Scotsman MC222SL-1 Prodigy ELITE Eclipse 22" Small Cube Remote Low-Side Ice Machine Head, Up to 1,030 lb./24 hr, 115V
A 22-inch small cube ice head that pairs with a remote Eclipse condensing unit, so the compressor and condenser sit outside and up to 1,030 lb. of ice a day comes from a small footprint.
The Scotsman MC222SL-1 is the ice head of the Prodigy ELITE Eclipse remote low-side system. It makes small cubes (7/8" x 7/8" x 3/8") and has no compressor or condenser of its own: it works with a Scotsman ECC remote condensing unit. With an ECC0800 unit it makes 850 lb. per 24 hours at 70°F air / 50°F water, and with an ECC1410 unit 1,030 lb. Scotsman says the remote condenser and compressor allow higher capacities in a smaller footprint while minimizing heat and noise output. The 22" W x 16.5" D x 29" H head runs on 115V and sits on a Scotsman bin or ice dispenser.
Plan the system as a set: head, ECC condensing unit, line set and bin are separate models.
The compressor and condenser live in the outdoor ECC condensing unit, which Scotsman says allows higher capacity in a smaller footprint with less heat and noise inside.
850 lb. per 24 hours with the ECC0800 unit or 1,030 lb. with the ECC1410 unit, at 70°F air / 50°F water.
Bluetooth pairing with the ICELINQ mobile app gives real-time diagnostics, settings and guided cleaning.
A 16-segment display and external indicator lights, including bin full, show machine status across the room.
The ice thickness and water sensor design is easier to clean and more durable. Preservation Mode helps maximize uptime and flags potential issues.
Purge water is optimized to keep the machine clean; potable water use is 18.0 gallons per 100 lb. of ice.
No. The MC222SL-1 is the low-side ice head. It needs a Scotsman ECC remote condensing unit (ECC0800-3, ECC1410-32 or ECC1410-3 on the spec sheet) and a line set.
850 lb. per 24 hours at 70°F air / 50°F water and 700 lb. at 90°F / 70°F with the ECC0800. With the ECC1410 it makes 1,030 lb. and 827 lb.
The head runs on 115V, 60 Hz, 1-phase with a cord and a 15 A max. fuse or HACR breaker. The condensing unit needs its own 208-230V circuit: ECC1410-32 is 1-phase, 15.8 A min. circuit ampacity, 30 A max. fuse.
Scotsman lists ID150/ABS, ID200 and ID250 dispensers and BL1048S, BL1360S and BL1660S bins, and says to contact Scotsman for bin top requirements.
Per 100 lb. of ice at 90°F air / 70°F water: 4.98 kWh with the ECC1410-32 or ECC1410-3, 5.20 kWh with the ECC0800-3, and 18.0 gallons of potable water.
3 years parts and labor on all components, 5 years parts and labor on the evaporator, and 5 years parts on the compressor and condenser, for commercial installations in North, South and Central America.
The spec sheet shows cULus, NSF and AHRI Certified marks.
Specs
| Manufacturer | Scotsman |
|---|---|
| Model Number | MC222SL-1 |
| Series | Prodigy ELITE Eclipse Remote Low-Side |
| Type | Remote Low-Side Cube Ice Machine Head |
| Ice Type | Small Cube7/8" x 7/8" x 3/8" |
| Condenser | Remote Condensing Unit, Sold Separately |
| Shipping Weight | 118 lb. |
| Width | 22 Inches |
| Depth | 16.5 Inches |
| Height | 29 Inches |
| Shipping Carton | 25" x 20" x 35" |
| Capacity | Up to 1,030 lb. per 24 Hours |
| Production with ECC1410 | 1,030 lb. at 70°F Air / 50°F Water827 lb. at 90°F Air / 70°F Water |
| Production with ECC0800 | 850 lb. at 70°F Air / 50°F Water700 lb. at 90°F Air / 70°F Water |
| Voltage | 115 Volts |
| Hertz | 60 Hz |
| Phase | 1 |
| Circuit Wires | 2 |
| Max. Fuse or HACR Breaker | 15 Amps |
| Connection | Cord |
| Voltage Tolerance | -5% to +10% |
| ECC1410-32 | 208-230/60/130 A Max. Fuse15.8 A Min. Circuit Ampacity4.98 kWh per 100 lb. |
| ECC1410-3 | 208-230/60/320 A Max. Fuse11.6 A Min. Circuit Ampacity4.98 kWh per 100 lb. |
| ECC0800-3 | 208-230/60/315 A Max. Fuse10.6 A Min. Circuit Ampacity5.20 kWh per 100 lb. |
| Refrigerant | R-404A |
| Heat Rejection | 13,700 BTU per Hour 800 lb. System20,000 BTU per Hour 1,000 lb. System |
| Potable Water Use | 18.0 Gallons per 100 lb. of Ice at 90°F Air / 70°F Water |
| Water Inlet | 3/8" Potable Water Inlet |
| Drain | 3/4" PVC Female |
| Refrigerant Lines | 3/8" Liquid Line1/2" Cool Vapor Line3/4" Suction Line |
| Service Access | Rear, Left and Right Side |
| Air Temperature | 50°F to 100°F |
| Water Temperature | 40°F to 100°F |
| Potable Water Pressure | 20 to 80 PSIG |
| Remote Condenser Temperature | -20°F to 120°F |
| Controls | AutoAlert Panel with 16-Segment Display and Bin Full LightICELINQ App via BluetoothPreservation ModeUltrasonic Bin Level Sensor |
| Sanitation | WaterSense Adaptive PurgeAntimicrobial Protection |
| Bin and Dispenser Options | ID150/ABSID200ID250BL1048S 1,000 lb.BL1360S 1,320 lb.BL1660S 1,660 lb. |
| Line Sets | 3BRTE20-EH 20 ft.3BRTE35-EH 35 ft.3BRTE50-EH 50 ft.3BRTE75-EH 75 ft.Refrigerant and Brazing Required |
| Optional Controls | KSBU Smart-BoardKSBU-N Smart-Board with Network |
| Optional Sanitation | XR-30 XSafe Sanitation System |
| Certifications | cULus, NSF, AHRI Certified |
| Made In | Designed, Engineered and Assembled in USA |
| Warranty | 3 Years Parts and Labor on All Components |
| Evaporator Warranty | 5 Years Parts and Labor |
| Compressor and Condenser Warranty | 5 Years Parts |
| Warranty Terms | Commercial Installations in North, South and Central AmericaResidential Applications 1 Year Parts and Labor |
Certifications
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
