Hatco IWB-S1 Drop-In Slim Ice Well, One Full-Size Pan, 27-1/16" W x 19" D, Non-Refrigerated
Keeps pre-chilled salads, cold sides and bottled drinks on ice in a one-pan slim drop-in well, with no refrigeration or power to install.
The Hatco IWB-S1 is an insulated drop-in slim ice well that holds one full-size food pan, placed lengthwise over a bed of ice. It has no refrigeration or electrical parts: you fill it with ice, set pre-chilled food in the pans and drain the melt water through a 1" brass drain. The bezel design lets cold air blanket the food and gives guests a clear view and easy reach. It sits in a 27-1/16" x 19" countertop opening and suits salad bars, cold buffets and chilled beverage bars.
Cut the counter to the 25-1/4" to 26-1/16" x 17-1/16" to 17-15/16" range Hatco gives, and brace the counter for the weight of the well, ice and food.
The well is cooled by ice only, so there is no compressor, cord or refrigerant line to run under the counter.
Insulation on the sides and bottom holds the cold longer, so the ice lasts and you refill less often.
The angled inside wall lets cold air blanket the food and gives guests a clear view and easy access to the pans.
A larger 1" brass drain with a flat screen lets melt water run off and keeps the well simple to clean.
The IWB-S1 matches the look of Hatco heated and refrigerated drop-in wells for a uniform serving line.
No. The well is cooled by ice only and has no refrigeration or electrical components. You only need a drain connection or a catch pan under the drain fitting.
Fill the well with ice, leaving room for the pans, set the empty pans in, then add food that is already chilled to a safe temperature. Hatco notes the well holds cold more efficiently when every pan position is filled.
Hatco lists 1FBS8 (8" deep, sits on the bottom of the well and leaves room for 8" of ice) or 1FBS3.5 (hangs from the pan ledge, 3-1/2" of ice), each with one 1-pan insert. False bottoms hold the ice above the drain for better draining.
Hatco lists no pan support bar for the IWB-S1, so plan the well around one full-size pan footprint.
Two factory options are available only at the time of purchase: the IWB-S1SLANT slant kit that tilts the well 5 degrees (water will not fully drain with the slant installed) and the BEZELGASKET-S1 factory-installed gasket that replaces silicone sealant.
Hatco warrants its products against defects in materials and workmanship for 18 months for parts not listed with a different term in its limited warranty. Register the unit online with Hatco within 90 days of factory shipment.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | IWB-S1 |
| Series | IWB-S Drop-In Slim Ice Wells |
| Shipping Weight | 58 lb. |
| Width | 27-1/16 Inches |
| Depth | 19 Inches |
| Height | 14-1/16 Inches |
| Well Height | 12 Inches |
| Countertop Cutout | 25-1/4 to 26-1/16 Inches Wide x 17-1/16 to 17-15/16 Inches Deep |
| Capacity | 1 Full-Size Pan |
| Pan Layout | Full-Size Pans Placed Lengthwise |
| Cooling Method | Ice, No Refrigeration or Electrical Components |
| Drain | 1 Inch NPT Brass Drain with Flat Screen |
| Construction | Insulated Sides and BottomStainless Steel Interior and BezelAluminized Steel Housing |
| Mounting | Top Mount, Drop-In |
| Factory Options | IWB-S1SLANT 5 Degree Slant KitBEZELGASKET-S1 Factory-Installed GasketAt Time of Purchase Only |
| False Bottoms | 1FBS8 8 Inch, Sits on Well Bottom1FBS3.5 3-1/2 Inch, Hangs from Pan Ledge |
| Pan Support Bars | Not Available for IWB-S1 |
| Other Accessories | Stainless Steel Food Pans 2-1/2, 4 and 6 Inch DeepStainless Steel Wire Trivets |
| Certifications | NSF |
| Country of Origin | Made in USA |
| Warranty | 18 Months Limited |
Certifications
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
