Kolpak PX7-1012-CT Polar-Pak 10' x 12' x 7' Floorless Walk-In Cooler, Top-Mount Refrigeration
Description
A 10' x 12' Polar-Pak cooler that sets on your existing floor, with a drop-in refrigeration unit on the roof that sits flush to the ceiling.
The Kolpak PX7-1012-CT is a Polar-Pak walk-in cooler, nominal 10' x 12' x 7', built without an insulated floor. The walls stand on 4" vinyl screeds anchored to your level floor, and a top-mounted, drop-in refrigeration unit fits flush to the ceiling. Panels are 4" foamed-in-place polyurethane with 26 gauge embossed Galvalume inside and out, locked together with cam locks. Kolpak's current Polar-Pak spec sheet is a family sheet. Refrigeration capacity, compressor, electrical service, box volume and shipping weight for this exact model are confirmed with your order.
Will it fit · Will it hook up
- Box size
- 10' x 12' nominal footprint; 7' nominal height. Ask us for the model's assembly drawing for exact inches
- Floor
- Floorless: walls set on 4" vinyl screeds on your level floor; 4" metal screeds are required in seismic locations
- Door
- 26" x 78" door with steel frame; a 34" door is a Kolpak option
- Clearance
- Kolpak calls for at least 2" between the walk-in and any adjacent wall or structure for air circulation
- Refrigeration
- Top-mounted drop-in Polar-Pak unit sits on the roof, flush to the ceiling; leave headroom above the box for it
- Door wiring
- Light, switch and door heaters are factory wired; typical door service is 120V, 60 Hz, single phase unless the installation drawing shows otherwise
Measure the ceiling height above the walk-in location: the top-mount unit adds height above the box roof.
Drop-in top mount
The Polar-Pak refrigeration unit drops into the ceiling panel and sits flush to the ceiling, with air circulating around the coils.
4-inch foamed panels
Panels are 100% foamed-in-place polyurethane, CFC and HCFC free, in 4" nominal thickness with tongue and groove edges.
Cam-lock assembly
Cam locks pull the panels into a rigid, air-tight seal. They turn with the 5/16" hex wrench packed in the hardware box.
Floorless on screeds
4" vinyl screeds with integral floor coves set the walls on your floor and the coved corners are easier to clean.
Door built for daily use
FRP door perimeter and jamb, deadbolt locking handle, adjustable spring-loaded hinges, closer and an interior safety release.
LED lighting
Energy-saving LED interior light, plus a low-wattage LED nightlight in the door section that stays on.
Delivery and setup
- Free shipping on this item. See our shipping policy for delivery details.
- Inspect every skid for damage before you sign, and note any damage on the delivery receipt.
- The walk-in arrives as panels for field assembly. Count wall panels, corners, ceilings and doors against the packing list, and use adequate people or lifting equipment: panels are not a one-person lift.
- The installation area must be level and clear. Kolpak recommends self-leveling epoxy or asphalt shingles to level the floor, and a thermal break under the screeds is recommended for coolers.
- Screeds go down on two beads of non-drying butyl sealant, each section with at least two fasteners, following the assembly drawing in the hardware box.
- Plan an electrician for the refrigeration and door connections, and keep the PVC film on the panels until assembly is finished.
Questions buyers ask
What is confirmed for this model?
Kolpak documents confirm the Polar-Pak construction, the 4" panels and vinyl screeds, the 26" x 78" door and the top-mount system. Kolpak's current Polar-Pak spec sheet is a family sheet. Refrigeration capacity, compressor, electrical service, box volume and shipping weight for this exact model are confirmed with your order.
Does it come with a floor?
No. This is a floorless cooler. The walls sit on 4" vinyl screeds anchored to your level floor; seismic locations need 4" metal screeds.
Which side is the door hinged on?
Kolpak builds Polar-Pak doors right- or left-hinged. Tell us the hinge side you need when you order.
What refrigerant does it use?
Kolpak's 2023 Polar-Pak sheet lists R448A refrigeration, while its 2024 Polar-Pak wiring diagrams show R454C units. The refrigerant for your unit is confirmed with your order.
What warranty does Kolpak give?
Kolpak warrants foamed-in-place panels for 10 years and component parts, doors and assemblies for 1 year, with 1-year labor. The Polar-Pak refrigeration includes a 1-year parts and labor warranty.
What options are available?
Kolpak lists an air shield, strip door, angle trim, interior or exterior ramp, a 34" door and a compact 18" LED light as popular Polar-Pak options. Ask us before you order.
Do you match lower prices?
Yes. Kolpak equipment carries our Best Price Guarantee. Found it lower? Send us the lower price with a quote request or call us, and we will match it.
Specs
| Manufacturer | Kolpak |
|---|---|
| Model Number | PX7-1012-CT |
| Series | Polar-Pak |
| Model Code | PX7 = Polar-Pak floorless cooler, 7' nominal height; 1012 = 10' x 12'; CT = cooler, top-mount refrigeration |
| Documentation | Kolpak's current Polar-Pak sheet is a family sheet; refrigeration, electrical, volume and weight for this model are confirmed at order |
| Nominal Size | 10' x 12' x 7' W x L x H |
| Width | 10 Feet Nominal |
| Length | 12 Feet Nominal |
| Height | 7 Feet Nominal |
| Door Size | 26" W x 78" H |
| Panels | 4" nominal, 100% foamed-in-place polyurethane, CFC and HCFC free, tongue and groove |
| Interior and Exterior Finish | 26 gauge embossed Galvalume |
| Panel Fasteners | Cam locks |
| Floor | Floorless; 4" vinyl screeds; 4" metal screeds required for seismic locations |
| Door Hardware | Deadbolt locking handleadjustable spring-loaded hingescloserinterior safety release |
| Door Frame | Steel frame; FRP door perimeter and jamb |
| Lighting | Energy-saving LED interior light; constant-burn LED nightlight in the door section |
| System | Polar-Pak top-mounted drop-in unit, flush to the ceiling |
| Refrigerant | R448A on Kolpak's 2023 Polar-Pak sheet; R454C on Kolpak's 2024 Polar-Pak wiring diagrams; confirmed at order |
| Door Section Service | 120V, 60 Hz, single phase typical for door light, switch and heaters |
| Clearance | 2" minimum to adjacent structures |
| Popular Options | Air shieldstrip doorangle triminterior or exterior ramp34" doorcompact 18" LED light |
| Warranty | 10-Year Panels, 1-Year Parts and Labor |
| Warranty Details | Foamed-in-place panels 10 years; component parts, doors and assemblies 1 year; 1-year labor; Polar-Pak refrigeration 1-year parts and labor |
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
What Our Customers Say







