Scotsman MC0530SR-1 Prodigy ELITE 30" Remote-Cooled Small Cube Ice Machine Head, 500 lb/24 hr, 115V 1-Ph
A 30-inch remote-cooled cube ice head rated up to 500 lb a day, with heat rejected at a remote condenser.
The Scotsman MC0530SR-1 is a Prodigy ELITE modular cube ice machine head that makes small cubes (7/8" x 7/8" x 3/8"). Scotsman rates it at 500 lb of ice per 24 hours at 70°F air and 50°F water, and 400 lb at 90°F air and 70°F water. It is remote cooled: the head connects to a Scotsman remote condenser through brazed line sets, and Scotsman lists the ERC111-1 condenser for it. It runs on 115/60/1 power and uses R-404A refrigerant. Like every modular head, it needs a bin or dispenser underneath, sold separately.
The head is 30" wide; plan the full stack height with the bin you choose (see the bin answer below).
Bluetooth pairing with the ICELINQ mobile app gives real-time diagnostics, settings and step-by-step guided cleaning without removing panels.
External indicator lights, including bin full, and a 16-segment display show machine status across the room.
Redesigned ice thickness and water sensors are easier to clean, and Preservation Mode helps keep the machine running and flags potential issues.
Adaptive purge optimizes water use to keep the machine cleaner; potable water use is 18.0 gallons per 100 lb of ice.
Heat is rejected at the remote condenser instead of in the room.
AgION antimicrobial protection guards internal surfaces for more sanitary operation between cleanings.
No. It is a head only. Scotsman's sizing chart pairs the MC0530 with the B330P (344 lb) or B530P/S (536 lb) with no bin top kit, the B842S with a KBT29 top, or the B948S with a KBT22B top. It also fits the HD30 hotel dispenser.
115V, 60 Hz, single-phase, 2 wires. Minimum circuit ampacity is 16.2 A, with a 20 A maximum fuse or HACR circuit breaker.
No. The spec sheet lists the Scotsman ERC111-1 remote condenser and BRTE10, 25, 40 or 75 ft line sets as accessories; line sets need brazing.
Small cubes, 7/8" x 7/8" x 3/8". Scotsman also builds this head in a medium cube version.
Scotsman prints 3 years parts and labor on all components, 5 years parts and labor on the evaporator, and 5 years parts on the compressor and condenser, valid in North, South and Central America for commercial installations.
Bin and dispenser choices on this listing: Scotsman B330P (344 lb), B530P or B530S (536 lb) 30" ice storage bins, or the HD30B-1 30" hotel cube dispenser (180 lb). Scotsman's sizing chart pairs this head with the B330P and B530P/S with no bin top kit and with the HD30. Also offered: AP1-P or SSM1-P water filter systems, which Scotsman lists for this head, and the XR-30 XSafe sanitation system. The ERC111-1 remote condenser is offered as an add-on; the head needs it or another approved remote condenser to run.
Specs
| Manufacturer | Scotsman |
|---|---|
| Model Number | MC0530SR-1 |
| Series | Prodigy ELITE Modular Cube Ice Machine Head |
| Ice Type | Small Cube, 7/8" x 7/8" x 3/8" |
| Condenser | Remote-Cooled |
| Shipping Weight | 175 lb. |
| Width | 30 Inches |
| Depth | 24 Inches |
| Height | 23 Inches |
| Shipping Carton | 33.5" x 27.5" x 28" |
| Ice per 24 hr at 70°F Air, 50°F Water | 500 lb. |
| Ice per 24 hr at 90°F Air, 70°F Water | 400 lb. |
| Voltage | 115 Volts |
| Hertz | 60 Hz |
| Phase | 1 |
| Circuit Wires | 2 |
| Minimum Circuit Ampacity | 16.2 A |
| Max Fuse or HACR Breaker | 20 A |
| BTU per Hour | 7,900 |
| Energy per 100 lb of Ice | 6.50 kWh at 90°F Air, 70°F Water |
| Potable Water per 100 lb of Ice | 18.0 Gallons |
| Refrigerant | R-404ACharge 160 oz. |
| Remote Condenser | ERC111-1, Sold Separately |
| Line Sets | BRTE10, BRTE25, BRTE40 or BRTE75Brazing Required |
| Water and Drain | 3/8" FPT Potable Water Inlet3/4" FPT Drain |
| Air Temperature | 50°F to 100°F |
| Water Temperature | 40°F to 100°F |
| Potable Water Pressure | 20 to 80 PSIG |
| Remote Condenser Temperature | -20°F to 120°F |
| Control Features | ICELINQ Bluetooth AppAutoAlert Panel with Bin Full LightPreservation ModeOptional KVS, KBILC, KSBU, KSBU-N, KPAS |
| Certifications | cETLus, NSF, AHRI Certified |
| Warranty | 3 Years Parts and Labor on All Components5 Years Parts and Labor on the Evaporator5 Years Parts on the Compressor and Condenser |
| Warranty Coverage Area | North, South and Central America, Commercial Installations |
Certifications
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
