Hatco HZMS-60 Spot-On Slant Heated Zone Merchandiser, 60" Heated Width, Single Shelf, 6 Zones, 120V, NEMA 5-30P
A self-serve countertop warmer that shows wrapped hot food on slanted heated shelves and only heats the zones that hold product.
The Hatco HZMS-60 is a 64" wide slant single shelf Heated Zone Merchandiser for convenience stores, concessions and grab-and-go counters. Each shelf has 6 overhead zones with fast ribbon elements, and Spot-On technology turns a zone's overhead heat on only when optical sensors see product there. The heated base drops to an energy-saving stand-by level when the zone is empty. It comes in Designer Black with LED lights above the shelf, divider rods, hinged glass side panels and a 6 ft. cord with a NEMA 5-30P plug.
Check that a NEMA 5-30P receptacle on a dedicated circuit is within reach of the 6 ft. cord at the left rear.
Optical sensors along each shelf tell the LCD controller where product sits, and only those of the 6 overhead zones heat. Empty zones fall back to stand-by.
Hatco rates the overhead ribbon elements to reach temperature in under 10 seconds once product is placed.
The slanted hardcoat shelves face product toward the customer. Each shelf has separate front and rear heating elements, factory set to 180°F.
Each shelf can run Sensors ON (zone heat), Sensors OFF (all elements on full time) or Lights Only. The LCD scans and shows each zone setting.
Hinged glass side panels swing out for cleaning, and the product divider rods hold in place with magnets for more usable heated surface.
Standard in Designer Black with IFS anti-microbial powder coat. Warm Red, Gray Granite, White Granite, Navy Blue, Hunter Green and Antique Copper are factory options.
120V single phase, 2,150 watts, 17.9 amps, on a dedicated circuit. It ships with a 6 ft. cord and a NEMA 5-30P plug; the receptacle is not included.
Overhead elements stay off until sensors detect product in a zone. With no product, the shelf elements run at stand-by power. Once product is placed, that zone heats at its set power level.
No. Hatco says food must be wrapped, boxed or on a food pan, and pre-heated to a safe temperature. The unit is for holding, not cooking.
Hatco presets the hardcoat shelf elements to 180°F, and you can change the setpoint, operating mode and overhead power percentage on the LCD controller.
Factory options at purchase: Designer colors, red LED accent lights in the support posts, wire guards, a 5" customer-side sneeze guard or plexi-glass flip-up doors (not in the same opening). Extra stainless divider rods can be added any time.
Hatco's limited warranty runs 18 months from shipment or registration, whichever is later. Hatco also offers 24/7 parts and service assistance in the US and Canada.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | HZMS-60 |
| Series | Heated Zone Merchandiser, Spot-On Technology |
| Type | Slant Single Shelf Heated Zone Merchandising Warmer, Countertop |
| Shipping Weight | 216 lb. |
| Width | 64 Inches |
| Depth | 28-1/8 Inches |
| Height | 21-3/4 Inches |
| Height Note | Height Includes Legs |
| Shelves | 1 Slanted Shelf |
| Heat Zones | 6 per Shelf6 Total Overhead Zones |
| Heated Surface per Zone | 17-13/16" W x 21-3/4" D |
| Divider Rods | 9, Stainless Steel, Magnetic |
| Voltage | 120 Volts |
| Phase | 1 |
| Wattage | 2,150 Watts |
| Amps | 17.9 Amps |
| Plug Type | NEMA 5-30P |
| Cord | 6 ft., Left Rear Corner Toward Server Side |
| Controller | LCD ControllerModes: Sensors ON, Sensors OFF, Lights Only per Shelf |
| Factory Setpoint | Shelf 180°FFront Shelf Element Stand-By 50%, Rear 0%Front Overhead 75%, Rear 50% of Front |
| Heating | Overhead Infrared Ribbon ElementsHeated Hardcoat Shelf, Separate Front and Rear Elements |
| Side Panels | Hinged Glass, Swing Out for Cleaning |
| Lighting | LED Above the Shelf |
| Color | Designer BlackIFS Anti-Microbial Powder Coat |
| Designer Colors | Warm Red, Gray Granite, White Granite, Navy Blue, Hunter Green, Antique CopperNon-Returnable |
| Factory Options | Red LED Accent Lighting in Support PostsWire Guards5" Customer-Side Sneeze Guard or Plexi-Glass Flip-Up Doors, Not in Same Opening |
| Accessories | Additional Stainless Steel Divider Rods |
| Clearance | 3" Minimum From Rear of Unit to Back Wall |
| Ambient | Indoors, 70°F MinimumAvoid Air Currents From Hoods, Ducts and Doors |
| Certifications | cULus, UL EPH Classified ANSI/NSF 4 |
| Country of Origin | Made in USA |
| Warranty | 18 Months Limited |
| Warranty Notes | From Shipment or Registration, Whichever Is Later24/7 Parts and Service Assistance in US and Canada |
Certifications
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
