Hatco GRSDS-41D Glo-Ray Slant Merchandising Warmer, 41" Dual Shelf, 16 Divider Rods, 120/208-240V or 120V
Description
A 41-inch two-shelf countertop warmer that keeps wrapped or boxed hot food at serving temperature for self-serve or pass-through holding.
The Hatco GRSDS-41D Glo-Ray Slant Merchandising Display Warmer holds hot wrapped or boxed food on two slanted shelves. Pre-focused infrared heat from above and a thermostatically controlled, hardcoated heated base (185°F to 200°F) keep food at serving temperature, and 6 shatter-resistant bulbs light it. It measures 41" W x 24.29" D x 32.4" H on 4" legs, with 39.59" x 21" of heated space per shelf and 16 divider rods. Power is 120/208-240V with NEMA L14-20P plug or 120V with two NEMA 5-15P plugs.
Will it fit · Will it hook up
- Outside size
- 41" W x 24.29" D x 32.4" H; height includes 4" legs
- Power
- Two versions: 120/208-240V, 2120 W, 9.1 A, NEMA L14-20P plug; or 120V, 1090/1030 W, 9.1/8.6 A, two NEMA 5-15P plugs on two cords, each on its own circuit
- Clearance
- At least 1" from combustible walls and materials; indoor use only, in a room of at least 70°F
- NSF install
- NSF requires units over 36" wide or over 80 lb. to be sealed to the counter or raised on 4" legs, which are included
- Counter
- Level counter strong enough for the 180 lb. shipping weight plus food; keep away from hoods, A/C ducts and exterior doors
Have a grounded NEMA 5-15P or NEMA L14-20P receptacle of the right voltage within reach of the 6 ft. cord before the unit arrives.
Slanted for self-serve
Both shelves slant toward the customer, with 39.59" x 21" of heated space per shelf and 16 adjustable divider rods.
Infrared top heat
Pre-focused infrared heat from above aims at the outer edges of the holding surface, where heat loss is greatest.
Heated base 185°F to 200°F
A thermostatically controlled, hardcoated heated base holds wrapped or boxed food from below. Each shelf has its own temperature control.
Shatter-resistant lights
6 coated incandescent bulbs light the food and guard it from bulb breakage. Chef LED bulbs are an accessory.
Designer colors
Glossy Gray is standard. Warm Red, Black, Gray Granite, White Granite, Navy Blue, Hunter Green, Antique Copper are factory options at the time of purchase; non-standard colors are non-returnable.
Delivery and setup
- Inspect the carton for damage before you sign, and note any damage on the delivery receipt. Approximate shipping weight is 180 lb.
- Hatco ships the warmer mostly assembled. Fit the glass side panels, channel dividers and divider rods, and do not lay the unit on the side with the control panel.
- Install the 4" legs that come with it unless you seal the unit to the counter, as NSF requires for this size.
- If you choose the 120V only version, plug its two cords into two separate branch circuits.
- Allow about 30 minutes to reach operating temperature, and load only food that is already heated to a safe temperature. Food must be wrapped, boxed or in a pan.
Questions buyers ask
What outlet does it need?
Hatco builds it two ways. 120/208-240V: 2120 W, 9.1 A with NEMA L14-20P plug. 120V: 1090/1030 W, 9.1/8.6 A with two NEMA 5-15P plugs. Choose the version that matches your outlets; the 120V only version needs two separate circuits.
How much food does it hold?
Each shelf has 39.59" x 21" of heated space, with 16 adjustable divider rods to keep rows apart.
How hot does it hold food?
The heated base adjusts from room temperature up to about 185°F to 200°F, with infrared heat from above. It holds food that is already hot; it is not made to cook or reheat.
Can I get it in a color?
Yes, at the time of purchase. Glossy Gray is standard; Warm Red, Black, Gray Granite, White Granite, Navy Blue, Hunter Green, Antique Copper are factory options. Non-standard colors are non-returnable.
What certifications does it have?
The spec sheet shows cULus and UL EPH Classified to ANSI/NSF 4 marks. It is made in the USA.
What is the warranty?
Hatco covers defects in materials and workmanship for 18 months from shipment or registration, whichever is later. Bulbs, glass and fuses are not covered. Register within 90 days of shipment.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | GRSDS-41D |
| Series | Glo-Ray Slant Merchandising Display Warmer |
| Shipping Weight | 180 lb. |
| Width | 41 Inches |
| Depth | 24.29 Inches |
| Height | 32.4 Inches |
| Dimension Notes | Height Includes 4 Inch Legs |
| Usable Heated Shelf Space | 39.59" x 21" per Shelf |
| Shelves | 2, Slanted |
| Divider Rods | 16 |
| Average Chute Width | 4.5 Inches |
| Display Lights | 6 Coated Shatter-Resistant Incandescent Bulbs |
| Voltage | 120/208-240 Volts or 120 Volts |
| Phase | Single Phase |
| Electrical Versions | 120/208-240V: 2120 W, 9.1 A, NEMA L14-20P120V: 1090/1030 W, 9.1/8.6 A, two NEMA 5-15P, two cords on separate circuits |
| Plug Type | NEMA L14-20P or 2 x NEMA 5-15P |
| Cord | 6 ft. Cord and Plug, Server Side, Bottom Right Corner |
| Top Heat | Pre-Focused Infrared, Tubular Metal Sheathed Element |
| Heated Base | Thermostatically Controlled, Hardcoated |
| Temperature Range | 185°F to 200°F |
| Controls | Temperature Control and Power On/Off Switch per Shelf |
| Side Panels | Tempered Glass |
| Shelf Surface | Hardcoated |
| Standard Color | Glossy Gray |
| Legs | 4 Inch Legs Included |
| Standard Equipment | Tempered Glass Side PanelsHardcoated ShelvesShatter-Resistant Incandescent LightsAdjustable DividersLegs6 ft. Cord with Plug |
| Designer Colors | Warm Red, Black, Gray Granite, White Granite, Navy Blue, Hunter Green, Antique CopperNon-Standard Colors Non-Returnable |
| Factory Options | LED Indicating Temperature Control5 Inch Sneeze Guard60 Watt Halogen Bulb in Place of Standard LightDisplay Sign HolderPlexi-Glass Flip-Up Doors on One SideFlip-Up Door Locking PlateAt Time of Purchase Only |
| Accessories | Chef LED Light Bulbs, 3000K or 4000KAdditional Stainless Steel Divider Rods |
| Certifications | cULus, UL EPH Classified ANSI/NSF 4 |
| NSF Installation | Seal to Counter or Raise on 4 Inch Legs |
| Country of Origin | Made in USA |
| Warranty | 18 Month Hatco Limited Warranty |
| Warranty Details | Repair or replacement of defective parts for 18 months from shipment or registration, whichever is laterBulbs, LED lights, glass and fuses excluded24/7 parts and service assistance in US and Canada |
Certifications
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
What Our Customers Say

