Hatco HCSSBX-4818 Remote Hot/Cold Built-In Simulated Stone Shelf, 48" x 18", Control Box Only (No Condenser), 120V
A 48-inch flush-mount stone shelf that holds hot food or cold food from one surface, switching modes in as little as 30 minutes.
The Hatco HCSSBX-4818 is a patented remote hot/cold built-in shelf with a simulated stone top that sits flush with the countertop. One surface heats for hot food at lunch and chills for cold items at another daypart. The X version comes with the shelf, a loose remote control box, a loose TXV valve and a liquid line solenoid valve attached to the shelf, but no condensing unit: you connect it to a condensing unit supplied by others. Ash Gray Swanstone is standard; other stone and glass-ceramic tops are factory options.
Plan the condensing unit, refrigerant line route and a vertical wall spot for the control box before the countertop is cut.
The shelf changes from hot to cold or cold to hot in as little as 30 minutes, so one counter serves different dayparts.
The remote control box has a three-position power switch and separate HOT and COLD digital controllers. Hot setpoints run 65°F to 192°F; cold setpoints run 10°F to 50°F.
The X version has no condenser. Hatco notes it lets the shelf be cooled with other refrigerants; the liquid line solenoid valve comes attached to the shelf and the TXV ships loose.
A thermal break reduces condensation and temperature transfer to the countertop around the shelf.
Ash Gray Swanstone is standard. Birch and Ice Swanstone, Dekton Rem, Domoos and Soke, or black or white glass-ceramic tops are options at time of purchase.
No. The HCSSBX models include the shelf, remote control box, TXV valve and an attached liquid line solenoid valve, but the condensing unit is supplied by others. Hatco sells the HCSSBR version with a loose condensing unit.
The HOT controller sets from 65°F to 192°F (factory set at 180°F). The COLD controller sets from 10°F to 50°F (factory set at 25°F).
Hatco rates the change at as little as 30 minutes. After switching to cold there is a five-minute programmed delay before cooling starts.
120V, 60 Hz, single phase: 815 W and 6.8 A for the HCSSBX-4818. The on-site supply connects to the terminal block in the control box.
48.375" W x 18.375" D with 0.375" radius corners. The control box needs a 13.125" x 5.625" wall cutout and 10" of depth.
Hatco lists a one-year parts and on-site labor warranty as standard, with 24/7 parts and service assistance in the U.S. and Canada.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | HCSSBX-4818 |
| Series | Remote Hot/Cold Built-In Simulated Stone Shelves HCSSBX |
| Type | Built-In Hot/Cold Shelf, Remote Control Box Only, No Condenser |
| Shipping Weight | 140 lb. |
| Width | 51 Inches |
| Depth | 21 Inches |
| Height | 7.52 Inches |
| Usable Shelf Space | 48" W x 18" D |
| Countertop Cutout | 48.375" W x 18.375" D0.375" Corner Radii |
| Control Box | 13.94" W x 6.63" H x 5.43" DCutout 13.125" x 5.625"10" Install Depth |
| Voltage | 120 Volts |
| Hertz | 60 Hz |
| Phase | 1 |
| Wattage | 815 Watts |
| Amps | 6.8 Amps |
| Connection | Field Wired to Control Box Terminal Block |
| Condensing Unit | Not Included, Supplied by Others |
| Evaporator Load | 1,649 BTU/hr |
| Valves | Liquid Line Solenoid Valve Attached to ShelfTXV Valve Shipped Loose |
| Temperature Range | 10°F to 50°F Cold65°F to 192°F Hot |
| Mode Change Time | As Little as 30 Minutes |
| Control Type | Remote Electronic Control BoxHot and Cold Digital Controllers3-Position Power Switch |
| Lead and Probe | 4 ft. Control Box Lead Wire72" Heated Base Conduit108" Probe Wires |
| Top Surface | Ash Gray Swanstone Simulated Stone, Standard |
| Surface Options | Birch or Ice SwanstoneDekton Rem, Domoos or SokeBlack or White Glass-Ceramic |
| Mounting | Bottom Mount, Flush with CountertopPatented Thermal Break |
| Ambient Range | 65°F to 86°F |
| Ships With | Shelf Assembly with Temperature ProbeControl Box and TXV Valve Shipped LooseSolenoid Valve Attached |
| Certifications | cULus, NSF Component, Made in USA |
| CE Mark | Not Available |
| Warranty | 1 Year Parts and On-Site Labor |
Certifications
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
