Hatco UGAH-66D6 Ultra-Glo Ceramic Dual Infrared Strip Heater, 6" Spacer, 66" W x 18" D, 5,200-5,400 W, High Watt

Hatco UGAH-66D6 Ultra-Glo Ceramic Dual Infrared Strip Heater, 6" Spacer, 66" W x 18" D, 5,200-5,400 W, High Watt

HatcoSKU: HAT-UGAH-66D6

Price:
Regular price$2,058.10
  • Warranty · 18 Months Limited

Secure checkout

Apple Pay Diners ClubDiscoverGoogle Pay Mastercard Shop Pay Visa

Talk to an equipment specialist

Mon–Sat 8 AM–5 PM ET

Questions about size, power, delivery or a quote for several units?

Call

Will it fit · Will it plug in

Outside (W × D × H)66" × 18" × 2.5"
Power208 or 240V · 5,400 W at 208V, 5,200 W at 240V · 13.0 A per circuit at 208V, 10.8 A per circuit at 240V · Hardwired
Shipping weight50 lb.
ListedUL, NSF

Highlights

  • 66" wide Ultra-Glo high watt ceramic dual infrared strip heater
  • 5,200 to 5,400 W; 208 or 240V single phase, set at order; hardwired
  • 18" deep with 6" spacer between the two elements; 21.82" with attached control box
  • Toggle switch and indicator light in attached control box or remote enclosure, chosen at order
  • Mounts 22" to 26" above the counter; adjustable angle brackets included
  • UL, NSF; made in the USA

Specifications

ManufacturerHatco
Model NumberUGAH-66D
Listing CodeUGAH-66D6 = UGAH-66D with 6" spacer
SeriesUltra-Glo
TypeCeramic Dual Infrared Strip Heater
Wattage ClassHigh Watt
Shipping Weight50 lb.
Shipping Weight NoteAdd 2 to 8 lb. when a remote control enclosure is ordered
Width66"
Depth18"
Height2.5"
Depth With Attached Control Box21.82"
Spacer6", Optional, adds 3" to depth
Voltage208 or 240V
PhaseSingle
Wattage5,400 W at 208V, 5,200 W at 240V
Amps13.0 A per circuit at 208V, 10.8 A per circuit at 240V
Plug TypeHardwired
Leads42" Leads Through 36" Flexible Metal Conduit, Extended Leads 1' to 20' Optional
Circuits2 Internal Circuits, Each Circuit May Require a Separate Breaker
Control TypeToggle Switch and Indicator Light
Control LocationAttached Control Box or Remote Control Enclosure RMB, Chosen at Order
Switch RatingsToggle Switch Max. 15 A per Circuit, Infinite Control Max. 12.2 A
HousingContinuous Extruded Aluminum, Clear Anodized Standard
Heating ElementCeramic Infrared, 2 Elements
Element GuardProtective Wire Guards
Mounting Height22" to 26" Above a Non-Combustible Counter
Clearances1" Below Shelf, 3" From Back Wall, Non-Combustible Surroundings Only
Mounting HardwareAdjustable Angle Brackets Included
Pass-Through Depth20" to 24" Recommended for Dual Units
Factory OptionsDesigner Colors and Gloss Finishes for Housing, Stands and RMB, Non-Adjustable Tubular Stands 18" to 26", Extended Leads, RMB With Toggle, RMB With Electronic Infinite Control
CertificationsUL, NSF
Certification NotecULus applies to dual units up to 36" wide; UL and NSF to all dual units
Made InUSA
Warranty18 Months Limited
Warranty DetailCeramic Elements Warranted Against Burnout for 1 Year, Coated Bulbs Not Covered, Register Within 90 Days

Resources & Documents

Specs

Manufacturer Hatco
Model Number UGAH-66D
Listing Code UGAH-66D6 = UGAH-66D with 6" spacer
Series Ultra-Glo
Type Ceramic Dual Infrared Strip Heater
Wattage Class High Watt
Shipping Weight 50 lb.
Shipping Weight Note Add 2 to 8 lb. when a remote control enclosure is ordered
Width 66 Inches
Depth 18 Inches
Height 2.5 Inches
Depth With Attached Control Box 21.82 Inches
Spacer 6 InchesOptional, adds 3" to depth
Voltage 208 or 240 Volts
Phase Single
Wattage 5,400 W at 208V5,200 W at 240V
Amps 13.0 A per circuit at 208V10.8 A per circuit at 240V
Plug Type Hardwired
Leads 42" Leads Through 36" Flexible Metal ConduitExtended Leads 1' to 20' Optional
Circuits 2 Internal CircuitsEach Circuit May Require a Separate Breaker
Control Type Toggle Switch and Indicator Light
Control Location Attached Control Box or Remote Control Enclosure RMB, Chosen at Order
Switch Ratings Toggle Switch Max. 15 A per CircuitInfinite Control Max. 12.2 A
Housing Continuous Extruded Aluminum, Clear Anodized Standard
Heating Element Ceramic Infrared, 2 Elements
Element Guard Protective Wire Guards
Mounting Height 22" to 26" Above a Non-Combustible Counter
Clearances 1" Below Shelf3" From Back WallNon-Combustible Surroundings Only
Mounting Hardware Adjustable Angle Brackets Included
Pass-Through Depth 20" to 24" Recommended for Dual Units
Factory Options Designer Colors and Gloss Finishes for Housing, Stands and RMBNon-Adjustable Tubular Stands 18" to 26"Extended LeadsRMB With ToggleRMB With Electronic Infinite Control
Certifications UL, NSF
Certification Note cULus applies to dual units up to 36" wide; UL and NSF to all dual units
Made In USA
Warranty 18 Months Limited
Warranty Detail Ceramic Elements Warranted Against Burnout for 1 YearCoated Bulbs Not CoveredRegister Within 90 Days

Certifications

UL
NSF
Call

Description

Two 66" ceramic infrared warmers side by side, for a 20" to 24" deep pass-through or holding shelf that needs strong, even top heat.

Hatco UGAH-66D6 Ultra-Glo ceramic strip heater, family photo of a short single unit showing the ceramic element and wire guard

The Hatco UGAH-66D6 is an Ultra-Glo high watt ceramic dual infrared strip heater. It joins two 66" heating elements with a 6" spacer for an 18" deep housing (UGAH-66D with the 6" spacer). The ceramic element lets you mount it higher, 22" to 26" above the counter, for more working room. It is rated 5,200 to 5,400 W and built for 208 or 240V single phase, chosen when you order, and it ships with a toggle switch and indicator light in an attached control box or a remote control enclosure.

Will it fit · Will it hook up

Outside size
66" W x 18" D x 2-1/2" H housing with remote control enclosure; 21.82" D with the attached control box
Power
208 or 240V single phase, set at order; hardwired; 13.0 A per circuit at 208V; 10.8 A per circuit at 240V; two circuits, each may need its own breaker
Controls
Toggle switch and indicator light in an attached control box or a remote control enclosure (RMB), chosen at order
Mounting height
22" to 26" above a non-combustible counter (high watt dual unit)
Clearance
At least 1" below a shelf and 3" from the back wall; non-combustible surroundings only
Wiring
42" leads through a 36" flexible metal conduit whip; longer leads up to 20' optional

Hatco recommends a dual unit for 20" to 24" deep pass-through areas.

Ceramic heat source

The ceramic element lets the heater hang 22" to 26" above the food, so cooks and servers get more working clearance.

Deeper holding area

Two 66" elements mounted side by side with a 6" spacer cover a 18" deep heat zone.

Pre-focused heat

Specially shaped reflectors concentrate heat at the edges of the holding area, where heat loss is greatest, so food does not overcook in the middle.

No-sag housing

A continuous extruded aluminum housing with heavy-duty insulation will not sag and keeps the outside cooler.

Brackets included

Adjustable angle brackets set a 1", 1-1/2" or 2" gap under a shelf; tubular stands are factory options.

Delivery and setup

  • Inspect the carton for damage before you sign, and note any damage on the delivery receipt.
  • Approximate shipping weight is 50 lb; add 2 to 8 lb when a remote control enclosure is ordered.
  • Have a qualified electrician hardwire the unit to local code. Use supply wire rated for 194°F (90°C): No. 14 AWG copper up to 15 A, No. 12 AWG for 15 to 20 A.
  • This unit has two internal circuits; each circuit may require a separate circuit breaker.
  • Mount any remote control enclosure in a cool, dry spot outside the heat zone, never on, under or above the heater.
  • On first start the factory oils may smoke for up to 30 minutes; run it empty until the smoke stops. Allow 15 to 20 minutes to reach operating temperature.

Questions buyers ask

What power does it need?

Choose 208 or 240V single phase when you order. It is rated 5,400 W at 208V, 5,200 W at 240V and draws 13.0 A per circuit at 208V; 10.8 A per circuit at 240V. It is hardwired, with no cord and plug.

Does it come with an on/off switch?

Yes. It ships with a toggle switch and indicator light, either in an attached control box or in a remote control enclosure (RMB), chosen at order. An RMB with an electronic infinite control is optional; infinite controls are not offered in the attached box. Hatco's dual sheet notes the remote toggle box is not offered on 240V models.

How high should I mount it?

Hatco lists 22" to 26" above a non-combustible counter for this high watt dual unit. Keep it at least 1" below a shelf and 3" from the back wall, in non-combustible surroundings only.

What does the D6 in the code mean?

It is the spacer between the two heating elements. Hatco builds the dual model with a 3" spacer (standard, 15" deep) or a 6" spacer (18" deep). This listing has the 6" spacer.

Can I get it in a color?

Yes, at the time of purchase only. Clear anodized aluminum is standard; the housing, stands and remote box can be ordered in Warm Red, Black, Gray Granite, White Granite, Navy Blue, Hunter Green and Antique Copper Designer colors, or Radiant Red, Glossy Gray, Bold Black, Gleaming Gold and Brilliant Blue gloss finishes. Non-standard colors are non-returnable. Ask us for a quote.

What warranty does it have?

Hatco's limited warranty runs 18 months from shipment or registration, whichever is later; the dual sheet states ceramic heating elements are warranted against burnout for one year. Coated light bulbs are not covered. Register within 90 days of shipment.

5,200-5,400 WHigh watt ceramic infrared.
66" x 18"6" spacer, two elements.
208 or 240VSet at order; hardwired.
UL, NSFMade in the USA.

Specs

Manufacturer Hatco
Model Number UGAH-66D
Listing Code UGAH-66D6 = UGAH-66D with 6" spacer
Series Ultra-Glo
Type Ceramic Dual Infrared Strip Heater
Wattage Class High Watt
Shipping Weight 50 lb.
Shipping Weight Note Add 2 to 8 lb. when a remote control enclosure is ordered
Width 66 Inches
Depth 18 Inches
Height 2.5 Inches
Depth With Attached Control Box 21.82 Inches
Spacer 6 InchesOptional, adds 3" to depth
Voltage 208 or 240 Volts
Phase Single
Wattage 5,400 W at 208V5,200 W at 240V
Amps 13.0 A per circuit at 208V10.8 A per circuit at 240V
Plug Type Hardwired
Leads 42" Leads Through 36" Flexible Metal ConduitExtended Leads 1' to 20' Optional
Circuits 2 Internal CircuitsEach Circuit May Require a Separate Breaker
Control Type Toggle Switch and Indicator Light
Control Location Attached Control Box or Remote Control Enclosure RMB, Chosen at Order
Switch Ratings Toggle Switch Max. 15 A per CircuitInfinite Control Max. 12.2 A
Housing Continuous Extruded Aluminum, Clear Anodized Standard
Heating Element Ceramic Infrared, 2 Elements
Element Guard Protective Wire Guards
Mounting Height 22" to 26" Above a Non-Combustible Counter
Clearances 1" Below Shelf3" From Back WallNon-Combustible Surroundings Only
Mounting Hardware Adjustable Angle Brackets Included
Pass-Through Depth 20" to 24" Recommended for Dual Units
Factory Options Designer Colors and Gloss Finishes for Housing, Stands and RMBNon-Adjustable Tubular Stands 18" to 26"Extended LeadsRMB With ToggleRMB With Electronic Infinite Control
Certifications UL, NSF
Certification Note cULus applies to dual units up to 36" wide; UL and NSF to all dual units
Made In USA
Warranty 18 Months Limited
Warranty Detail Ceramic Elements Warranted Against Burnout for 1 YearCoated Bulbs Not CoveredRegister Within 90 Days

Certifications

UL
NSF

Payment & Security

Apple Pay Diners Club Discover Google Pay Mastercard Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

What Our Customers Say

Related Products

Recently viewed