Hatco UGAL-72 Ultra-Glo Ceramic Infrared Strip Heater with Lights, 72" W, 2,320 or 2,360 W, 120/208V or 120/240V
Description
A 72" ceramic infrared strip heater with display lights that keeps a long pass-through hot from higher above the food.
The Hatco UGAL-72 is a 72" Ultra-Glo ceramic infrared strip heater with lights. A ceramic heating element in an extruded aluminum housing lets you mount it higher than a standard strip heater, so cooks and servers get more working room. Its pre-focused heat pattern covers the whole holding area, and 6 shatter-resistant incandescent lights show off the food. Voltage is set when you order: 120/208V (2,320 W) or 120/240V (2,360 W), single phase; the lights run on 120V and the heat on 208V or 240V.
Will it fit · Will it hook up
- Outside size
- 72" W x 9" D x 2.5" H with a remote control enclosure; 12-7/8" D with the attached control box
- Power
- 120/208V (2,320 W, 12.4 A) or 120/240V (2,360 W, 11.3 A), single phase; hardwired through a 3 ft. conduit whip
- Mounting
- Standard watt: 14" to 18" above the food. At least 1" below a shelf and 3" from a back wall
- Pass-through
- A single unit suits a 12" to 16" deep pass-through; Hatco recommends a dual unit for 20" to 24"
Install only in non-combustible surroundings, and keep any remote control box outside the heat zone.
Ceramic heat source
The ceramic element lets the unit hang higher than a standard strip heater, for more working clearance under it.
Pre-focused heat
The heat pattern concentrates heat at the edges, where heat loss is greatest, so food at the sides holds as well as food in the middle.
Sag-free aluminum housing
The 72" continuous extruded aluminum housing does not sag. Clear anodized aluminum is standard.
Display lights
6 coated, shatter-resistant incandescent bulbs light the food and guard against bulb breakage.
Simple controls
Toggle switch and indicator light come in an attached control box or a remote control enclosure.
Delivery and setup
- Inspect the crate for damage before you sign, and note any damage on the delivery receipt. Approximate shipping weight is 32 lb., plus 2 to 8 lb. if a remote control enclosure is ordered.
- A qualified electrician must hardwire the unit; it comes with leads in a 3 ft. flexible conduit whip and adjustable angle brackets for mounting.
- Mount it at least 1" below a shelf and 3" from the back wall, in non-combustible surroundings only, and keep any remote control box out of the heat zone.
- Let it run without food on first start-up: manufacturing oils may smoke for up to 30 minutes. It takes 15 to 20 minutes to reach operating temperature.
- Clean daily once cool: wipe with a damp, non-abrasive cloth and dry it. Do not use jet spray or steam on the unit.
Questions buyers ask
What voltage should I order?
UGAL-72 is built for 120/208V or 120/240V, single phase; pick the one that matches your building when you order. It draws 12.4 A at 120/208V and 11.3 A at 120/240V. A 120V-only version is not offered in this width.
How high do I mount it?
Hatco recommends 14" to 18" above the food for standard watt single units like this one.
What is included?
Adjustable angle brackets, leads in a 3 ft. conduit whip, and a toggle switch with indicator light in an attached control box or remote control enclosure.
Can I get a color?
Yes, at the time of purchase: Designer colors (Warm Red, Black, Gray Granite, White Granite, Navy Blue, Hunter Green, Antique Copper) and Gloss finishes (Glossy Gray, Bold Black, Gleaming Gold, Brilliant Blue, Radiant Red). Clear anodized aluminum is standard. Non-standard colors are non-returnable.
What warranty does it have?
Hatco's limited warranty runs 18 months from shipment or product registration, whichever is later. Light bulbs are not covered.
What certifications does it have?
The spec sheet shows cULus (for 120, 120/208 and 120/240 volt models) and NSF marks, and a Made in USA mark.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | UGAL-72 |
| Series | Ultra-Glo Ceramic Infrared Strip Heater with Lights |
| Shipping Weight | 32 lb. |
| Shipping Weight Note | Add 2 to 8 lb. for a remote control enclosure |
| Width | 72 Inches |
| Depth | 9 Inches |
| Height | 2.5 Inches |
| Depth with Attached Control Box | 12-7/8 Inches |
| Voltage | 120/208 or 120/240 Volts |
| Phase | Single Phase |
| Wattage | 120/208V: 2,320 Watts120/240V: 2,360 Watts |
| Amps | 120/208V: 12.4 A120/240V: 11.3 A |
| Circuits | 120V Light Circuit and 208V or 240V Heat Circuit |
| Connection | Hardwired, Leads in 3 ft. Flexible Conduit Whip |
| Element | Ceramic Infrared Element, Standard Watt |
| Heat Pattern | Pre-Focused |
| Lights | 6 Shatter-Resistant Coated Incandescent Bulbs |
| Controls | Toggle Switch and Indicator Light in Attached Control Box or Remote Control Enclosure |
| Housing | Continuous Extruded Aluminum, Clear Anodized |
| Mounting Height | 14 to 18 Inches |
| Clearances | Non-Combustible Surroundings Only1 Inch Below Shelf3 Inches from Back Wall |
| Factory Options | Designer Color or Gloss Housing60 W Halogen Display BulbExtra LampsNon-Adjustable Tubular Stands 14 to 22 InchesExtended Leads to 20 ft.Remote Control Enclosure with Toggle or Electronic Infinite Control |
| Accessories | Chef LED Bulbs 3000K or 4000K |
| Certifications | cULus, NSF |
| Country of Origin | Made in USA |
| Warranty | 18 Months Limited |
| Warranty Notes | From shipment or registration, whichever is laterBulbs not covered24/7 parts and service assistance in US and Canada |
Certifications
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
What Our Customers Say

