Hatco HCSBFP-48-F R-290 Hot/Cold Built-In Flush Top Shelf, 48" x 15-1/2" Hardcoat Surface, 120V
One built-in shelf that holds hot food at lunch and cold food at dinner, switching modes in as little as 30 minutes.
The Hatco HCSBFP-48-F is a top-mount built-in hot/cold shelf with a 48" x 15-1/2" hardcoat aluminum surface, with an attached R-290 condensing unit under the shelf and a remote control box. A rope-style heating element under the surface handles HOT mode and a copper evaporator coil handles COLD mode, and the shelf changes from one to the other in as little as 30 minutes. A patented thermal break cuts condensation and heat transfer to the counter around it. It arrives as one assembled unit and plugs into a 120V outlet with its 6 ft cord.
Plan the cabinet under the shelf: the condensing unit hangs below the counter and needs air flow.
Switch between HOT and COLD mode from the control box; the shelf changes over in as little as 30 minutes.
The HOT controller sets from 65°F to 192°F (factory 180°F) and the COLD controller from 10°F to 50°F (factory 25°F).
Reduces condensation and temperature transfer onto the countertop around the shelf.
The food-safe hardcoat aluminum top gives a 48" x 15-1/2" heated and cooled area, flush with the counter.
The attached condensing unit uses natural R-290 refrigerant and connects to the coil with a flexible tubing assembly.
Hatco says the shelf changes modes in as little as 30 minutes, and the manual says to allow about 30 minutes to reach setpoint before loading.
No. Hatco says food must be wrapped, boxed or on a food pan, not placed directly on the hardcoat surface.
HOT mode sets from 65°F to 192°F and comes set at 180°F. COLD mode sets from 10°F to 50°F and comes set at 25°F. An auto-defrost cycle can be turned on in COLD mode.
A 120V, 60 Hz outlet for the 6 ft cord and NEMA 5-15P plug. Hatco rates it at 6.5 A, with 710 W on the hot side and a 1/3 hp compressor.
Yes, with the intake air ducting that comes with it and an exhaust opening of at least 12" x 12" on the opposite side of the condenser. Open cabinets usually need no ducting if the cabinet air stays at or below 86°F.
Under the shelf. On 36" and 48" models it is left-aligned as standard and can be ordered center-aligned; 24" models are center-aligned only.
Hatco covers it under its limited warranty. An additional four-year parts-only warranty on the compressor can be added at the time of purchase (U.S. and Canada).
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | HCSBFP-48-F |
| Series | HCSBFP R-290 Hot/Cold Built-In Flush Top Shelves |
| Shipping Weight | 165 lb. |
| Width | 49-1/2 Inches |
| Depth | 17 Inches |
| Height | 18.57 Inches |
| Usable Shelf Space | 48 x 15-1/2 Inches |
| Countertop Cutout | 48-5/8 to 49 Inches Wide x 16-1/8 to 16-1/2 Inches Deep |
| Control Box | 13.94 W x 6.63 H x 5.43 D InchesCutout 13-1/8 x 5-5/8 Inches |
| Voltage | 120 Volts |
| Hertz | 60 Hz |
| Phase | 1 |
| Amps | 6.5 Amps |
| Hot Side Watts | 710 Watts |
| Cold Side Watts | 440 Watts |
| Compressor | 1/3 HP |
| Refrigerant | R-290 |
| Total Heat of Rejection | 2,664 BTU/hr |
| Plug Type | NEMA 5-15P |
| Cord | 6 Foot Cord and Plug on Control Box4 Foot Cord Control Box to Condensing Unit |
| Temperature Range | Hot 65 to 192°FCold 10 to 50°F |
| Mode Change Time | As Little as 30 Minutes |
| Control Type | Remote Control Box3-Position Power SwitchTwo Digital Temperature Controllers |
| Surface | Food-Safe Hardcoat Aluminum |
| Housing | Insulated Stainless Steel and Aluminized Steel |
| Mounting | Built-In, Top Mount, Flush |
| Ambient Temperature | 65 to 86°F |
| Factory Options | Center-Aligned Condenser, 36 and 48 Inch Models7-1/2 Foot Control Cable4-Year Compressor Parts WarrantyAt Time of Purchase |
| Certifications | cULus, NSF Component |
| Country of Origin | Made in USA |
| Warranty | Hatco Limited Warranty |
Certifications
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
