Hatco UGAH-24 Ultra-Glo Ceramic Infrared Strip Heater, 24", High Watt, 750 W, 120/208/240V
Description
A 24" ceramic overhead warmer that mounts higher than a metal-element strip heater, so staff get more working room over the pass.
The Hatco UGAH-24 is the 24" high watt Ultra-Glo ceramic infrared strip heater. A ceramic heat source lets it mount higher for better working clearance, and a pre-focused pyramidal heat pattern puts more heat at the edges of the holding area, where heat loss is greatest. It comes in 120, 208 or 240V single phase, set when you order, and draws 750 watts depending on voltage. Hatco includes either an attached control box or a remote control enclosure with a toggle switch and indicator light, and adjustable angle brackets for mounting.
Will it fit · Will it hook up
- Outside size
- 24" W x 6" D x 2-1/2" H with a remote control enclosure; 9.88" D with the attached control box
- Power
- Single phase, hardwired through 42" leads in a 36" flexible metal conduit: 120V 750 W, 6.3 A; 208V 750 W, 3.6 A; 240V 750 W, 3.1 A
- Mounting height
- Hatco recommends 16" to 22" above a non-combustible surface for high watt Ultra-Glo units
- Clearances
- Non-combustible surroundings only: at least 1" below a shelf and 3" from a back wall
Choose attached or remote control when you order. A remote control enclosure must be mounted outside the heat zone.
Ceramic heat source
The ceramic element lets the heater mount higher than metal-element units, which gives the chef and server more working clearance.
Pyramidal heat pattern
Pre-focused heat concentrates at the edges of the holding area, where heat loss is greatest. A dual aluminized steel reflector focuses heat toward the food.
Housing that will not sag
A continuous extruded aluminum housing with heavy-duty insulation keeps the exterior cooler. A wire guard sits under the heating element.
Control included
Hatco includes an attached control box or a remote control enclosure with toggle switch and indicator light. A remote box with electronic infinite control is a factory option.
Adjustable brackets
The standard angle brackets allow 3 mounting heights and a conduit connection at the end of the unit.
Delivery and setup
- Inspect the carton for damage before you sign, and note any damage on the delivery receipt. Approximate shipping weight is 10 lb.; add 2 to 8 lb. for a remote control enclosure.
- A licensed electrician should hardwire the unit at the voltage on its specification label, through the 3 ft. conduit whip, in line with local electrical codes.
- Mount it 16" to 22" above the food in non-combustible surroundings, at least 1" below a shelf and 3" from a back wall.
- If you ordered a remote control enclosure, install it outside the heat zone or it will be damaged.
- Clean daily once it is off and cool: wipe metal surfaces with a damp, non-abrasive cloth, then dry.
Questions buyers ask
What power does it need?
It is single phase, in 120, 208 or 240V, chosen when you order: 120V 750 W, 6.3 A; 208V 750 W, 3.6 A; 240V 750 W, 3.1 A. It is hardwired through 42" leads in a 36" flexible metal conduit; extended leads up to 20 ft. are factory options.
Does it come with a switch?
Yes. Hatco includes either an attached control box or a remote control enclosure with a toggle switch and indicator light. A remote enclosure with toggle, electronic infinite control, relay and indicator light can be ordered in place of the attached box.
How high should I mount it?
Hatco recommends 16" to 22" above a non-combustible surface for high watt Ultra-Glo heaters, at least 1" below a shelf and 3" from a back wall.
Can it go under a wood shelf?
No. Hatco says Ultra-Glo strip heaters must not be installed above or around combustible surfaces.
Does it come in colors?
Clear anodized aluminum is standard. For 18" to 36" units Hatco offers Designer colors and Gloss finishes, such as Warm Red, Black, Gleaming Gold or Brilliant Blue, at time of purchase. Non-standard colors are non-returnable.
What is the warranty?
Hatco's limited warranty runs 18 months from shipment or product registration, whichever is later, with 24/7 parts and service assistance in the US and Canada.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | UGAH-24 |
| Series | Ultra-Glo Ceramic Infrared Strip Heater, High Watt, UGA(H) |
| Shipping Weight | 10 lb. |
| Shipping Weight Note | Add 2 to 8 lb. depending on size of remote control enclosure |
| Width | 24 Inches |
| Depth | 6 Inches |
| Height | 2.5 Inches |
| Depth with Attached Control Box | 9.88 Inches |
| Voltage | 120, 208 or 240 Volts |
| Wattage by Voltage | 120V: 750 W208V: 750 W240V: 750 W |
| Amps by Voltage | 120V: 6.3 Amps208V: 3.6 Amps240V: 3.1 Amps |
| Phase | Single Phase |
| Connection | Hardwired, 42 Inch Leads in 36 Inch Flexible Metal Conduit |
| Control | Attached Control Box or Remote Control Enclosure with Toggle Switch and Indicator Light, Included |
| Housing | Extruded Aluminum, Clear Anodized Standard |
| Heating Element | Ceramic Infrared |
| Mounting | Adjustable Angle Brackets, 3 Mounting Heights |
| Recommended Mounting Height | 16 to 22 Inches Above a Non-Combustible Surface |
| Minimum Clearances | Non-Combustible Surroundings Only1 in. Below Shelf3 in. from Back Wall |
| Factory Options | Designer Colors or Gloss FinishesRemote Enclosure with Electronic Infinite ControlExtended Leads 1 to 20 ft.Non-Adjustable Tubular Stands, 14 to 22 in. Clearance |
| Certifications | cULus, NSF |
| Certification Note | Hatco shows cULus for 120, 120/208 and 120/240 volt models only |
| Made In | USA |
| Warranty | 18 Months Limited |
| Warranty Notes | 24/7 parts and service assistance in US and Canada |
Certifications
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
What Our Customers Say

