Hatco HWBI-S2 Drop-In Modular Slim Heated Well, 2 Full-Size Wells, Insulated, 208/240V
Two full-size hot wells set lengthwise in a 15.625" deep unit, so food stays within easy reach behind a sneeze guard.
The Hatco HWBI-S2 is a slim drop-in modular heated well: 2 insulated full-size (12" x 20") wells placed lengthwise in one top-mount unit, 45.5" W x 15.625" D. Each well has its own thermostatic control, and a lighted On/Off switch keeps the settings. This version has no drains. It runs on 208V or 240V, single phase or optional three phase.
Measure the counter depth behind the sneeze guard: the whole unit is 15.625" deep.
The 2 full-size wells run lengthwise, so the whole unit is only 15.625" deep and every pan stays within easy reach.
Each well has its own thermostat and temperature dial, plus a lighted On/Off rocker switch that keeps the setting.
Insulation on the sides and bottom holds heat in, speeds pre-heat and recovery, and keeps surrounding surfaces cooler.
The wells are designed for wet or dry operation; without drains you fill and empty them by hand.
Stainless steel wells with solid brazed drain fitting joints, easy service access to elements and thermostats, and EZ locking hardware.
Cut the countertop 44.125 to 44.375" wide and 14.25" to 14.50" deep. The unit is 45.5" W x 15.625" D x 9.56" H. Leave at least 3-1/2" below the unit to any combustible surface.
Order 208V or 240V, single phase, or three-phase wiring (field convertible). It draws 208V 1-Ph 11.6 A, 240V 1-Ph 10.1 A, 208V 3-Ph 10.1 A, 240V 3-Ph 8.7 A.
No. It is hard wired as standard. Hatco offers a factory cord (NEMA 6-15P at 208V or 240V) for single-phase units with a single control box, at time of order.
Each well takes a full-size pan, or half-size and third-size pans; adapters that hold two 7-quart or three 4-quart round pans and 12" pan support bars are sold separately.
Hatco's limited warranty covers the metal-sheathed heated well element for 1 year parts and labor plus 1 more year parts only. Other parts carry Hatco's standard 18-month limited warranty. Register the unit with Hatco within 90 days of factory shipment to qualify for added coverage.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | HWBI-S2 |
| Series | Drop-In Modular/Ganged Slim Heated Wells, Insulated, Top Mount |
| Shipping Weight | 83 lb. |
| Width | 45.5 Inches |
| Depth | 15.625 Inches |
| Height | 9.56 Inches |
| Countertop Cutout | 44.125 to 44.375 Inches W x 14.25 to 14.50 Inches D |
| Capacity | 2 Full-Size 12 x 20 Inch Pans |
| Number of Wells | 2, Placed Lengthwise |
| Voltage | 208 or 240 Volts |
| Phase | Single Phase StandardThree Phase Optional, Field Convertible |
| Wattage | 2415 Watts |
| Amps | 208V 1-Ph: 11.6 A240V 1-Ph: 10.1 A208V 3-Ph: 10.1 A240V 3-Ph: 8.7 A |
| Plug Type | Hard WiredOptional Cord with NEMA 6-15P, Single Phase and Single Control Box Only |
| Control Type | Thermostatic Control per WellLighted On/Off Rocker Switch |
| Control Box | Single Control Box Standard |
| Conduit | 6 ft Flexible Conduit |
| Drain | No Drain |
| Construction | Stainless Steel WellsStainless and Aluminized Steel HousingInsulated Sides and Bottom |
| Heating Element | Metal Sheathed |
| Mounting | Top Mount, Drop-InEZ Locking Hardware |
| Operation | Wet or Dry |
| Factory Options | Three-Phase WiringCopper Manifold Drain with Side or Bottom ExitCord for Single Phase19 Inch Deep Bezel to Match Hatco CWBP-S WellsFactory-Installed GasketAt Time of Purchase Only |
| Accessories | 1-Pan Heated Well CoversFood PansRound Pan Adapters12 Inch Pan Support BarsBall and Gate ValvesRemote Drain Handle |
| Certifications | cULus, UL EPH |
| Agency Listing | UL and C-UL ListedUL EPH Sanitation Listing per ANSI/NSF 4Specify Agency at Order |
| Country of Origin | Made in USA |
| Warranty | Heated Well Element 1 Year Parts and Labor Plus 1 Year Parts OnlyOther Parts 18 Months |
Certifications
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
