Scotsman NH0922R-32 Prodigy Plus Nugget Ice Machine Head, H2 Nugget, Remote-Cooled, 896 lb/24 hr, 208-230V 1-Phase
Makes up to 896 lb of harder, slower-melting nugget ice a day in a 22.9-inch-wide head that sits on a Scotsman bin or dispenser.
The Scotsman NH0922R-32 is the remote-cooled version of the N0922 Prodigy Plus nugget ice machine. It makes harder, slower-melting H2 Nugget ice, which Scotsman suggests for dispensing. Scotsman rates it at 896 lb per 24 hours at 70°F air and 50°F water, and 758 lb at 90°F air and 70°F water. The condenser is a separate remote unit (ERC311-32 on Scotsman's sheet), joined to the head by a brazed line set. The head runs on 208-230/60/1. It is a head only: order a bin or dispenser separately.
Measure doorways for the 25.5" wide carton, and plan the bin or dispenser before the head arrives.
Sealed, maintenance-free bearings need no grease and cut preventive maintenance. The evaporator and auger are stainless steel.
This model makes H2 Nugget ice. Scotsman offers the softer Original Chewable Nugget for bins and the harder H2 Nugget for dispensing; check the model letter (NS soft, NH hard) before you order.
External indicator lights show machine status across the room and signal when it is time to descale or sanitize. A unit-specific QR code links to service manuals, cleaning guides and warranty history.
The condenser is a separate ERC311-32 unit, rated by Scotsman for -20°F to 120°F at the condenser. Scotsman offers 10, 25, 40 and 75 ft line sets; brazing is required.
AgION antimicrobial protection guards internal surfaces between cleanings.
KVS Vari-Smart ice level control lets you program bin levels. KSBU Smart-Board adds diagnostic data, KSBU-N adds a network connection, and KPAS combines both kits.
No. It is an ice machine head. Scotsman lists these bins and dispensers for the N0922: B530P or B530S 30" bin, 536 lb; B842S 42" bin, 778 lb; B948S 48" bin, 893 lb; IOD200 or IOD250 dispenser. Contact Scotsman for bin top requirements.
896 lb per 24 hours at 70°F air and 50°F water, and 758 lb at 90°F air and 70°F water.
208-230/60/1, 15 A maximum fuse or HACR breaker, 11.7 A minimum circuit ampacity, 2 circuit wires. The sheet also lists the ERC311-32 remote condenser for this model.
No. Scotsman lists the ERC311-32 remote condenser as an accessory for this model, with line sets from 10 to 75 ft. Brazing is required.
This NH model makes the harder H2 Nugget ice, which melts more slowly and suits dispensing. The NS version of the same machine makes the softer Original Chewable Nugget.
4.24 kWh and 12.0 gallons of potable water per 100 lb of ice at 90°F air and 70°F water.
3 years parts and labor on all components and 5 years parts on the compressor, for commercial installations in North, South and Central America. Residential use: 1 year parts and labor.
Specs
| Manufacturer | Scotsman |
|---|---|
| Model Number | NH0922R-32 |
| Series | N0922 Prodigy Plus |
| Type | Modular Nugget Ice Machine Head, Remote-Cooled |
| Ice Type | H2 Nugget IceHarder |
| Shipping Weight | 210 lb. |
| Width | 22.9 Inches |
| Depth | 24 Inches |
| Height | 27 Inches |
| Shipping Carton | 25.5" x 27.5" x 32.5" |
| Side by Side Pair | 45.8" W x 24" D x 27" H |
| Ice per 24 hr at 70°F Air / 50°F Water | 896 lb. |
| Ice per 24 hr at 90°F Air / 70°F Water | 758 lb. |
| Voltage | 208-230 Volts |
| Hertz | 60 Hz |
| Phase | 1 |
| Max Fuse or HACR Breaker | 15 Amps |
| Circuit Wires | 2 |
| Minimum Circuit Ampacity | 11.7 Amps |
| Condenser | Remote-Cooled |
| Refrigerant | R-404ACharge 192.0 oz. |
| BTU per Hour | 10,500 BTU/hr |
| Remote Condenser | ERC311-32, Sold SeparatelyLine Sets BRTE10, BRTE25, BRTE40, BRTE75Brazing Required |
| Energy per 100 lb Ice at 90/70 | 4.24 kWh |
| Potable Water per 100 lb Ice | 12.0 Gallons |
| Connections | 3/8" Flare Water Inlet3/4" FPT Drain3/8" Liquid Line1/2" Discharge Line |
| Operating Range | Air 50-100°FWater 40-100°FWater Pressure 20-80 PSIGVoltage -5% to +10% |
| Compatible Bins and Dispensers | B530P or B530S 30" bin, 536 lbB842S 42" bin, 778 lbB948S 48" bin, 893 lbIOD200 or IOD250 dispenser |
| Optional Kits | KVS Vari-Smart Level ControlKSBU Smart-BoardKSBU-N Smart-Board with NetworkKPAS Kit |
| Certifications | cULus, NSF, AHRI Certified |
| Warranty | 3 Years Parts and Labor5 Years Compressor Parts |
| Warranty Terms | Commercial Installations in North, South and Central AmericaResidential 1 Year Parts and Labor |
Certifications
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
