Hatco HDW-4 Freestanding Drawer Warmer, 4 Drawers, 1,800 W, 120V, 208V or 240V
Description
Holds rolls, meats and sides hot and moist in four separately controlled drawers, so food is ready when the rush hits.
The Hatco HDW-4 is a freestanding drawer warmer with four insulated drawers. Each drawer has its own recessed thermostat, temperature monitor, On/Off switch and sliding vents, so you can hold different foods at the right heat and moisture. A 6" deep, full-size stainless pan comes with each drawer. The cabinet is stainless steel, the drawers roll on nylon rollers on 12-gauge stainless slides, and it stands on 6" stainless steel legs with a 6 ft. cord and plug. Voltage is chosen at order: 120V (NEMA 5-15P) or 208V/240V (NEMA 6-15P).
Will it fit · Will it hook up
- Outside size
- 29-1/2" W x 22-5/8" D x 41-3/8" H cabinet; 47-3/8" H on the standard 6" stainless steel legs. Add 1-3/8" to depth for the drawer handle
- Footprint
- Legs sit 24-3/4" W x 19-1/16" D apart
- Power
- 1,800 W. 120V: 15 A, NEMA 5-15P. 208V: 8.7 A or 240V: 7.5 A, NEMA 6-15P. 6 ft. cord, single phase; cord exits the back, lower left corner
- Pans
- One 20-3/4" x 12-3/4" x 6" stainless food pan per drawer; it lifts straight out
Keep it at least 1" from combustible walls, indoors where the room stays at 70°F or warmer, away from fans and air ducts.
Separate drawer controls
Each drawer has its own recessed thermostat, temperature monitor and On/Off switch.
Adjustable vents
Sliding vents on each drawer let you hold crisp foods dry or soft foods moist.
Insulated cavities
Completely insulated individual cavities keep heat in and use less energy.
Heavy-duty drawers
Drawers roll on nylon rollers on 12-gauge stainless steel slides.
6" deep pans included
Each drawer comes with a full-size 6" deep stainless pan. On standard width models it lifts straight out.
Delivery and setup
- Inspect the crate for damage before you sign, and note any damage on the delivery receipt. Approximate shipping weight is 296 lb.
- Two people are needed to set the unit upright and level it on its 6" stainless steel legs. Do not lay it on the front or back.
- Order the voltage that matches your outlet: 120V uses a NEMA 5-15P plug, 208V and 240V use a NEMA 6-15P plug.
- Allow 15 to 20 minutes to preheat, and run it empty the first time: manufacturing oils may smoke for up to 30 minutes.
- Clean daily once cool: wash the pans, wipe the cavity and exterior with a damp cloth and a non-abrasive cleaner. No bleach, oven cleaner, steam or jet spray.
Questions buyers ask
How much food does a drawer hold?
Each standard drawer holds about 6 to 8 dozen dinner rolls, 25 to 30 lb. of ribs, or 3 to 3-1/2 dozen potatoes.
What power does it need?
Pick the voltage when you order. At 120V it draws 15 A and uses a NEMA 5-15P plug; at 208V (8.7 A) or 240V (7.5 A) it uses a NEMA 6-15P plug. All versions are 1,800 W, single phase.
Will it fit my space?
The cabinet is 29-1/2" W x 22-5/8" D x 41-3/8" H, 47-3/8" H on the standard 6" stainless steel legs. Allow 1-3/8" more depth for the handle and 1" from combustible walls.
How do I set humidity?
Slide each drawer's vent open for crisp foods like hard rolls, fried items and meats, half open for soft rolls and vegetables, and closed for fish. For extra moisture, add the optional water/spillage pan with about 1/4" of water under the food pan.
What options are there?
Factory options: Designer color drawer fronts, touchscreen temperature and timer control, an oversized 20" x 15" x 5" drawer and pan, a biscuit pan drawer and a chip guard. Accessories: trivet, water/spillage pan, splash baffle, extra stainless pans, 5" locking casters.
What warranty does it have?
Hatco's limited warranty runs 18 months from shipment or product registration, whichever is later. Drawer warmer elements and drawer rollers and slides get 1 year parts and labor plus a second year on parts.
What certifications does it have?
The spec sheet shows cULus and NSF marks and a Made in USA mark.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | HDW-4 |
| Type | Freestanding Drawer Warmer |
| Number of Drawers | 4 |
| Shipping Weight | 296 lb. |
| Availability | Not Available for Canada |
| Width | 29-1/2 Inches |
| Depth | 22-5/8 Inches |
| Height | 41-3/8 Inches |
| Height on Legs | 47-3/8 Inches with Standard 6 Inch Legs |
| Depth Note | Add 1-3/8 Inches for Drawer Handle |
| Leg Footprint | 24-3/4 Inches W x 19-1/16 Inches D |
| Voltage | 120, 208 or 240 Volts |
| Phase | Single Phase |
| Wattage | 1,800 Watts |
| Amps | 120V: 15 A208V: 8.7 A240V: 7.5 A |
| Plug Type | 120V: NEMA 5-15P208V and 240V: NEMA 6-15P |
| Cord | 6 ft. Cord and Plug, Back Lower Left Corner |
| Food Pans | 4 Full-Size Stainless Pans, 20-3/4 x 12-3/4 x 6 Inches, One per Drawer |
| Holding Capacity per Drawer | 6 to 8 Dozen Dinner Rolls25 to 30 lb. Ribs3 to 3-1/2 Dozen Potatoes |
| Controls | Per Drawer: Recessed Thermostatic Control, Temperature Monitor, On/Off Switch, Sliding Vents |
| Exterior | Stainless Steel |
| Drawer Hardware | Nylon Rollers on 12-Gauge Stainless Steel Slides |
| Insulation | Completely Insulated Individual Cavities |
| Legs | 6 Inch Stainless Steel Legs |
| Clearances | 1 Inch from Combustible WallsIndoors, Room at Least 70°F |
| Factory Options | Designer Color Drawer FrontsTouchscreen Temperature and Timer ControlOversized 20 x 15 x 5 Inch Drawer and PanBiscuit Pan DrawerChip Guard |
| Accessories | TrivetWater/Spillage PanSplash BaffleStainless Food Pans5 Inch Locking Casters |
| Certifications | cULus, NSF |
| Country of Origin | Made in USA |
| Warranty | 18 Months Limited |
| Warranty Notes | Drawer warmer elements and drawer rollers and slides: 1 year parts and labor plus 1 additional year parts onlyFrom shipment or registration, whichever is later |
Certifications
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
What Our Customers Say

