Hatco GRSDS/H-30D Glo-Ray Slant/Horizontal Merchandising Warmer, 30" Dual Shelf, Low Watt Top Shelf, 120V
Description
A 30-inch two-shelf warmer with a horizontal top shelf for popcorn and a slanted bottom shelf for boxed or wrapped food.
The Hatco GRSDS/H-30D Glo-Ray Slant/Horizontal Merchandising Display Warmer has a slanted bottom shelf and a horizontal top shelf with 12" clearance. Low watt overhead heat on the top shelf suits popcorn, while pre-focused infrared heat and a 185°F to 200°F hardcoated heated base hold boxed pizza, nachos or wrapped food below. It is 30" W x 24.19" D x 33.5" H on the included 4" legs and runs on 120V, 1530 W with a NEMA 5-15P plug.
Will it fit · Will it hook up
- Outside size
- 30" W x 24.19" D x 33.5" H; height includes 4" legs and the standard 12" top shelf clearance
- Power
- 120V single phase, 1530 W, 12.8 A; 6 ft. cord with NEMA 5-15P plug; Canadian models use NEMA 5-20P
- Clearance
- At least 1" from combustible walls and materials; indoor use only, in a room of at least 70°F
- NSF install
- NSF requires units over 36" wide or over 80 lb. to be sealed to the counter or raised on 4" legs, which are included
- Counter
- Level counter strong enough for the 140 lb. shipping weight plus food; keep away from hoods, A/C ducts and exterior doors
Have a grounded NEMA 5-15P receptacle of the right voltage within reach of the 6 ft. cord before the unit arrives.
Two shelf styles
A slanted bottom shelf (28.59" x 21") for self-serve and a horizontal top shelf (28.75" x 16.5") with 12" clearance.
Infrared top heat
Pre-focused infrared heat from above aims at the outer edges of the holding surface, where heat loss is greatest.
Heated base 185°F to 200°F
A thermostatically controlled, hardcoated heated base holds wrapped or boxed food from below. Each shelf has its own temperature control.
High or low watt top
This low watt model is set up to hold popcorn on the top shelf. Hatco sells high watt HW models for fried foods.
Shatter-resistant lights
4 coated incandescent bulbs light the food and guard it from bulb breakage. Chef LED bulbs are an accessory.
Designer colors
Glossy Gray is standard. Warm Red, Black, Gray Granite, White Granite, Navy Blue, Hunter Green, Antique Copper are factory options at the time of purchase; non-standard colors are non-returnable.
Delivery and setup
- Inspect the carton for damage before you sign, and note any damage on the delivery receipt. Approximate shipping weight is 140 lb.
- Hatco ships the warmer mostly assembled. Fit the glass side panels, channel dividers and divider rods, and do not lay the unit on the side with the control panel.
- Install the 4" legs that come with it unless you seal the unit to the counter, as NSF requires for this size.
- Plug into a properly grounded receptacle that matches the NEMA 5-15P plug; if it does not match, have a qualified electrician install the right one.
- Allow about 30 minutes to reach operating temperature, and load only food that is already heated to a safe temperature. Food must be wrapped, boxed or in a pan.
Questions buyers ask
What outlet does it need?
120V single phase, 1530 W and 12.8 A, on a 6 ft. cord with a NEMA 5-15P plug. Canadian models use NEMA 5-20P.
What goes on each shelf?
The low watt top shelf is made to hold popcorn; the slanted bottom shelf holds boxed pizza, nachos or wrapped food. For fried food on top, Hatco offers the high watt HW models.
How much food does it hold?
The top shelf has 28.75" x 16.5" and the bottom shelf 28.59" x 21" of heated space, with 12 adjustable divider rods to keep rows apart.
How hot does it hold food?
The heated base adjusts from room temperature up to about 185°F to 200°F, with infrared heat from above. It holds food that is already hot; it is not made to cook or reheat.
Can I get it in a color?
Yes, at the time of purchase. Glossy Gray is standard; Warm Red, Black, Gray Granite, White Granite, Navy Blue, Hunter Green, Antique Copper are factory options. Non-standard colors are non-returnable.
What certifications does it have?
The spec sheet shows cULus and UL EPH Classified to ANSI/NSF 4 marks. It is made in the USA.
What is the warranty?
Hatco covers defects in materials and workmanship for 18 months from shipment or registration, whichever is later. Bulbs, glass and fuses are not covered. Register within 90 days of shipment.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | GRSDS/H-30D |
| Series | Glo-Ray Slant/Horizontal Merchandising Display Warmer |
| Shipping Weight | 140 lb. |
| Width | 30 Inches |
| Depth | 24.19 Inches |
| Height | 33.5 Inches |
| Dimension Notes | Height Includes 4 Inch Legs and Standard 12 Inch Top Shelf ClearanceOptional 15 Inch Clearance Adds 3 Inches |
| Top Shelf | Horizontal, 28.75" x 16.5" Usable Heated Space |
| Bottom Shelf | Slanted, 28.59" x 21" Usable Heated Space |
| Shelves | 2, Slanted Bottom, Horizontal Top |
| Divider Rods | 12 |
| Average Chute Width | 4.25 Inches |
| Display Lights | 4 Coated Shatter-Resistant Incandescent Bulbs |
| Voltage | 120 Volts |
| Phase | Single Phase |
| Wattage | 1530 Watts |
| Amps | 12.8 Amps |
| Plug Type | NEMA 5-15P |
| Canadian Models | Canadian models use NEMA 5-20P |
| Cord | 6 ft. Cord and Plug, Server Side, Bottom Right Corner |
| Top Heat | Pre-Focused Infrared, Tubular Metal Sheathed ElementLow Wattage on Top Shelf, for Popcorn |
| Heated Base | Thermostatically Controlled, Hardcoated |
| Temperature Range | 185°F to 200°F |
| Controls | Temperature Control and Power On/Off Switch per Shelf |
| Side Panels | Tempered Glass |
| Shelf Surface | Hardcoated |
| Standard Color | Glossy Gray |
| Legs | 4 Inch Legs Included |
| Standard Equipment | Tempered Glass Side PanelsHardcoated ShelvesShatter-Resistant Incandescent LightsAdjustable Dividers4 Inch Legs6 ft. Cord with Plug |
| Designer Colors | Warm Red, Black, Gray Granite, White Granite, Navy Blue, Hunter Green, Antique CopperNon-Standard Colors Non-Returnable |
| Factory Options | 15 Inch Top Shelf Clearance in Place of 12 Inch60 Watt Halogen Bulb in Place of Standard LightAt Time of Purchase Only |
| Accessories | Additional Stainless Steel Divider Rods for Horizontal or Slant Shelf |
| Certifications | cULus, UL EPH Classified ANSI/NSF 4 |
| NSF Installation | Seal to Counter or Raise on 4 Inch Legs |
| Country of Origin | Made in USA |
| Warranty | 18 Month Hatco Limited Warranty |
| Warranty Details | Repair or replacement of defective parts for 18 months from shipment or registration, whichever is laterBulbs, LED lights, glass and fuses excluded24/7 parts and service assistance in US and Canada |
Certifications
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
What Our Customers Say



