Hatco HXMH-36D Heated LED Merchandiser, 36" Horizontal Dual Shelf, 39.9" W, 120/208-240V
Description
A 36-inch two-shelf heated merchandiser that keeps hot packaged food warm and lit for grab-and-go customers.
The Hatco HXMH-36D is a 36" horizontal dual shelf Heated LED Merchandiser, 39.9" wide overall. Infrared heat from above and a thermostatically controlled heated base shelf hold hot packaged food, and LED lighting on each shelf shows it off. Each shelf gives 34.34" x 21.75" of heated space with 14 divider rods. It comes in Designer Black and runs on 120/208-240V, 2200 W with a NEMA L14-20P plug.
Will it fit · Will it hook up
- Outside size
- 39.9" W x 28.56" D x 32.86" H; height includes the base legs
- Power
- 120/208-240V single phase, 2200 W, 9.2 A; 6 ft. cord with NEMA L14-20P plug
- Clearance
- At least 3" from the back of the unit to a wall; indoor use only, in a room of at least 70°F
- Counter
- Level counter strong enough for the 205 lb. shipping weight plus food; keep away from hoods, A/C ducts and exterior doors
Have a grounded NEMA L14-20P receptacle of the right voltage within reach of the 6 ft. cord before the unit arrives.
Infrared top heat
Infrared cal-rod elements over each shelf hold hot packaged food for grab-and-go sales.
Heated base shelf
A thermostatically controlled heated base, with 34.34" x 21.75" of heated space per shelf and 14 divider rods.
LED lighting
High efficiency LED lighting on each shelf lights the food and saves energy.
Swing-out glass
Hinged glass side panels are held in place by magnets and swing out for easy cleaning.
Designer Black
Black is standard. Warm Red, Gray Granite, White Granite, Navy Blue, Hunter Green, Antique Copper and red LED accent lighting in the posts are factory options.
Delivery and setup
- Inspect the carton for damage before you sign, and note any damage on the delivery receipt. Approximate shipping weight is 205 lb.
- Hatco ships the merchandiser mostly assembled. Plan two or more people to unpack and place it, and do not lay it on its front or back.
- Leave at least 3" between the back of the unit and a wall, on a level counter strong enough for the unit and food.
- Plug into a properly grounded receptacle that matches the NEMA L14-20P plug; if it does not match, have a qualified electrician install the right one.
- Allow about 30 minutes to reach operating temperature, and load only food that is already heated to a safe temperature. Food must be wrapped, boxed or in a pan.
Questions buyers ask
What outlet does it need?
120/208-240V single phase, 2200 W and 9.2 A, on a 6 ft. cord with a NEMA L14-20P plug. Specify 208V or 240V service when you order.
How much food does it hold?
Each shelf has 34.34" x 21.75" of heated space, with 14 adjustable divider rods to keep rows apart.
Is it for cooking?
No. It holds hot packaged food that is already heated to a safe temperature, for short-term grab-and-go holding.
Can I get it in a color?
Yes, at the time of purchase. Designer Black is standard; Warm Red, Gray Granite, White Granite, Navy Blue, Hunter Green, Antique Copper are factory options. Non-standard colors are non-returnable.
What certifications does it have?
The spec sheet shows cULus and UL EPH Classified to ANSI/NSF 4 marks. It is made in the USA.
What is the warranty?
Hatco covers defects in materials and workmanship for 18 months from shipment or registration, whichever is later. Bulbs, glass and fuses are not covered. Register within 90 days of shipment.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | HXMH-36D |
| Series | Heated LED Merchandiser, Horizontal |
| Shipping Weight | 205 lb. |
| Width | 39.9 Inches |
| Depth | 28.56 Inches |
| Height | 32.86 Inches |
| Dimension Notes | Height Includes Base Legs |
| Usable Heated Shelf Space | 34.34" x 21.75" per Shelf |
| Shelves | 2, Horizontal |
| Divider Rods | 14 |
| Display Lights | LED Lighting on Each Shelf |
| Voltage | 120/208-240 Volts |
| Phase | Single Phase |
| Wattage | 2200 Watts |
| Amps | 9.2 Amps |
| Plug Type | NEMA L14-20P |
| Cord | 6 ft. Cord and Plug, Server Side |
| Top Heat | Infrared Cal-Rod Elements |
| Heated Base | Thermostatically Controlled |
| Controls | Temperature Control and Power On/Off Switch |
| Side Panels | Hinged Tempered Glass, Held Magnetically, Swing Out for Cleaning |
| Standard Color | Designer Black |
| Standard Equipment | Heated BaseLED Lighting on Each ShelfProduct Divider RodsHinged Glass Side Panels6 ft. Cord and Plug |
| Designer Colors | Warm Red, Gray Granite, White Granite, Navy Blue, Hunter Green, Antique CopperNon-Standard Colors Non-Returnable |
| Factory Options | Red LED Accent Lighting in Support PostsIndicating Temperature ControlSneeze Guards, Customer SidePlexi-Glass Flip-Up Doors on One SideAt Time of Purchase Only |
| Accessories | Additional Stainless Steel Divider Rods |
| Certifications | cULus, UL EPH Classified ANSI/NSF 4 |
| Country of Origin | Made in USA |
| Warranty | 18 Month Hatco Limited Warranty |
| Warranty Details | Repair or replacement of defective parts for 18 months from shipment or registration, whichever is laterBulbs, LED lights, glass and fuses excluded24/7 parts and service assistance in US and Canada |
Certifications
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
What Our Customers Say

