Hatco UGA-72 Ultra-Glo Ceramic Infrared Strip Heater, 72", Standard Watt, 1960-2000 W, 208/240V

Hatco UGA-72 Ultra-Glo Ceramic Infrared Strip Heater, 72", Standard Watt, 1960-2000 W, 208/240V

HatcoSKU: HAT-UGA-72

Price:
Regular price$941.05
  • Warranty · 18 Months Limited

Secure checkout

Apple Pay Diners ClubDiscoverGoogle Pay Mastercard Shop Pay Visa

Talk to an equipment specialist

Mon–Sat 8 AM–5 PM ET

Questions about size, power, delivery or a quote for several units?

Call

Will it fit · Will it plug in

Outside (W × D × H)72" × 6" × 2.5"
Power208 or 240V
Shipping weight25 lb.
ListedNSF

Highlights

  • 72" W x 6" D x 2-1/2" H Ultra-Glo ceramic strip heater, standard watt
  • 1960-2000 W depending on voltage; 208 or 240V single phase, set at order
  • Attached control box or remote enclosure with toggle switch and indicator light included
  • Ceramic heat source mounts 14" to 18" above the food for more working clearance
  • Pre-focused pyramidal heat pattern; extruded aluminum housing that will not sag
  • NSF; made in USA

Specifications

ManufacturerHatco
Model NumberUGA-72
SeriesUltra-Glo Ceramic Infrared Strip Heater, Standard Watt, UGA(H)
Shipping Weight25 lb.
Shipping Weight NoteAdd 2 to 8 lb. depending on size of remote control enclosure
Width72"
Depth6"
Height2.5"
Depth with Attached Control Box9.88"
Voltage208 or 240V
Wattage by Voltage208V: 1960 W, 240V: 2000 W
Amps by Voltage208V: 9.4 A, 240V: 8.3 A
PhaseSingle Phase
ConnectionHardwired, 42" Leads in 36" Flexible Metal Conduit
ControlAttached Control Box or Remote Control Enclosure with Toggle Switch and Indicator Light, Included
HousingExtruded Aluminum, Clear Anodized Standard
Heating ElementCeramic Infrared
MountingAdjustable Angle Brackets, 3 Mounting Heights
Recommended Mounting Height14 to 18" Above a Non-Combustible Surface
Minimum ClearancesNon-Combustible Surroundings Only, 1 in. Below Shelf, 3 in. from Back Wall
Factory OptionsRemote Enclosure with Electronic Infinite Control, Extended Leads 1 to 20 ft., Non-Adjustable Tubular Stands, 14 to 22 in. Clearance
CertificationsNSF
Certification NoteHatco shows cULus for 120, 120/208 and 120/240 volt models only
Made InUSA
Warranty18 Months Limited
Warranty Notes24/7 parts and service assistance in US and Canada

Resources & Documents

Specs

Manufacturer Hatco
Model Number UGA-72
Series Ultra-Glo Ceramic Infrared Strip Heater, Standard Watt, UGA(H)
Shipping Weight 25 lb.
Shipping Weight Note Add 2 to 8 lb. depending on size of remote control enclosure
Width 72 Inches
Depth 6 Inches
Height 2.5 Inches
Depth with Attached Control Box 9.88 Inches
Voltage 208 or 240 Volts
Wattage by Voltage 208V: 1960 W240V: 2000 W
Amps by Voltage 208V: 9.4 Amps240V: 8.3 Amps
Phase Single Phase
Connection Hardwired, 42 Inch Leads in 36 Inch Flexible Metal Conduit
Control Attached Control Box or Remote Control Enclosure with Toggle Switch and Indicator Light, Included
Housing Extruded Aluminum, Clear Anodized Standard
Heating Element Ceramic Infrared
Mounting Adjustable Angle Brackets, 3 Mounting Heights
Recommended Mounting Height 14 to 18 Inches Above a Non-Combustible Surface
Minimum Clearances Non-Combustible Surroundings Only1 in. Below Shelf3 in. from Back Wall
Factory Options Remote Enclosure with Electronic Infinite ControlExtended Leads 1 to 20 ft.Non-Adjustable Tubular Stands, 14 to 22 in. Clearance
Certifications NSF
Certification Note Hatco shows cULus for 120, 120/208 and 120/240 volt models only
Made In USA
Warranty 18 Months Limited
Warranty Notes 24/7 parts and service assistance in US and Canada

Certifications

NSF
Call

Description

A 72" ceramic overhead warmer that mounts higher than a metal-element strip heater, so staff get more working room over the pass.

Hatco Ultra-Glo ceramic infrared strip heater with attached control box and dark housing, underside view (representative photo for the UGA-72)

The Hatco UGA-72 is the 72" standard watt Ultra-Glo ceramic infrared strip heater. A ceramic heat source lets it mount higher for better working clearance, and a pre-focused pyramidal heat pattern puts more heat at the edges of the holding area, where heat loss is greatest. It comes in 208 or 240V single phase, set when you order, and draws 1960-2000 watts depending on voltage. Hatco includes either an attached control box or a remote control enclosure with a toggle switch and indicator light, and adjustable angle brackets for mounting. This size is not offered at 120V.

Will it fit · Will it hook up

Outside size
72" W x 6" D x 2-1/2" H with a remote control enclosure; 9.88" D with the attached control box
Power
Single phase, hardwired through 42" leads in a 36" flexible metal conduit: 208V 1960 W, 9.4 A; 240V 2000 W, 8.3 A
Mounting height
Hatco recommends 14" to 18" above a non-combustible surface for standard watt Ultra-Glo units
Clearances
Non-combustible surroundings only: at least 1" below a shelf and 3" from a back wall

Choose attached or remote control when you order. A remote control enclosure must be mounted outside the heat zone.

Ceramic heat source

The ceramic element lets the heater mount higher than metal-element units, which gives the chef and server more working clearance.

Pyramidal heat pattern

Pre-focused heat concentrates at the edges of the holding area, where heat loss is greatest. A dual aluminized steel reflector focuses heat toward the food.

Housing that will not sag

A continuous extruded aluminum housing with heavy-duty insulation keeps the exterior cooler. A wire guard sits under the heating element.

Control included

Hatco includes an attached control box or a remote control enclosure with toggle switch and indicator light. A remote box with electronic infinite control is a factory option.

Adjustable brackets

The standard angle brackets allow 3 mounting heights and a conduit connection at the end of the unit.

Delivery and setup

  • Inspect the carton for damage before you sign, and note any damage on the delivery receipt. Approximate shipping weight is 25 lb.; add 2 to 8 lb. for a remote control enclosure.
  • A licensed electrician should hardwire the unit at the voltage on its specification label, through the 3 ft. conduit whip, in line with local electrical codes.
  • Mount it 14" to 18" above the food in non-combustible surroundings, at least 1" below a shelf and 3" from a back wall.
  • If you ordered a remote control enclosure, install it outside the heat zone or it will be damaged.
  • Clean daily once it is off and cool: wipe metal surfaces with a damp, non-abrasive cloth, then dry.

Questions buyers ask

What power does it need?

It is single phase, in 208 or 240V, chosen when you order: 208V 1960 W, 9.4 A; 240V 2000 W, 8.3 A. It is hardwired through 42" leads in a 36" flexible metal conduit; extended leads up to 20 ft. are factory options.

Does it come with a switch?

Yes. Hatco includes either an attached control box or a remote control enclosure with a toggle switch and indicator light. A remote enclosure with toggle, electronic infinite control, relay and indicator light can be ordered in place of the attached box.

How high should I mount it?

Hatco recommends 14" to 18" above a non-combustible surface for standard watt Ultra-Glo heaters, at least 1" below a shelf and 3" from a back wall.

Can it go under a wood shelf?

No. Hatco says Ultra-Glo strip heaters must not be installed above or around combustible surfaces.

Does it come in colors?

Clear anodized aluminum is standard. Hatco's price list offers its Designer colors and Gloss finishes on 18" to 36" aluminum models.

What is the warranty?

Hatco's limited warranty runs 18 months from shipment or product registration, whichever is later, with 24/7 parts and service assistance in the US and Canada.

1960-2000 W Std. WattCeramic element, pyramidal heat.
72" x 6" x 2-1/2"Extruded aluminum, will not sag.
208/240VSingle phase, hardwired, set at order.
NSFMade in USA.

Specs

Manufacturer Hatco
Model Number UGA-72
Series Ultra-Glo Ceramic Infrared Strip Heater, Standard Watt, UGA(H)
Shipping Weight 25 lb.
Shipping Weight Note Add 2 to 8 lb. depending on size of remote control enclosure
Width 72 Inches
Depth 6 Inches
Height 2.5 Inches
Depth with Attached Control Box 9.88 Inches
Voltage 208 or 240 Volts
Wattage by Voltage 208V: 1960 W240V: 2000 W
Amps by Voltage 208V: 9.4 Amps240V: 8.3 Amps
Phase Single Phase
Connection Hardwired, 42 Inch Leads in 36 Inch Flexible Metal Conduit
Control Attached Control Box or Remote Control Enclosure with Toggle Switch and Indicator Light, Included
Housing Extruded Aluminum, Clear Anodized Standard
Heating Element Ceramic Infrared
Mounting Adjustable Angle Brackets, 3 Mounting Heights
Recommended Mounting Height 14 to 18 Inches Above a Non-Combustible Surface
Minimum Clearances Non-Combustible Surroundings Only1 in. Below Shelf3 in. from Back Wall
Factory Options Remote Enclosure with Electronic Infinite ControlExtended Leads 1 to 20 ft.Non-Adjustable Tubular Stands, 14 to 22 in. Clearance
Certifications NSF
Certification Note Hatco shows cULus for 120, 120/208 and 120/240 volt models only
Made In USA
Warranty 18 Months Limited
Warranty Notes 24/7 parts and service assistance in US and Canada

Certifications

NSF

Payment & Security

Apple Pay Diners Club Discover Google Pay Mastercard Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

What Our Customers Say

Related Products

Recently viewed