Hatco HWBRN-7QTD Drop-In 7 Qt. Round Heated Well with Drain, Fabricator Component, Infinite Control, 120/208/240V
Description
A 7-quart round heated well component that lets a fabricator build hot food holding into a custom steam table or serving counter.
The Hatco HWBRN-7QTD is a drop-in 7-quart round heated well, uninsulated, built as a UR and C-UR recognized fabricator component. It holds one 7-quart round pan. It is a standard-watt well built for 120, 208 or 240V single phase, set when you order. It comes with an infinite switch control with a pilot light on 36" leads, but without conduit or a control box enclosure; the fabricator wires it and must obtain UL approvals for the finished unit. A 3/4" NPT drain with a flat drain screen makes emptying and cleaning easy.
Will it fit · Will it hook up
- Outside size
- 10.31" diameter x 9.6" H
- Counter cutout
- Non-combustible counter: 9.125" to 9.56" diameter; combustible counter: 11" to 11.25" square with the accessory mounting kit
- Mounting
- Top mount, EZ locking hardware
- Power
- 120V: 500 W, 4.2 A; 208V: 536 W, 2.6 A; 240V: 600 W, 2.5 A; single phase, voltage chosen at order; hardwired by the fabricator
- Control panel cutout
- 2.125" W x 3.375" H for the infinite switch control
- Drain
- 3/4" NPT drain fitting; connect to a drain valve and the site drain line
Leave at least 3-1/2" from the bottom of the well to any combustible surface, and allow extra room below the counter for the drain.
Infinite control
An infinite switch control with a pilot light comes on 36" leads, ready to mount in your counter panel.
Flat-screen drain
The 3/4" NPT drain has a flat drain screen that keeps pans level and makes cleaning easy.
Built for fabricators
Ships without conduit or control box enclosure, so the control can be laid out in your own steam table.
Wet or dry use
Hatco built-in wells run wet or dry; Hatco recommends wet operation for consistent food heating.
Easy to service
Stainless and aluminized steel housing with a metal-sheathed element; easy to install and easy to service.
Delivery and setup
- Inspect the carton for damage before you sign, and note any damage on the delivery receipt.
- Units are voltage-specific: check the specification label before installation.
- A qualified electrician should connect power and a qualified plumber should connect the drain; installation must meet local electrical and plumbing codes.
- Install indoors where room air is at least 70°F, in or on a counter rated for prolonged temperatures up to 200°F; Hatco recommends metal countertops.
- This is a UR fabricator component: conduit and control enclosures are not included, and the fabricator must obtain UL approvals.
- Pans, lids, adapter bars and adapter tops are sold separately.
Questions buyers ask
What countertop cutout do I need?
Non-combustible counter: 9.125" to 9.56" diameter. Combustible counter: 11" to 11.25" square with the accessory mounting kit.
What voltage do I order?
120V: 500 W, 4.2 A; 208V: 536 W, 2.6 A; 240V: 600 W, 2.5 A; single phase, voltage chosen at order. Hatco builds the well for one voltage, so order the one you have. The fabricator wires it.
What does UR fabricator component mean?
The well uses UL recognized (UR and C-UR) components and ships without conduit or a control box enclosure. The fabricator installs it in a steam table and must obtain UL approvals.
What is the difference between RT and RN?
RT means thermostat control with a lit rocker switch and 36" capillary. RN means infinite switch control with a pilot light and 36" leads.
What pans fit?
One 7-quart round pan. Pans and adapters are sold separately.
Can I run it wet or dry?
Yes. Hatco recommends wet operation with hot tap water up to 1-1/4" deep. Let the well cool to room temperature before switching between wet and dry, and preheat about 30 minutes.
What warranty does it have?
Hatco gives 1 year parts and on-site labor, plus 1 additional year parts-only on the metal-sheathed heated well element.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | HWBRN-7QTD |
| Series | Drop-In Round UR Components |
| Type | Drop-In 7 Qt. Round Heated Well, UR Fabricator Component |
| Wattage Class | Standard Watt |
| Shipping Weight | 10 lb. |
| Width | 10.31 Inches |
| Depth | 10.31 Inches |
| Height | 9.6 Inches |
| Diameter | 10.31 Inches |
| Countertop Cutout, Non-Combustible | 9.125" to 9.56" diameter |
| Countertop Cutout, Combustible | 11" to 11.25" square with the accessory mounting kit |
| Control Panel Cutout | 2.125" W x 3.375" H |
| Capacity | 7 Qt. Round Pan |
| Pan Configurations | One 7 Qt. Round Pan |
| Voltage | 120, 208 or 240 Volts |
| Phase | Single |
| Wattage | 500 W at 120V536 W at 208V600 W at 240V |
| Amps | 4.2 A at 120V2.6 A at 208V2.5 A at 240V |
| Plug Type | Hardwired |
| Connection | Wired by the FabricatorNo Conduit or Control Box Enclosure Included |
| Control Type | Infinite Switch Control with Pilot Light36" Leads |
| Mounting | Top MountEZ Locking Hardware |
| Drain | 3/4" NPT Drain FittingFlat Drain Screen |
| Wet or Dry | Wet or Dry OperationWet RecommendedPreheat About 30 Minutes |
| Construction | UninsulatedStainless and Aluminized Steel HousingMetal-Sheathed Heating Element |
| Factory Options | Additional Power Supply Lead Wire in 1' Increments for RN Components |
| Accessories | 7 Qt. Round Pan7 Qt. Notched or Hinged LidMounting Kit for Combustible or Thicker Countertops3/4" Ball or Gate ValveRemote Drain Handle |
| Certifications | cURus |
| Listing Detail | UR and C-UR Recognized ComponentsConduit and Control Enclosures Not IncludedFabricator Must Obtain UL Approvals |
| Country of Origin | Made in USA |
| Warranty | 1 Year Parts and On-Site Labor |
| Element Warranty | Heated Well Element: 1 Additional Year Parts-Only |
| Service | 24/7 Parts and Service Assistance, US and Canada |
Certifications
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
What Our Customers Say

