Hatco UGFFBL-120-T-QS Ultra-Glo Portable French Fry Warmer, Ceramic Element, Heated Base, 2 Lights, 1120W 120V, Quick-Ship Stock Model
Description
A plug-in fry station warmer that holds fries and fried foods hot with ceramic heat from above, a heated base below and two display lights.
The Hatco UGFFBL is an Ultra-Glo portable foodwarmer for fry stations, drive-through windows, pickup counters and serving points. Its ceramic heating element gives more distance between the heat source and the holding pan, which makes it easier to reach the food while it stays at serving temperature. A heated base with a thermostat preset at the factory adds heat from below. It comes pre-wired with a 6 ft. cord and NEMA 5-15P plug for a standard 120V outlet and draws 1120 watts. This listing is the Hatco Quick-Ship stock version: 120V with a built-in toggle switch (Hatco Quick-Ship code FFBCL18120T).
Will it fit · Will it hook up
- Outside size
- 12.77" W x 22.46" D x 22" H; 9" wide element housing
- Power
- 120V, 60 Hz, single phase, 1120 W, 9.3 A; 6 ft. cord with NEMA 5-15P plug
- Cord location
- Back, lower middle
- Placement
- Indoors on a level counter, at least 2" from combustible walls and materials; room at least 70°F
Plan an outlet within reach of the 6 ft. cord at the back of the unit.
Ceramic top heat
The ceramic element gives more distance between the heat source and the holding pan, and the compact housing leaves room to scoop and bag.
Toggle switch
A built-in ON/OFF toggle switch runs the unit. Allow 15 to 20 minutes to reach operating temperature with empty pans in place.
Heated base
The base has a preset automatic thermostat to keep holding temperature steady from below. Thermostat changes go through the factory.
Display lights
Two incandescent display lights with a protective coating light the food; the 9" housing is wider than the 6" unlit version. Halogen or Chef LED bulbs are options.
Portable aluminum build
An aluminum housing at 34 lb. shipping weight plugs in wherever a 120V outlet is close.
Delivery and setup
- Inspect the carton for damage before you sign, and note any damage on the delivery receipt.
- Keep the unit upright in transport, and do not lay it on the side with the control panel.
- The unit arrives pre-assembled. Set it upright, remove the packing and drop the chrome pan rail onto the base.
- Manufacturing oils may smoke for up to 30 minutes at first startup. Run it without food until the smoke clears.
- Plug it into a properly grounded 120V receptacle that matches the NEMA 5-15P plug.
Questions buyers ask
What outlet does it need?
A grounded 120V, 60 Hz outlet for the NEMA 5-15P plug on the 6 ft. cord. It draws 1120 watts and 9.3 amps.
How much counter space does it take?
The unit is 12.77" wide, 22.46" deep and 22" high. Keep it at least 2" from combustible walls.
Can I adjust the temperature?
The heated base uses an internal thermostat preset at the factory. Hatco asks you to consult the factory if an adjustment is needed. The infinite control option is not offered on Ultra-Glo models.
What accessories fit it?
Hatco lists 5-pleat fry box and 8-pleat fry bag hardcoated ribbons (19-1/4" W x 9-1/4" D x 2" H), food holding pans, wire trivets and Chef LED bulbs.
What colors are available?
Clear anodized is standard. At order time you can choose a Designer Color (Warm Red, Black, Gray Granite, White Granite, Navy Blue, Hunter Green, Antique Copper) or a Gloss finish (Gleaming Gold, Glossy Gray, Bold Black, Radiant Red, Brilliant Blue). Non-standard colors are non-returnable; the heated base is not powdercoated.
What is the Quick-Ship version?
Hatco keeps this 120V model with a built-in toggle switch in its Quick-Ship stock program (code FFBCL18120T). It is the same UGFFBL as the standard listing.
What warranty does it have?
Hatco's manual gives a limited warranty of one year from purchase, or 18 months from shipment from Hatco, covering defects in materials and workmanship. Light bulbs are not covered.
Specs
| Manufacturer | Hatco |
|---|---|
| Model Number | UGFFBL-120-T-QS |
| Series | Ultra-Glo Portable Foodwarmers |
| Type | Portable French Fry Warmer, Ceramic Element, Heated Base, 2 Display Lights |
| Version | Hatco Quick-Ship Stock Model120V with Built-In Toggle SwitchQuick-Ship Code FFBCL18120T |
| Shipping Weight | 34 lb. |
| Width | 12.77 Inches |
| Depth | 22.46 Inches |
| Height | 22 Inches |
| Element Housing Width | 9 Inches |
| Top Heat | Ceramic Heating Element |
| Base Heat | Heated Base, Thermostat Preset at Factory |
| Display Lights | 2 Incandescent, Protective Coating |
| Voltage | 120 Volts |
| Hertz | 60 Hz |
| Phase | Single Phase |
| Wattage | 1120 Watts |
| Amps | 9.3 Amps |
| Plug Type | NEMA 5-15P |
| Cord | 6 ft. Pre-WiredBack, Lower Middle |
| Control Type | Built-In ON/OFF Toggle Switch |
| Housing | Aluminum |
| Standard Finish | Clear Anodized |
| Factory Options | Designer ColorsGloss Finishes60 W Halogen Bulbs |
| Accessories | 5-Pleat Fry Box Ribbon8-Pleat Fry Bag RibbonFood Holding PansWire TrivetsChef LED Bulbs CLED-3000-120, CLED-4000-120 |
| Certifications | cULus, NSF |
| Made In | USA |
| Warranty | 1 Year from Purchase or 18 Months from Shipment |
| Warranty Details | Hatco Limited Warranty, Defects in Materials and WorkmanshipLight Bulbs Not Covered24/7 Parts and Service Assistance in US and Canada |
Certifications
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
What Our Customers Say

