Summit HC24WWADA 24" Under Cabinet Convertible Range Hood, ADA Compliant, White, 270 CFM, 2-Speed Fan, 115V
Description
A 24-inch white under cabinet hood rated at 270 CFM that runs ducted or ductless.
The Summit HC24WWADA is a 24" under cabinet range hood in a matte white powder coat over 21 gauge steel. Its two-speed fan moves up to 270 CFM, and the vents angle slightly upward so smoke is not blown toward the cook. It ships set for recirculating use and converts to ducted venting through the top or rear. It takes a standard incandescent bulb (not included) and is hard-wired by a licensed professional. A remote terminal block and wall switch cover are included, so the controls can be mounted lower on the wall, apart from the hood, per Sections 308 and 309 of the ADA Guidelines.
Will it fit · Will it hook up
- Outside size
- 23-7/8" W x 20" D x 5-1/2" H
- Cooktop width
- Sized for 24" cooking surfaces
- Venting
- Ducted (top or rear) or recirculating; duct: 3-1/4" x 10" rectangular or 6" or 7" round with transition
- Power
- 115V, 60 Hz, 1.7 A; hard-wired, no cord
- Controls
- Remote wall switch, mounted at an accessible height
Round duct needs a transition, which is not included.
270 CFM airflow
Two-speed fan with high and low settings; Summit rates it at 6 sones.
Angled airflow
The vents point slightly upward so smoke and odors are not blown toward the cook.
Convertible venting
Ships set to recirculate; converts to ducted use through the top or rear in a few steps.
Snap-in combination filter
One aluminum mesh filter with charcoal filler catches grease, smoke and odors. It and the lens cover snap out without tools.
21 gauge steel
Matte white powder coat over 21 gauge steel. Made in North America and TAA compliant.
ADA wall switch
Remote terminal block and wall switch cover included, so the controls mount separately at an accessible height.
Delivery and setup
- Inspect the carton for damage before you sign, and note any damage on the delivery receipt.
- The hood has no power cord. Summit designs it to be hard-wired to a 115V, 60 Hz circuit by a licensed professional.
- It ships set for recirculating use. For ducted use, plan a 3-1/4" x 10" duct, or a round duct with a transition that you supply.
- Mount the included wall switch and terminal block where the controls meet your ADA layout.
Questions buyers ask
Will it fit my cooktop?
The HC24WWADA is 23.88" wide, 20" deep and 5.5" tall. Summit sizes it for 24" cooking surfaces.
Can it vent outside or recirculate?
Both. It ships set to recirculate and converts to ducted venting through the top or rear. Summit lists the duct as 3-1/4" x 10" rectangular or 6" or 7" round with transition.
What power does it need?
115V, 60 Hz, 1.7 amps. It has no cord and is hard-wired by a licensed professional.
Is a light bulb included?
No. The hood takes a standard incandescent bulb, which is not included. The lens cover snaps off without tools.
How loud and strong is it?
Summit rates it at up to 270 CFM and 6 sones, with two fan speeds.
What makes it ADA compliant?
It runs from a wall switch. A remote terminal block and switch cover are included so the controls can be mounted lower, per Sections 308 and 309 of the ADA Guidelines.
What certifications and warranty does it have?
Summit lists it as ETL and ETL-C listed, with a 1-year parts and labor warranty.
Specs
| Manufacturer | Summit |
|---|---|
| Model Number | HC24WWADA |
| Type | 24" Under Cabinet Convertible Range Hood, ADA Compliant |
| Installation | Under Cabinet |
| Venting | Convertible: Ducted or Recirculating |
| Finish | White, Matte Powder Coat |
| Unit Weight | 12 lb. |
| UPC | 761101107219 |
| Width | 23.88 Inches |
| Depth | 20 Inches |
| Height | 5.5 Inches |
| Nominal Size | 24" W x 20" D x 6" H |
| Maximum Airflow | 270 CFM |
| Sone Rating | 6 |
| Fan Speeds | 2, High and Low |
| Duct Connection | 3-1/4" x 10" rectangular or 6" or 7" round with transition |
| Light | Accepts 1 Standard Incandescent Bulb, Bulb Not Included |
| Filters | Combination Aluminum Mesh and Charcoal Filter, Snap-In |
| Voltage | 115 Volts |
| Hertz | 60 Hz |
| Amps | 1.7 Amps |
| Connection | Hard-Wired by a Licensed Professional, No Power Cord |
| Controls | Remote Wall Switch With Terminal Block and Switch Cover, Included |
| Construction | 21 Gauge Steel, Powder-Coated |
| Country of Origin | Made in North America, TAA Compliant |
| Certifications | ETL, ETL-C |
| ADA | Designed for Installation per Sections 308 and 309 of the ADA Guidelines |
| Warranty | 1 Year Parts and Labor |
Certifications
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
What Our Customers Say


