, Left Rear Corner |
| Heat Sources | Pre-Focused Infrared Top HeatThermostatically Controlled Hardcoated Heated Base |
| Temperature Range | 185°F to 200°F |
| Display Lights | 4 Coated Shatter-Resistant Incandescent |
| Construction | Aluminum, Stainless Steel and Powder Coated SteelTempered Glass Side Panels |
| Standard Finish | Glossy Gray |
| Designer Colors | Warm Red, Black, Gray Granite, White Granite, Navy Blue, Hunter Green, Antique Copper |
| Factory Options | LED Indicating Temperature Control5 Inch Sneeze Guard60 Watt Halogen BulbDisplay Sign HolderPlexi-Glass Flip-Up Doors, One Side |
| Accessories | Additional Stainless Steel Divider RodsChef LED 120V Bulb, 3000K or 4000K |
| Certifications | cULus, UL EPH Classified ANSI/NSF 4 |
| Country of Origin | Made in USA |
| Warranty | 18 Months Limited |
| Warranty Notes | From shipment or product registration, whichever is laterLight bulbs, glass components and fuses not covered24/7 parts and service assistance in US and Canada |
Certifications
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
What Our Customers Say

