Hatco MC-11 Mini-Compact Electric Booster Water Heater, 11.4 kW, 3.2 Gal., 240/480V
A small 11.4 kW electric heater that delivers 180°F water for hot water sanitizing from a 3.2-gallon tank that fits almost anywhere.
The Hatco MC-11 is an 11.4 kW Mini-Compact electric booster water heater. It stores 3.2 gallons in a stainless steel tank and recovers 114 gallons per hour at a 40°F temperature rise, or 65 gallons per hour at a 70°F rise. Hatco builds the Mini-Compact for hot water sanitizing and point-of-use hot water, on standard 6" legs. Choose 240V 1-phase, 240V 3-phase or 480V 3-phase power when you order.
Have the electrician confirm the voltage, phase and circuit before the heater arrives: Hatco electric boosters are hard wired with no cord or plug.
At 11.4 kW the MC-11 heats 114 gallons per hour through a 40°F rise and 65 gallons per hour through a 70°F rise, for a 180°F final rinse.
The 3.2-gallon stainless steel tank is wrapped in fiberglass insulation, and the heater recovers fast for its size.
A low-water cut-off keeps the elements off when the tank is low, and a high-temperature limit switch adds a second safety.
It arrives pre-plumbed and pre-wired with an immersion thermostat, temperature/pressure relief valve, pressure reducing valve and two temperature/pressure gauges.
Size it by the gallons per hour your dishmachine rinse uses and your incoming water temperature. The MC-11 recovers 114 GPH at a 40°F rise (140°F in, 180°F out) and 65 GPH at a 70°F rise (110°F in). If your machine uses more, step up in kW.
Pick the voltage and phase you have on site: 240V 1-phase draws 47.5 A on a 60 A breaker; 240V 3-phase draws 27.5 A on a 40 A breaker; 480V 3-phase draws 13.7 A on a 20 A breaker. It is hard wired by a licensed electrician.
No. Mini-Compact heaters are not field convertible, so the phase must be specified when ordering.
Yes, if it is hard. Water over 3.0 grains of hardness per gallon must be treated and softened before it reaches the booster. Failure from liming or sediment is not covered by the warranty.
Hatco covers the booster tank for 1 year parts and labor plus 9 more years parts only. Other parts carry Hatco's standard 18-month limited warranty. Register the unit with Hatco within 90 days of factory shipment to qualify for added coverage.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | MC-11 |
| Series | Mini-Compact Electric Booster Water Heater |
| Shipping Weight | 48 lb. |
| Width | 11.72 Inches |
| Depth | 12.88 Inches |
| Height | 18.5 Inches |
| Dimension Notes | Height Includes 6 Inch Legs |
| Power Rating | 11.4 kW |
| Voltage | 240 or 480 Volts |
| Hertz | 60 Hz |
| Phase | 1 or 3 |
| Amp Draw and Breaker | 240V 1-Ph: 47.5 A, 60 A Breaker240V 3-Ph: 27.5 A, 40 A Breaker480V 3-Ph: 13.7 A, 20 A Breaker |
| Copper Wire Size | 240V 1-Ph: 6 AWG240V 3-Ph: 8 AWG480V 3-Ph: 12 AWG |
| Phase Conversion | Must Specify Phase, Not Field Convertible |
| Connection | Hard Wired, Breaker or Fused Disconnect by Electrical Contractor |
| Capacity | 3.2 Gallons |
| Recovery at 40°F Rise | 114 Gallons per Hour |
| Recovery at 70°F Rise | 65 Gallons per Hour |
| Output Temperature | 180°F Final Rinse |
| Water Connections | 3/4 Inch NPT Inlet and Outlet |
| Water Hardness | Soften Water Over 3.0 Grains per Gallon |
| Relief Valve Setting | 150 PSI, 210°F |
| Tank | Stainless Steel |
| Exterior | Stainless Steel Front PanelSilver-Gray Hammertone Powder-Coated BodyBlack Base |
| Insulation | Fiberglass |
| Control Type | Immersion ThermostatHigh-Temperature Limit SwitchLow-Water Cut-OffOn/Off Switch |
| Standard Equipment | Temperature/Pressure Relief ValvePressure Reducing ValveTwo Temperature/Pressure Gauges6 Inch Legs |
| Factory Options | Stainless Steel Body and Base, at Time of Purchase Only |
| Accessories | Brass Pressure Reducing Valve6 to 7 Inch Adjustable Stainless Steel LegsBlended Phosphate Injection System, Not for Potable WaterShock Absorber |
| Certifications | cULus, NSF |
| Country of Origin | Made in USA |
| Warranty | Tank 1 Year Parts and Labor Plus 9 Years Parts OnlyOther Parts 18 Months |
Certifications
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
