Hatco MC-10 Mini-Compact Electric Booster Water Heater, 9.9 kW, 3.2 Gal., 208V

Hatco MC-10 Mini-Compact Electric Booster Water Heater, 9.9 kW, 3.2 Gal., 208V

HatcoSKU: HAT-MC-10

Voltages
  • Warranty · Tank 1-yr Parts and Labor Plus 9-yr Parts Only · Other Parts 18 Months

Secure checkout

Apple Pay Diners ClubDiscoverGoogle Pay Mastercard Shop Pay Visa

Talk to an equipment specialist

Mon–Sat 8 AM–5 PM ET

Questions about size, power, delivery or a quote for several units?

Call

Will it fit · Will it plug in

Outside (W × D × H)11.72" × 12.88" × 18.5"
Power208V
Capacity3.2 Gallons
Shipping weight48 lb.
ListedcULus, NSF

Highlights

  • 9.9 kW electric booster: 99 GPH at a 40°F rise, 57 GPH at a 70°F rise, for a 180°F final rinse
  • 3.2-gallon stainless steel tank with fiberglass insulation
  • Order in 208V 1-phase or 208V 3-phase; hard wired
  • 11.72" W x 12.88" D x 18.5" H on standard 6" legs
  • Low-water cut-off, high-temperature limit, relief valve, pressure reducing valve and two gauges included
  • cULus and NSF listed; tank has a 1-year parts and labor plus 9-year parts-only warranty

Specifications

ManufacturerHatco
Model NumberMC-10
SeriesMini-Compact Electric Booster Water Heater
Shipping Weight48 lb.
Width11.72"
Depth12.88"
Height18.5"
Dimension NotesHeight Includes 6" Legs
Power Rating9.9 kW
Voltage208V
Hertz60 Hz
Phase1 or 3
Amp Draw and Breaker208V 1-Ph: 47.6 A, 60 A Breaker, 208V 3-Ph: 27.5 A, 40 A Breaker
Copper Wire Size208V 1-Ph: 6 AWG, 208V 3-Ph: 8 AWG
Phase ConversionMust Specify Phase, Not Field Convertible
ConnectionHard Wired, Breaker or Fused Disconnect by Electrical Contractor
Capacity3.2 Gallons
Recovery at 40°F Rise99 Gallons per Hour
Recovery at 70°F Rise57 Gallons per Hour
Output Temperature180°F Final Rinse
Water Connections3/4" NPT Inlet and Outlet
Water HardnessSoften Water Over 3.0 Grains per Gallon
Relief Valve Setting150 PSI, 210°F
TankStainless Steel
ExteriorStainless Steel Front Panel, Silver-Gray Hammertone Powder-Coated Body, Black Base
InsulationFiberglass
Control TypeImmersion Thermostat, High-Temperature Limit Switch, Low-Water Cut-Off, On/Off Switch
Standard EquipmentTemperature/Pressure Relief Valve, Pressure Reducing Valve, Two Temperature/Pressure Gauges, 6" Legs
Factory OptionsStainless Steel Body and Base, at Time of Purchase Only
AccessoriesBrass Pressure Reducing Valve, 6 to 7" Adjustable Stainless Steel Legs, Blended Phosphate Injection System, Not for Potable Water, Shock Absorber
CertificationscULus, NSF
Country of OriginMade in USA
WarrantyTank 1 Year Parts and Labor Plus 9 Years Parts Only, Other Parts 18 Months

Resources & Documents

Specs

Manufacturer Hatco
Model Number MC-10
Series Mini-Compact Electric Booster Water Heater
Shipping Weight 48 lb.
Width 11.72 Inches
Depth 12.88 Inches
Height 18.5 Inches
Dimension Notes Height Includes 6 Inch Legs
Power Rating 9.9 kW
Voltage 208 Volts
Hertz 60 Hz
Phase 1 or 3
Amp Draw and Breaker 208V 1-Ph: 47.6 A, 60 A Breaker208V 3-Ph: 27.5 A, 40 A Breaker
Copper Wire Size 208V 1-Ph: 6 AWG208V 3-Ph: 8 AWG
Phase Conversion Must Specify Phase, Not Field Convertible
Connection Hard Wired, Breaker or Fused Disconnect by Electrical Contractor
Capacity 3.2 Gallons
Recovery at 40°F Rise 99 Gallons per Hour
Recovery at 70°F Rise 57 Gallons per Hour
Output Temperature 180°F Final Rinse
Water Connections 3/4 Inch NPT Inlet and Outlet
Water Hardness Soften Water Over 3.0 Grains per Gallon
Relief Valve Setting 150 PSI, 210°F
Tank Stainless Steel
Exterior Stainless Steel Front PanelSilver-Gray Hammertone Powder-Coated BodyBlack Base
Insulation Fiberglass
Control Type Immersion ThermostatHigh-Temperature Limit SwitchLow-Water Cut-OffOn/Off Switch
Standard Equipment Temperature/Pressure Relief ValvePressure Reducing ValveTwo Temperature/Pressure Gauges6 Inch Legs
Factory Options Stainless Steel Body and Base, at Time of Purchase Only
Accessories Brass Pressure Reducing Valve6 to 7 Inch Adjustable Stainless Steel LegsBlended Phosphate Injection System, Not for Potable WaterShock Absorber
Certifications cULus, NSF
Country of Origin Made in USA
Warranty Tank 1 Year Parts and Labor Plus 9 Years Parts OnlyOther Parts 18 Months

Certifications

cULus
NSF
Call

Description

A small 9.9 kW electric heater that delivers 180°F water for hot water sanitizing from a 3.2-gallon tank that fits almost anywhere.

Hatco MC-10 Mini-Compact electric booster water heater on legs, front three-quarter view

The Hatco MC-10 is a 9.9 kW Mini-Compact electric booster water heater. It stores 3.2 gallons in a stainless steel tank and recovers 99 gallons per hour at a 40°F temperature rise, or 57 gallons per hour at a 70°F rise. Hatco builds the Mini-Compact for hot water sanitizing and point-of-use hot water, on standard 6" legs. Choose 208V 1-phase or 208V 3-phase power when you order.

Will it fit · Will it hook up

Outside size
11.72" W x 12.88" D x 18.5" H on the standard 6" legs; leave room to inspect and test the temperature/pressure relief valve
Power
208V 1-phase 47.6 A, 60 A breaker; 208V 3-phase 27.5 A, 40 A breaker. Hard wired: the electrician supplies the breaker or fused disconnect
Water
3/4" NPT inlet and outlet; incoming water over 3.0 grains per gallon hardness must be softened
Location
Indoors, 70°F room or warmer, as close to the dishmachine as possible; recirculate if the run is over 5 ft. (NSF)
Clearance
Front access to the controls; Hatco recommends at least 2" at the sides

Have the electrician confirm the voltage, phase and circuit before the heater arrives: Hatco electric boosters are hard wired with no cord or plug.

99 GPH recovery

At 9.9 kW the MC-10 heats 99 gallons per hour through a 40°F rise and 57 gallons per hour through a 70°F rise, for a 180°F final rinse.

Stainless steel tank

The 3.2-gallon stainless steel tank is wrapped in fiberglass insulation, and the heater recovers fast for its size.

Low-water cut-off

A low-water cut-off keeps the elements off when the tank is low, and a high-temperature limit switch adds a second safety.

Factory plumbed and wired

It arrives pre-plumbed and pre-wired with an immersion thermostat, temperature/pressure relief valve, pressure reducing valve and two temperature/pressure gauges.

Delivery and setup

  • Inspect the carton for damage before you sign, and note any damage on the delivery receipt. Approximate shipping weight is 48 lb.
  • Installation must be done by qualified installers to local electrical and plumbing codes. Installation by unqualified personnel voids the Hatco warranty.
  • Fill the tank with water before you turn on power: the elements burn out if they run dry.
  • Set the pressure reducing valve to 20 psi flow pressure, and do not fit a check valve or anti-siphon valve in the supply line to the booster.
  • Pipe the temperature/pressure relief valve discharge to a safe place of disposal, per local code.

Questions buyers ask

Is it big enough for my dishmachine?

Size it by the gallons per hour your dishmachine rinse uses and your incoming water temperature. The MC-10 recovers 99 GPH at a 40°F rise (140°F in, 180°F out) and 57 GPH at a 70°F rise (110°F in). If your machine uses more, step up in kW.

What electrical service does it need?

Pick the voltage and phase you have on site: 208V 1-phase draws 47.6 A on a 60 A breaker; 208V 3-phase draws 27.5 A on a 40 A breaker. It is hard wired by a licensed electrician.

Can the phase be changed later?

No. Mini-Compact heaters are not field convertible, so the phase must be specified when ordering.

Does my water need treatment?

Yes, if it is hard. Water over 3.0 grains of hardness per gallon must be treated and softened before it reaches the booster. Failure from liming or sediment is not covered by the warranty.

What warranty does it have?

Hatco covers the booster tank for 1 year parts and labor plus 9 more years parts only. Other parts carry Hatco's standard 18-month limited warranty. Register the unit with Hatco within 90 days of factory shipment to qualify for added coverage.

99 GPH at 40°F Rise180°F final rinse water.
3.2 Gal. TankStainless steel storage tank.
9.9 kW Electric208V; choose at order.
10-Year Tank Warranty1 yr parts and labor, 9 yr parts.

Specs

Manufacturer Hatco
Model Number MC-10
Series Mini-Compact Electric Booster Water Heater
Shipping Weight 48 lb.
Width 11.72 Inches
Depth 12.88 Inches
Height 18.5 Inches
Dimension Notes Height Includes 6 Inch Legs
Power Rating 9.9 kW
Voltage 208 Volts
Hertz 60 Hz
Phase 1 or 3
Amp Draw and Breaker 208V 1-Ph: 47.6 A, 60 A Breaker208V 3-Ph: 27.5 A, 40 A Breaker
Copper Wire Size 208V 1-Ph: 6 AWG208V 3-Ph: 8 AWG
Phase Conversion Must Specify Phase, Not Field Convertible
Connection Hard Wired, Breaker or Fused Disconnect by Electrical Contractor
Capacity 3.2 Gallons
Recovery at 40°F Rise 99 Gallons per Hour
Recovery at 70°F Rise 57 Gallons per Hour
Output Temperature 180°F Final Rinse
Water Connections 3/4 Inch NPT Inlet and Outlet
Water Hardness Soften Water Over 3.0 Grains per Gallon
Relief Valve Setting 150 PSI, 210°F
Tank Stainless Steel
Exterior Stainless Steel Front PanelSilver-Gray Hammertone Powder-Coated BodyBlack Base
Insulation Fiberglass
Control Type Immersion ThermostatHigh-Temperature Limit SwitchLow-Water Cut-OffOn/Off Switch
Standard Equipment Temperature/Pressure Relief ValvePressure Reducing ValveTwo Temperature/Pressure Gauges6 Inch Legs
Factory Options Stainless Steel Body and Base, at Time of Purchase Only
Accessories Brass Pressure Reducing Valve6 to 7 Inch Adjustable Stainless Steel LegsBlended Phosphate Injection System, Not for Potable WaterShock Absorber
Certifications cULus, NSF
Country of Origin Made in USA
Warranty Tank 1 Year Parts and Labor Plus 9 Years Parts OnlyOther Parts 18 Months

Certifications

cULus
NSF

Payment & Security

Apple Pay Diners Club Discover Google Pay Mastercard Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

What Our Customers Say

Related Products

Recently viewed