Hatco HL-36 Glo-Rite Display Light, 36" W, 3 Bulbs, 180W, 120V
A 36-inch light strip that puts bright, food-safe light on your prep, holding or display area.
The Hatco HL-36 Glo-Rite display light is a 36" long extruded aluminum light strip with bright-annealed reflectors for maximum brightness. It holds 3 incandescent bulbs with a special protective coating that guards against food contamination. Each unit has its own on/off switch, and it runs on 120V single phase. Hatco recommends it for food preparation, holding and display areas.
Measure the shelf or overhead run: the light is 36" long, 3" deep and 2-1/2" high, and needs a hardwired 120V supply.
Incandescent bulbs with a special protective coating guard against food contamination if a bulb breaks.
Bright-annealed reflectors in an extruded aluminum housing direct the light onto the food.
Each unit has a toggle switch for operator control, on the chef's left side unless you specify otherwise.
Glo-Rite lights come in lengths from 18" to 72"; this model is 36" long with 3 bulbs.
Seven Designer colors, 60 W halogen bulbs (120V only), no bulb, a remote toggle switch and extended leads up to 20 ft.
It is hardwired at 120V single phase with 6" pigtail leads on the server's right. Hatco rates it at 180 W and 1.5 A with 60 W bulbs. Use supply wires rated for at least 194°F (90°C).
It ships with 40 W coated incandescent bulbs and is rated for 60 W bulbs. Hatco lists replacement 120V bulb P/N 02.30.265.00, and 60 W halogen bulbs (P/N 02.30.081.00) as an option. Use only NSF-rated, coated bulbs made for food areas.
Hatco lists Chef LED bulbs as accessories: CLED-3000-120 (similar to warm halogen) and CLED-4000-120 (similar to cool fluorescent). The bulbs must be rotated down.
Hang it from an overhead system on chains, or fasten it to a flat or rolled/flanged shelf with adjustable angle brackets (HL-BRKT, sold as a pair).
Designer colors Warm Red, Black, Gray Granite, White Granite, Navy Blue, Hunter Green and Antique Copper are options at the time of purchase. Non-standard colors are non-returnable.
Hatco's HL manual gives a limited warranty of one year from purchase when installed and maintained to Hatco's instructions, or 18 months from shipment. Coated incandescent bulbs are not covered.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | HL-36 |
| Series | Glo-Rite Display Light |
| Shipping Weight | 8 lb. |
| Width | 36 Inches |
| Depth | 3 Inches |
| Height | 2.5 Inches |
| Voltage | 120 Volts |
| Phase | Single Phase |
| Watts | 180 Watts |
| Amps | 1.5 Amps |
| Rating Note | Watts and amps rated with 60 W bulbs; unit ships with 40 W bulbs |
| Connection | 6 in. pigtail leads, server's right; hardwired by a qualified electrician |
| Number of Bulbs | 3 |
| Lamp Configuration | Standard lamp configuration |
| Bulb Type | Coated incandescent, threaded base; replacement 120V P/N 02.30.265.00 |
| Housing | Extruded aluminum with bright-annealed reflectors |
| Switch | Toggle on/off switch, max. 15 amps, chef's left side unless specified |
| Factory Options | Designer colors; 60 W halogen bulbs, 120V only; no bulb; remote toggle switch; extended leads 1-5, 6-10, 11-15 or 16-20 ft. |
| Designer Colors | Warm Red, Black, Gray Granite, White Granite, Navy Blue, Hunter Green, Antique Copper; non-returnable |
| Accessories | HL-BRKT adjustable angle brackets, pair; Chef LED bulbs CLED-3000-120 and CLED-4000-120 |
| Certifications | cULus, NSF Component |
| Country of Origin | Made in the USA logo on spec sheet |
| Warranty | Hatco Limited Warranty |
| Warranty Terms | 1 year from purchase or 18 months from shipment per HL manual; coated incandescent bulbs not covered |
Certifications
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
