Hatco ORBIT100-132 Flav-R-Shield Full-Service Pass-Over Sneeze Guard, 132" W, 4 Bays, 18" Posts
A 132" wide full-service pass-over glass sneeze guard that bolts to the counter between your staff and guests.
The Hatco Flav-R-Shield ORBIT100-132 is a stationary pass-over sneeze guard for full-service buffet lines and serving stations. It spans 132" post center to post center in 4 bays on 18" high posts. The 3/8" tempered glass face panels rotate in 15 degree steps and have extra circular openings for height adjustment, and the 1" brushed stainless steel posts mount to stainless, stone or laminate counters.
Mark the flange locations from the 132" post center spacing before you drill.
Patented face panel turns in 15 degree increments to suit how your staff serve across the counter.
Extra circular openings in the face panel give more mounting positions for height.
3/8" tempered glass with 3/4" radius corners and flat polished edges.
Only 2.2" from the end of the flange to the edge of the panel, so it takes little counter space across 132".
1" SAE 304 brushed stainless steel posts, 18" high, in 4 bays.
The posts are 132" apart center to center and the unit is 134" wide outside the flanges. The posts are 18" high and the glass sits 2.2" from the end of the flange.
Each post sits in a 2" flange that screws to the counter. Hatco recommends 2" long #8 countersunk screws for most surfaces; requirements vary by surface and fasteners are not included.
No. 18" deep, 1/4" thick tempered glass end panels with hardware are an accessory, one or two, that can be added at any time.
The spec sheet shows the NSF Component and SGCC safety glazing marks.
As custom options Hatco offers 18" to 30" posts, face panel widths of 24" to 65-3/4" per bay, right, left or no end panel, above or below counter compression flanges and a light bar. This listing is the standard 18" post model.
Hatco lists a one-year parts-only warranty.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | ORBIT100-132 |
| Series | Flav-R-Shield ORBIT100 |
| Type | Full-Service Pass-Over Sneeze Guard |
| Number of Bays | 4 |
| Shipping Weight | 280 lb. |
| Packaging | May Ship in Multiple Boxes |
| Width | 132 Inches |
| Width Measured | Center of Post to Center of Post |
| Outside Flange Width | 134" |
| Inside Flange Width | 130" |
| Depth | 2.2 Inches |
| Depth Measured | End of Flange to Edge of Panel |
| Height | 18 Inches |
| Post Height | 18" Standard18" to 30" as a Custom Option |
| Face Panel | Patented 15 Degree Increment Rotating Face Panel with Extra Circular Openings for Height Adjustment |
| Posts | 1" Diameter SAE 304 Brushed Stainless Steel |
| Glass | 3/8" Thick Tempered Glass3/4" Radius CornersFlat Polished Edges |
| Flanges | 2" Flanges with Covers |
| Mounting Surfaces | Stainless SteelNatural and Engineered Solid StoneLaminate |
| Fasteners | #8 Countersunk Screws, 2" Long, Recommended for Most SurfacesNot Included |
| End Panels | 18" Deep, 1/4" Tempered Glass with HardwareOne or TwoSold Separately |
| Custom Configurations | Face Panel Widths 24" to 65-3/4" per BayEnd Panel Right Only, Left Only or No End PanelAbove or Below Counter Compression FlangesLight Bar |
| Certifications | NSF Component, SGCC |
| Made In | USA |
| Warranty | 1 Year Parts Only |
| Returns | Custom by Nature, Non-Returnable per Hatco |
Certifications
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
