Hatco UGA-24D Ultra-Glo Ceramic Dual Infrared Strip Heater, 24", 3" Spacer, Standard Watt, 1300-1350 W, 120/208/240V
Description
Two 24" ceramic heaters side by side with a 3" spacer, for a deeper heated holding area over a wide pass or buffet.
The Hatco UGA-24D is the 24" standard watt Ultra-Glo ceramic dual infrared strip heater, here with the 3" spacer between the two heating elements (standard). Side-by-side mounting gives a deeper holding area, and the ceramic heat source lets the unit mount higher for more working clearance. It comes in 120, 208 or 240V single phase, set when you order, and draws 1300-1350 watts in total depending on voltage. Hatco includes either an attached control box or a remote control enclosure with toggle switches and indicator lights.
Will it fit · Will it hook up
- Outside size
- 24" W x 15" D x 2-1/2" H with a remote control enclosure; 18.82" D with the attached control box
- Power
- Single phase, hardwired through a 3 ft. conduit whip: 120V 1300 W, 10.8 A; 208V 1350 W, 6.5 A; 240V 1300 W, 5.4 A
- Mounting height
- Hatco recommends 18" to 22" above the surface for standard watt Ultra-Glo dual units
- Clearances
- Non-combustible surroundings only: at least 1" below a shelf and 3" from a back wall
Check the depth over your pass: the 3" spacer makes this unit 15" deep without an attached control box.
Deeper holding area
Two ceramic heaters mounted side by side with a 3" spacer cover a 15" deep housing, for wider food holding areas.
Ceramic heat source
The ceramic elements let the unit mount higher than metal-element heaters, which gives the chef and server more working clearance.
Pyramidal heat pattern
Pre-focused heat concentrates at the edges of the holding area, where heat loss is greatest. Heavy-duty insulation minimizes heat loss.
Housing that will not sag
Continuous extruded aluminum housings eliminate sagging. The standard finish is clear anodized aluminum.
Control included
Hatco includes an attached control box or a remote control enclosure with toggle switches and indicator lights.
Delivery and setup
- Inspect the carton for damage before you sign, and note any damage on the delivery receipt. Approximate shipping weight is 20 lb.; add 2 to 8 lb. for a remote control enclosure.
- A licensed electrician should hardwire the unit at the voltage on its specification label, through the 3 ft. conduit whip, in line with local electrical codes.
- Mount it 18" to 22" above the surface in non-combustible surroundings, at least 1" below a shelf and 3" from a back wall.
- If you ordered a remote control enclosure, install it outside the heat zone or it will be damaged.
- Clean daily once it is off and cool: wipe metal surfaces with a damp, non-abrasive cloth, then dry.
Questions buyers ask
What power does it need?
It is single phase, in 120, 208 or 240V, chosen when you order: 120V 1300 W, 10.8 A; 208V 1350 W, 6.5 A; 240V 1300 W, 5.4 A. It is hardwired through a 3 ft. conduit whip; extended leads up to 20 ft. are factory options.
What does the spacer change?
The spacer sets the gap between the two heaters. With the 3" spacer the unit is 15" deep; with the 6" spacer it is 18" deep. We list the 6" spacer version separately.
Does it come with a switch?
Yes. Hatco includes either an attached control box or a remote control enclosure with toggle switches and indicator lights. A remote enclosure with electronic infinite control and relay is a factory option. Hatco lists the remote toggle enclosure as not available on 240V dual models.
How high should I mount it?
Hatco recommends 18" to 22" above the surface for standard watt Ultra-Glo dual heaters, at least 1" below a shelf and 3" from a back wall.
Can it go under a wood shelf?
No. Hatco says Ultra-Glo strip heaters must not be installed above or around combustible surfaces.
What is the warranty?
Hatco's limited warranty runs 18 months from shipment or product registration, whichever is later, and Hatco warrants all ceramic heating elements against burnout for one year. 24/7 parts and service assistance is available in the US and Canada.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | UGA-24D |
| Series | Ultra-Glo Ceramic Dual Infrared Strip Heater, Standard Watt, UGA(H)-XXD |
| Configuration | 3 Inch Spacer Between Heaters, Standard |
| Shipping Weight | 20 lb. |
| Shipping Weight Note | Add 2 to 8 lb. depending on size of remote control enclosure |
| Width | 24 Inches |
| Depth | 15 Inches |
| Height | 2.5 Inches |
| Depth with Attached Control Box | 18.82 Inches |
| Voltage | 120, 208 or 240 Volts |
| Wattage by Voltage | 120V: 1300 W208V: 1350 W240V: 1300 W |
| Amps by Voltage | 120V: 10.8 Amps208V: 6.5 Amps240V: 5.4 Amps |
| Phase | Single Phase |
| Circuits | 1 |
| Connection | Hardwired, 3 ft. Conduit Whip |
| Control | Attached Control Box or Remote Control Enclosure with Toggle Switches and Indicator Lights, Included |
| Housing | Extruded Aluminum, Clear Anodized Standard |
| Heating Element | Dual Ceramic Infrared |
| Mounting | Adjustable Angle Brackets |
| Recommended Mounting Height | 18 to 22 Inches Above Surface |
| Minimum Clearances | Non-Combustible Surroundings Only1 in. Below Shelf3 in. from Back Wall |
| Factory Options | Designer Colors or Gloss FinishesRemote Enclosure with Electronic Infinite ControlExtended Leads 1 to 20 ft.Non-Adjustable Dual Tubular Stands, 18 to 26 in. Clearance |
| Certifications | cULus, NSF |
| Certification Note | Hatco shows UL and NSF for all dual units and cULus for units up to 36 in. |
| Made In | USA |
| Warranty | 18 Months LimitedCeramic Elements 1 Year Against Burnout |
| Warranty Notes | 24/7 parts and service assistance in US and Canada |
Certifications
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
What Our Customers Say

