Hatco HWBHIBRT-FUL Full-Size Heated Well, UR Fabricator Component, Insulated Bottom Mount, Thermostat Control, No Drain, 1650W, 120/208/240V
Description
A full-size heated well component for fabricators who build their own steam tables, holding hot food in a pan set into the counter.
The Hatco HWBHIBRT-FUL is a UL recognized (UR, C-UR) insulated bottom-mount full-size heated well sold as a fabricator component. It comes with a thermostat control with lit rocker switch and 36" capillary, but without conduit or a control box enclosure, so the fabricator builds the controls into the steam table and must obtain UL or other approvals for the finished unit. It is rated 1650W on 120/208/240V single phase and measures 13.84" W x 22.09" D x 10.26" H.
Will it fit · Will it hook up
- Outside size
- 13.84" W x 22.09" D x 10.26" H
- Countertop cutout
- 12.03" W x 20.03" D, flanged; mounts to the underside of a non-combustible countertop
- Control cutout
- 2.125" W x 3.375" H for the thermostat control; enclosure by the fabricator
- Power
- 120V 1650W 13.8A; 208V 1650W 7.9A; 240V 1650W 6.9A; single phase; voltage is set when you order
- Plug
- Hardwired; no cord and plug listed for this model
- Clearance
- At least 3-1/2" from the bottom of the unit to combustible surfaces
The fabricator must obtain UL or other approvals for the finished steam table.
Built for fabricators
UL recognized (UR, C-UR) component without conduit or control box enclosure, so you can lay out a custom steam table.
Thermostat control
Thermostat with lit rocker switch and 36" capillary; a 6' capillary thermostat is available when you order.
Wet or dry operation
Designed for wet or dry holding. Hatco recommends wet operation, with water up to 1-1/4" deep, for consistent food heating.
Insulated well
Insulation on the sides and bottom keeps heat in the well and leaves surrounding surfaces cooler.
Easy service access
Bottom-mount design: only the pan edge shows above the counter; the well fastens under the countertop.
Delivery and setup
- Inspect the carton for damage before you sign, and note any damage on the delivery receipt.
- Hatco says the well must be installed by qualified installers to local electrical and plumbing codes; use a qualified electrician for power.
- Install with ribbon putty gasket between the well and the counter, and keep at least 3-1/2" from the bottom of the unit to combustible surfaces.
- Conduit and the control box enclosure are not included; the fabricator supplies them and obtains UL or other approvals.
- Bottom mounting needs a custom countertop with turned-down flanges, done by an experienced installer.
Questions buyers ask
What size cutout does it need?
For a non-combustible countertop, cut 12.03" W x 20.03" D, flanged. It mounts only to the underside of a non-combustible countertop.
What voltages are available?
Choose one when you order: 120V 1650W 13.8A; 208V 1650W 7.9A; 240V 1650W 6.9A, all single phase. The well is voltage specific. It is hardwired.
What pans fit?
It holds one full-size pan, three 1/3-size or two 1/2-size pans with adapter bars, two 7-quart round pans or three 4-quart round pans with an adapter top. Pans, adapter bars and adapter tops are sold separately.
Does this model have a drain?
No. Hatco makes a drain version with "D" added to the model number.
What does UR fabricator component mean?
The well is UL recognized as a component. It has no conduit or control box enclosure, and the fabricator must get UL or other approvals for the finished table.
What warranty does it have?
Hatco lists 1 year parts and labor plus 1 more year parts-only on heated well elements (metal sheathed), and 18 months on other components, from shipment or registration if later. Register within 90 days.
Can I get square pan corners?
Yes. Square pan corners in place of the standard round corners are a factory option at time of purchase.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | HWBHIBRT-FUL |
| Type | Built-In Full-Size Heated WellUR, C-UR Fabricator Component |
| Insulation | Insulated |
| Mounting | Bottom Mount Only, to Underside of Non-Combustible Countertop |
| Wattage Class | High Watt |
| Shipping Weight | 28 lb. |
| Width | 13.84 Inches |
| Depth | 22.09 Inches |
| Height | 10.26 Inches |
| Cutout, Non-Combustible Countertop | 12.03" W x 20.03" D, flanged |
| Voltage | 120/208/240 Volts |
| Phase | 1 |
| Ratings | 120V: 1650 W, 13.8 A208V: 1650 W, 7.9 A240V: 1650 W, 6.9 A |
| Connection | Hardwired |
| Control Type | Thermostat with Lit Rocker Switch36" Capillary |
| Control Cutout | 2.125" W x 3.375" H |
| Enclosure | No Conduit or Control Box Enclosure Included |
| Capacity | 1 Full-Size Pan |
| Pan Combinations | One full-size pan, three 1/3-size or two 1/2-size pans with adapter bars, two 7-quart round pans or three 4-quart round pans with an adapter top |
| Operation | Wet or DryWater up to 1-1/4" Deep for Wet Use |
| Drain | No Drain |
| Housing | Stainless and Aluminized SteelMetal Sheathed Heating Element |
| Certifications | UR, C-UR |
| Warranty | Heated Well Element 1 Year Parts and Labor Plus 1 Year Parts OnlyOther Components 18 Months |
Certifications
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
What Our Customers Say

