Hatco ORBIT360-132 Flav-R-Shield Self-Service Sneeze Guard, 132" W, 4 Bays, 23" Posts
A 132" wide self-service glass sneeze guard with a rotating face panel that suits straight and radius counters.
The Hatco Flav-R-Shield ORBIT360-132 is a stationary self-service sneeze guard for buffet lines and serving stations. It spans 132" post center to post center in 4 bays of 33" each, on 23" high posts. The patented 3/8" tempered glass face panel rotates in 15 degree steps and sits 2" to 14" deep, and Hatco notes it is well suited to radius counters.
Mark the flange locations from the post center spacing: 132" total, 33" per bay.
Patented face panel turns in 15 degree increments; Hatco calls it perfect for radius counters.
The glass sits anywhere from 2" to 14" deep from the posts, set on adjustable Orbit brackets.
Twist-lock Orbit brackets slide on the 23" posts so the face panel can be set to the height you need.
3/8" tempered glass with 3/4" radius corners and flat polished edges.
1" SAE 304 brushed stainless steel posts in 4 bays.
The posts are 132" apart center to center and the unit is 134" wide outside the flanges. The posts are 23" high and the glass can sit 2" to 14" deep.
Each post sits in a 2" flange that screws to the counter. Hatco recommends 2" long #8 countersunk screws for most surfaces; requirements vary by surface and fasteners are not included.
No. 18" deep, 1/4" thick tempered glass end panels with hardware are an accessory, one or two, that can be added at any time.
The spec sheet shows the NSF Component and SGCC safety glazing marks. Hatco's installation guide says to seal the set screw heads with NSF-approved silicone and keep the bottom of end panels no more than 1-1/2" above the counter for NSF compliance.
Hatco offers an LED light bar as a factory-installed option on certain sizes, with a cord and plug or a battery pack, through its custom configurations. This listing is the standard model without a light bar.
Hatco lists a one-year parts-only warranty. Its installation guide notes that abrasive cleaners or cloths void the warranty.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | ORBIT360-132 |
| Series | Flav-R-Shield ORBIT360 |
| Type | Self-Service Sneeze Guard |
| Number of Bays | 4 |
| Width per Bay | 33" Post Center to Post Center |
| Shipping Weight | 295 lb. |
| Packaging | May Ship in Multiple Boxes |
| Width | 132 Inches |
| Width Measured | Center of Post to Center of Post |
| Outside Flange Width | 134" |
| Inside Flange Width | 130" |
| Depth | 2 to 14 Inches |
| Height | 23 Inches |
| Post Height | 23" |
| Face Panel | Patented 15 Degree Increment Rotating Face Panel with Extra Circular Openings for AdjustmentSuits Radius Counters |
| Posts | 1" Diameter SAE 304 Brushed Stainless Steel |
| Glass | 3/8" Thick Tempered Glass3/4" Radius CornersFlat Polished Edges |
| Flanges | 2" Flanges with Covers |
| Mounting Surfaces | Stainless SteelNatural and Engineered Solid StoneLaminate |
| Fasteners | #8 Countersunk Screws, 2" Long, Recommended for Most SurfacesNot Included |
| End Panels | 18" Deep, 1/4" Tempered Glass with HardwareOne or TwoSold Separately |
| Custom Configurations | Face Panel Widths 24" to 65-3/4" per BayEnd Panel Right Only, Left Only or No End PanelAbove or Below Counter Compression FlangesLight Bar |
| Certifications | NSF Component, SGCC |
| Made In | USA |
| Warranty | 1 Year Parts Only |
| Returns | Custom by Nature, Non-Returnable per Hatco |
Certifications
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
