Hatco HXMS-60D Heated LED Merchandiser, Slant Dual Shelf, 63.9" Wide, 120/208-240V
Description
A 63.9" wide two-shelf hot holding display that keeps wrapped grab-and-go food at serving temperature.
The Hatco HXMS-60D is a slant dual shelf Heated LED Merchandiser for convenience stores, cafeterias, concessions and self-serve hot food counters. It holds hot packaged food with infrared heat from above and a thermostatically controlled heated base, while LED lights show the product on each shelf. Hatco designs it for short-term holding of pre-heated food. It runs on 120/208-240V and comes in Designer Black.
Will it fit · Will it hook up
- Outside size
- 63.9" W x 28.13" D x 32.71" H; 291 lb. shipping weight
- Shelves
- 2 slant shelves; 58.34" x 21.75" usable heated shelf space per shelf, W x D
- Power
- 120/208-240V, 3,700 W, 15.4 A; NEMA L14-20P plug on a 6 ft. cord
- Circuit
- Needs a 120/208-240V receptacle that matches the NEMA L14-20P twist-lock plug
The cord leaves the unit at the left rear on the server side. Allow 3" of space from the back of the unit to a wall.
Infrared top heat
Infrared heat from above holds hot packaged food for breakfast, lunch, dinner and impulse sales.
Heated base shelf
A thermostatically controlled, hardcoated heated base keeps food warm from below. Temperature knobs set the heat.
LED shelf lighting
High-efficiency LED lighting on each shelf lights the food and uses less energy.
Swing-out glass sides
Hinged glass side panels are held by magnets and swing out for easy cleaning.
Divider rods included
24 stainless steel product divider rods ship with the unit to separate items; more are sold as an accessory.
Delivery and setup
- Inspect the carton for damage before you sign, and note any damage on the delivery receipt.
- The unit ships at about 291 lb. Hatco says two or more people are needed to unpack and install it, and it must not be laid on its front or back.
- Have a grounded 120/208-240V receptacle for the NEMA L14-20P plug within reach of the 6 ft. cord.
- Set it on a level counter strong enough for the unit and food, indoors where the room stays at 70°F or warmer, away from exhaust fans, A/C ducts and exterior doors.
- Turn it on and allow 30 minutes to reach operating temperature before loading pre-heated food.
Questions buyers ask
What outlet does it need?
120/208-240V at 3,700 watts and 15.4 amps through a NEMA L14-20P plug on a 6 ft. cord. It is a 4-prong twist-lock plug, so have an electrician confirm the receptacle.
How much shelf space is there?
Each shelf has 58.34" x 21.75" of usable heated space. The unit ships with 24 divider rods.
Can I put food right on the shelf?
No. Hatco says food must be wrapped, boxed or on a food pan, not placed directly on the hardcoat surface. The unit is for holding pre-heated food only.
Is a digital temperature display available?
Yes. An Indicating Temperature Control is a factory option. It adds 1-7/8" to the depth of horizontal models and 1-3/4" to slant models. Its setpoint range runs from room temperature to 158°F.
Which colors and options can I order?
Designer Black is standard. Warm Red, Gray Granite, White Granite, Navy Blue, Hunter Green and Antique Copper are factory options, and non-standard colors are non-returnable. Red LED post lighting, customer-side sneeze guards and plexiglass flip-up doors are also factory options.
What warranty does it have?
Hatco gives an 18-month limited warranty from shipment or registration, whichever is later, with 24/7 parts and service assistance in the US and Canada. Glass and LED parts are excluded.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | HXMS-60D |
| Series | Heated LED Merchandiser, HXMS-xxD |
| Type | Countertop Slant Dual Shelf Heated LED Merchandiser |
| Shipping Weight | 291 lb. |
| Width | 63.9 Inches |
| Depth | 28.13 Inches |
| Height | 32.71 Inches |
| Height Note | Height includes legs |
| Usable Heated Shelf Space | 58.34" x 21.75" W x D per shelf |
| Shelves | 2 Slant |
| Divider Rods | 24 Included |
| Voltage | 120/208-240 Volts |
| Wattage | 3,700 Watts |
| Amps | 15.4 Amps |
| Plug Type | NEMA L14-20P |
| Cord | 6 ft.Left Rear, Server Side |
| Heating | Infrared Cal-Rod Top HeatThermostatically Controlled Hardcoated Heated Base |
| Control Type | Thermostatic Temperature ControlPower On/Off Switch |
| Lighting | LED on Each Shelf |
| Exterior | Designer Black Powder CoatHinged Tempered Glass Side Panels |
| Coating | IFS Anti-Microbial Powder Coat |
| Factory Options | Designer ColorsRed LED Post LightingIndicating Temperature ControlCustomer-Side Sneeze GuardsPlexiglass Flip-Up Doors |
| Accessories | Additional Stainless Steel Divider Rods |
| Certifications | cULus, UL EPH Classified ANSI/NSF 4 |
| Country of Origin | Made in the USA |
| Warranty | 18 Months Limited |
| Warranty Notes | From shipment or product registration, whichever is later24/7 parts and service assistance in US and CanadaLED light tubes and glass components excluded |
Certifications
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
What Our Customers Say

