Icetro IBO-HDWKIT Water Supply Option Kit for ID-H150-22 and ID-H250-30 Hotel Ice Dispensers
Adds a drinking water valve next to the ice chute on an Icetro hotel ice dispenser.
Icetro IBO-HDWKIT is the water supply option kit for the Icetro ID-H150-22 and ID-H250-30 hotel ice dispensers. It mounts a water dispensing valve on the front of the dispenser beside the ice chute and feeds it from a water inlet fitting at the rear. The kit includes the valve assembly, mounting bracket, bolts, washers and nuts, the brass inlet fitting with a JG push fitting, PE tubing and self-tapping screws.
A water dispensing valve mounts to the left of the ice chute, so guests get water and ice in one spot.
Valve assembly, bracket, mounting hardware, rear inlet fitting, PE tubing and self-tapping screws.
A hole-cutting guide sets the valve and mounting holes beside the ice chute opening.
Icetro lists IBO-HDWKIT as the water supply option for its ID-H150-22 and ID-H250-30 hotel dispensers (ID-H150/250).
Icetro's instructions use a 3-1/4" hole saw for the valve opening, a drill for the four mounting holes and the 1" rear inlet hole, and Teflon tape for the fittings.
At a water inlet fitting mounted in a 1" hole in the rear panel, 2" from the corner seam and 7-3/4" up from the bottom. PE tubing runs inside to the front valve.
Yes. Icetro equipment carries our Best Price Guarantee. Found it lower? Send us the lower price with a quote request or call us, and we will match it.
Specs
| Manufacturer | Icetro |
|---|---|
| Model Number | IBO-HDWKIT |
| Part Type | Hotel Dispenser Water Supply Option Kit |
| Fits | Icetro ID-H150-22Icetro ID-H250-30 |
| Kit Contents | Water Valve AssemblyBracketBolts, Washers and NutsBrass Inlet Fitting with JG FittingPE TubingSelf-Tapping Screws |
| Front Cut-Out | 3-1/4" Hole for Valve4 Mounting Holes |
| Rear Inlet Hole | 1" Hole, 2" from Corner Seam, 7-3/4" Up from Bottom |
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
