Description
A landing table for clean racks coming out of the dish machine.
The Serv-Ware CDT24R-CWP-V is a 24" clean dish table for restaurants, cafeterias and catering kitchens. It is the right-hand version: it sits on the right side of the dish machine, with its legs at the outer end and the open end toward the machine, per the spec sheet drawing. The top is 16 gauge 304 stainless steel with a 7.5" backsplash, and the table is NSF listed.
Will it fit · Will it plug in
- Outside size
- 24" W × 30" D × 41.5" H (to the top of the backsplash)
- Top
- 30" deep at the leg end, narrowing at a 45° corner to 20.5" at the machine end; 18" of the length is full depth
- Hand
- Right-hand: sits on the right side of the dish machine; Serv-Ware also makes a left-hand version
- Backsplash
- 7.5" high
- Legs
- One pair at the outer end; galvanized with adjustable plastic bullet feet
- Shipping weight
- 32 lbs
Check your dish machine's connection height and side before ordering. Measure the space beside the machine and the doorways on the delivery path.
Built for the clean side
Gives clean racks a place to drain and cool as they leave the machine, on the right side.
16 gauge 304 stainless
The top is 16 gauge 304 series stainless steel, and the table is NSF listed.
7.5" backsplash
Keeps water and splashes off the wall behind the table.
Level on any floor
Galvanized legs with adjustable plastic bullet feet let you match the machine height and level the table.
Delivery and setup
- Free shipping on this item. See our shipping policy for delivery details.
- Usually ships in 1 business day.
- Covered by our Best Price Guarantee.
- Installation and connection to the dish machine are done on site; Serv-Ware recommends a qualified installer.
- Inspect the shipment when it arrives and note any damage with the carrier before signing.
Questions buyers ask
Left or right: which one do I need?
Stand facing the dish machine. If clean racks come out on your right, you need the right-hand table. Serv-Ware also makes a left-hand version.
Does it stand on its own?
No. The drawing shows one pair of legs at the outer end; the other end is meant to rest on or connect to your dish machine.
How big is it?
24" wide, 30" deep and 41.5" high to the top of the 7.5" backsplash. The top narrows to 20.5" deep at the machine end.
Is it NSF listed?
Yes. Serv-Ware lists the clean dish tables as NSF, and the spec sheet carries the NSF and 304 stainless marks.
What does the warranty cover?
Serv-Ware warrants it against defects in material and workmanship for 1 year from installation, up to 18 months from shipment from Serv-Ware. Labor is not included, and residential use is excluded.
When will it ship, and do you match lower prices?
It usually ships in 1 business day, shipping is free on this item, and it is covered by our Best Price Guarantee. Call (201) 467-8222 if you find a lower price.
Specs
| Manufacturer | Serv-Ware |
|---|---|
| Model Number | CDT24R-CWP-V |
| Quantity | 1/Each |
| Shipping Weight | 32 lb. |
| Width | 24 Inches |
| Depth | 30 Inches |
| Height | 41.5 Inches |
| Depth at Machine End | 20.5 Inches |
| Backsplash Height | 7.5 Inches |
| Leg Spacing (Front to Back) | 18.88 Inches |
| Configuration | Right-Hand (Table Right of Machine) |
| Material | 16 Gauge 304 Series Stainless Steel |
| Legs | 2 Galvanized Legs at Outer EndAdjustable Plastic Bullet Feet |
| Certifications | NSF |
| Warranty | 1 Year Parts (No Labor)Up to 18 Months from Shipment |
| Usage | Commercial Use Only |
Certifications
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.