Hatco HWBL-FUL Built-In Full-Size Heated Well, Uninsulated, Low Watt, Top or Bottom Mount, 120V
Description
A full-size hot well that runs on a standard 120V circuit, for steam tables and buffet counters.
The Hatco HWBL-FUL is an uninsulated, low watt built-in heated well for one full-size (12" x 20") pan, 13.68" W x 21.76" D x 9.32" H. It mounts from the top with EZ locking hardware or to the underside of a counter. At 750 W it draws 6.3 A on 120V, and a remote thermostat with a separate lighted power switch sits on a 36" conduit. This version has no drain.
Will it fit · Will it hook up
- Outside size
- 13.68" W x 21.76" D x 9.32" H; 15.14" H with the optional cord
- Countertop cutout
- Non-combustible: 12.625" to 12.94" W x 20.625" to 20.94" D. Combustible: 14" to 14.25" W x 22" to 22.25" D with the mounting kit (top mount)
- Power
- 120V single phase, 750 W, 6.3 A. Hard wired through a 36" conduit to the control box; optional cord with a NEMA 5-15P plug
- Controls
- Compact thermostatic control with bezel standard; WM assembly or larger recessed thermostatic control optional
The cord is a factory option: order it with the well if you want to plug in.
Runs on 120V
The low watt 750 W element draws 6.3 A at 120V single phase; an optional cord adds a NEMA 5-15P plug.
Top or bottom mount
Mount it from the top with EZ locking hardware, or to the underside of a sheet metal counter.
Thermostat and switch
A remote thermostat with a separate lighted On/Off switch keeps your preset temperature.
Flexible pan setup
Holds a full-size pan or smaller pans; accessory adapters hold three 4-quart or two 7-quart round inserts.
Square corners option
Order square pan corners in place of the standard rounded corners at time of purchase.
Delivery and setup
- Inspect the carton for damage before you sign, and note any damage on the delivery receipt. Approximate shipping weight is 22 lb.
- A qualified electrician must install the unit to local electrical codes. Installation by unqualified personnel voids the Hatco warranty.
- Mount the remote control box on a vertical wall at least 6" from the well and no more than 72" away.
- Combustible countertops need the Hatco mounting kit accessory for top mounting.
- Let the well cool to room temperature before you switch between wet and dry operation, and never let it run dry while set up for wet operation.
Questions buyers ask
What size cutout do I need?
In a non-combustible counter, cut 12.625" to 12.94" W x 20.625" to 20.94" D. In a combustible counter, cut 14" to 14.25" W x 22" to 22.25" D and use the accessory mounting kit.
What power does it need?
120V single phase, 750 W, 6.3 A. It is hard wired as standard; the optional HWB cord adds a NEMA 5-15P plug and makes the unit 15.14" tall.
Is it insulated?
No. This is the uninsulated version. Hatco makes the insulated low watt model as the HWBLI-FUL.
Can I hold food wet?
Yes. Hatco designs these wells for wet or dry use. This model has no drain, so you fill and empty it by hand; let it cool before switching modes.
What warranty does it have?
Hatco's limited warranty covers the metal-sheathed heated well element for 1 year parts and labor plus 1 more year parts only. Other parts carry Hatco's standard 18-month limited warranty. Register the unit with Hatco within 90 days of factory shipment to qualify for added coverage.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | HWBL-FUL |
| Series | Built-In Full-Size Uninsulated Heated Wells, Low Watt |
| Shipping Weight | 22 lb. |
| Width | 13.68 Inches |
| Depth | 21.76 Inches |
| Height | 9.32 Inches |
| Height with Optional Cord | 15.14 Inches |
| Countertop Cutout | Non-Combustible: 12.625 to 12.94 Inches W x 20.625 to 20.94 Inches DCombustible: 14 to 14.25 Inches W x 22 to 22.25 Inches D with Mounting Kit |
| Capacity | 1 Full-Size 12 x 20 Inch Pan |
| Voltage | 120 Volts |
| Phase | Single |
| Wattage | 750 Watts |
| Amps | 6.3 Amps |
| Plug Type | Hard WiredOptional Cord with NEMA 5-15P |
| Control Type | Compact Thermostatic with BezelLighted On/Off Rocker Switch |
| Conduit | 36 Inch Flexible Conduit Standard72 Inch Optional |
| Drain | No Drain |
| Construction | Stainless SteelUninsulated |
| Heating Element | Metal Sheathed, Low Watt |
| Mounting | Top or Bottom MountEZ Locking Hardware for Top Mount |
| Factory Options | Additional Lead Wire72 Inch ConduitCordThermostat with 6 ft CapillaryWM Assembly or Larger Recessed ControlDesigner Color Control BezelSquare Pan CornersAt Time of Purchase Only |
| Accessories | Food PansWire TrivetsRound Pan Adapters12 or 20 Inch Support BarsMounting Kit for Combustible or Thick Countertops |
| Certifications | cULus, UL EPH |
| Agency Listing | UL and C-UL ListedUL EPH Sanitation Listing per ANSI/NSF 4Specify Agency at Order |
| Country of Origin | Made in USA |
| Warranty | Heated Well Element 1 Year Parts and Labor Plus 1 Year Parts OnlyOther Parts 18 Months |
Certifications
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
What Our Customers Say

