Hatco HWBLRT-43D Drop-In 4/3-Size Uninsulated Heated Well with Drain, Fabricator Component, Thermostat, Low Watt 750W, 120V
Description
A 4/3-size heated well component that lets a fabricator build hot food holding into a custom steam table or serving counter.
The Hatco HWBLRT-43D is a drop-in 4/3-size heated well, uninsulated, built as a UR and C-UR recognized fabricator component. It holds four 1/3-size pans, a full-size plus a 1/3-size pan, or other combinations with adapter bars. This low-watt version runs on 120V at 750 W and 6.3 A. It comes with a thermostat control with a lit ON/OFF rocker switch on a 36" capillary, but without conduit or a control box enclosure; the fabricator wires it and must obtain UL approvals for the finished unit. A 3/4" NPT drain with a flat drain screen makes emptying and cleaning easy.
Will it fit · Will it hook up
- Outside size
- 13.58" W x 28.58" D x 9.34" H
- Counter cutout
- Non-combustible counter: 12.69" to 12.94" W x 27.69" to 28" D; combustible counter: 14" to 14.25" W x 29" to 29.25" D with the accessory mounting kit
- Mounting
- Top mount only, EZ locking hardware
- Power
- 120V single phase, 750 W, 6.3 A; hardwired by the fabricator
- Control panel cutout
- 2.125" W x 3.375" H for the thermostat control
- Drain
- 3/4" NPT drain fitting; connect to a drain valve and the site drain line
Leave at least 3-1/2" from the bottom of the well to any combustible surface, and allow extra room below the counter for the drain.
Thermostat control
A thermostat control with a lit ON/OFF rocker switch comes on a 36" capillary, ready to mount in your counter panel.
Larger flat-screen drain
The 3/4" NPT drain is 50% larger, and its flat screen keeps pans level and simplifies cleaning.
Built for fabricators
Ships without conduit or control box enclosure, so the control can be laid out in your own steam table.
Wet or dry use
Hatco built-in wells run wet or dry; Hatco recommends wet operation for consistent food heating.
Heavy stainless build
Thicker stainless steel with solid brazed joints, and easy service access to elements and thermostats.
Delivery and setup
- Inspect the carton for damage before you sign, and note any damage on the delivery receipt.
- Units are voltage-specific: check the specification label before installation.
- A qualified electrician should connect power and a qualified plumber should connect the drain; installation must meet local electrical and plumbing codes.
- Install indoors where room air is at least 70°F, in or on a counter rated for prolonged temperatures up to 200°F; Hatco recommends metal countertops.
- This is a UR fabricator component: conduit and control enclosures are not included, and the fabricator must obtain UL approvals.
- Pans, lids, adapter bars and adapter tops are sold separately.
Questions buyers ask
What countertop cutout do I need?
Non-combustible counter: 12.69" to 12.94" W x 27.69" to 28" D. Combustible counter: 14" to 14.25" W x 29" to 29.25" D with the accessory mounting kit.
What power does it need?
120V single phase, 750 W, 6.3 A. The fabricator wires it.
What does UR fabricator component mean?
The well uses UL recognized (UR and C-UR) components and ships without conduit or a control box enclosure. The fabricator installs it in a steam table and must obtain UL approvals.
What is the difference between RT and RN?
RT means thermostat control with a lit rocker switch and 36" capillary. RN means infinite switch control with a pilot light and 36" leads.
What pans fit?
One full-size pan plus one 1/3-size pan, four 1/3-size pans or two 1/2-size pans plus one 1/3-size pan with adapter bars; two 11-quart round pans with an adapter top. Pans and adapters are sold separately.
Can I run it wet or dry?
Yes. Hatco recommends wet operation with hot tap water up to 1-1/4" deep. Let the well cool to room temperature before switching between wet and dry, and preheat about 30 minutes.
What warranty does it have?
Hatco gives 1 year parts and on-site labor, plus 1 additional year parts-only on the metal-sheathed heated well element.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | HWBLRT-43D |
| Series | Drop-In 4/3-Size UR Components |
| Type | Drop-In 4/3-Size Uninsulated Heated Well, UR Fabricator Component |
| Wattage Class | Low Watt |
| Shipping Weight | 33 lb. |
| Width | 13.58 Inches |
| Depth | 28.58 Inches |
| Height | 9.34 Inches |
| Countertop Cutout, Non-Combustible | 12.69" to 12.94" W x 27.69" to 28" D |
| Countertop Cutout, Combustible | 14" to 14.25" W x 29" to 29.25" D with the accessory mounting kit |
| Control Panel Cutout | 2.125" W x 3.375" H |
| Capacity | 4/3-Size Opening, 12" x 27" Base |
| Pan Configurations | 4/3-Size Opening, 12" x 27" BaseFull-Size plus 1/3-Size, Four 1/3-Size, or Two 1/2-Size plus One 1/3-Size Pans with Adapter BarsTwo 11 Qt. Round Pans with Adapter Top |
| Voltage | 120 Volts |
| Phase | Single |
| Wattage | 750 Watts |
| Amps | 6.3 Amps |
| Plug Type | Hardwired |
| Connection | Wired by the FabricatorNo Conduit or Control Box Enclosure Included |
| Control Type | Thermostat Control with Lit ON/OFF Rocker Switch36" Capillary |
| Mounting | Top Mount OnlyEZ Locking Hardware |
| Drain | 3/4" NPT Drain FittingFlat Drain Screen |
| Wet or Dry | Wet or Dry OperationWet RecommendedPreheat About 30 Minutes |
| Construction | UninsulatedStainless and Aluminized Steel HousingMetal-Sheathed Heating ElementSolid Brazed Joints |
| Pan Corners | Round Corners Standard |
| Factory Options | Thermostat with 6' Capillary for RT Components |
| Accessories | Stainless Steel Food PansWire TrivetsAdapter for Round PansSupport BarsMounting Kit for Combustible Countertops3/4" Ball or Gate ValveRemote Drain Handle |
| Certifications | cURus |
| Listing Detail | UR and C-UR Recognized ComponentsConduit and Control Enclosures Not IncludedFabricator Must Obtain UL Approvals |
| Country of Origin | Made in USA |
| Warranty | 1 Year Parts and On-Site Labor |
| Element Warranty | Heated Well Element: 1 Additional Year Parts-Only |
| Service | 24/7 Parts and Service Assistance, US and Canada |
Certifications
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
What Our Customers Say

