Waring MXE2000 Ellipse Blending System, Top-Down Dual-Motor Blender with MX1500 Base, Sound Enclosure, Cordless Drive, 120V
Description
A fully automated blender that drives the blend from the top and the bottom, so thick drinks blend without a tamper.
The Waring MXE2000 Ellipse pairs the MX1500 base (3.5 HP, 30K RPM) with a lithium-powered Ellipse Drive that sits on top of the jar and turns a dasher along the jar walls. The dasher pushes ingredients back into the blade, which cuts blend times and stops air pockets. It comes with a sound enclosure, docking station and charging station, and runs on 120V, 1500 W, 12.5 A.
Will it fit · Will it plug in
- Outside size
- 10-1/2" W x 14-1/2" D x 20-1/2" H, including the docking station
- Charging station
- 5-1/2" W x 6-1/2" D x 2-1/2" H
- Power
- 120V, 60 Hz, 1500 W, 12.5 A, 6 ft. cord
- Weight
- 20 lb. out of the box
Top-down dual-motor blending
The Ellipse Drive turns the dasher from the top while the MX1500 base spins the blade, so the blend stays consistent.
No tamper needed
The lid and dasher break up air pockets and push ingredients back into the blade.
Two drive modes
Manual runs 10, 15 or 20 seconds at a button press; Auto Start runs 30 seconds when the sound enclosure closes.
Cordless, quick charging
The lithium-powered drive charges in 2 hours and one charge lasts a full service day (4-6 hours of run time).
MX1500 base
3.5 HP, 30K RPM motor, backlit LCD keypad, adjustable speed, four programmable beverage stations and dual PULSE.
Redesigned sound enclosure
The SE1500 enclosure cuts noise and vibration, fits all MX bases with the new jar pad and adaptor ring, and is required for Auto Start.
Delivery and setup
- Free shipping on this item. See our shipping policy for delivery details.
- In the box: MXEBU base unit with jar pad and adaptor ring, MXEFJA full jar assembly (jar, lid, dasher and drive), MXECHG1 single charging station, MXEDS1 docking station and SE1500 sound enclosure kit.
- Inspect the box for damage before you sign for the delivery.
Questions buyers ask
What does the Ellipse Drive do?
It is a lithium-powered unit that sits on the lid and turns the dasher inside the jar. The dasher scrapes the walls and pushes ingredients back into the blade, so you do not need a tamper.
How long does the drive battery last?
Waring says it charges in 2 hours and one charge lasts a full service day, with 4-6 hours of operational run time.
How does Auto Start work?
Hold AUTO START for 3 seconds; the drive then runs for 30 seconds when the sound enclosure is closed. Auto Start needs the SE1500 sound enclosure.
What outlet does it need?
A 120V, 60 Hz outlet. The base draws 1500 W and 12.5 A on a 6 ft. cord.
Can I add more drives or chargers?
Yes. Waring sells single and triple charging stations separately; the MXECHG3 triple station suits chain restaurants and other high-volume sites.
Can I retrofit an existing MX blender?
Waring offers the CAC190 complete retrofittable kit for MX series blender bases.
Is it NSF listed?
Yes. The spec sheet shows the NSF mark and the TÜV Rheinland C-US mark.
Specs
| Manufacturer | Waring Commercial |
|---|---|
| Model Number | MXE2000 |
| Series | Ellipse |
| Quantity | 1/Each |
| Shipping Weight | 23 lb. |
| Product Weight | 20 lb. |
| Box Dimensions | 18.75" L x 11.125" W x 22.25" H |
| Width | 10-1/2 Inches |
| Depth | 14-1/2 Inches |
| Height | 20-1/2 Inches |
| Dimension Note | Width and depth include the docking station |
| Charging Station Size | 5.5" W x 6.5" D x 2.5" H |
| Voltage | 120 Volts |
| Hertz | 60 Hz |
| Wattage | 1,500 Watts |
| Amps | 12.5 Amps |
| Cord Length | 6 ft. |
| Base Motor | 3.5 HP, 30K RPM, MX1500 Base |
| Controls | Electronic Membrane Keypad, Blue Backlit LCD, Adjustable Speed, 4 Programmable Stations, Dual PULSE |
| Drive Modes | Manual 10, 15 or 20 SecondsAuto Start 30 Seconds with Enclosure Closed |
| Drive Battery | Lithium, Charges in 2 Hours, 4-6 Hours Run Time |
| Jar | Cylindrical, with Lid and Dasher System |
| Sound Enclosure | SE1500, Retrofits All MX Bases with Jar Pad and Adaptor Ring |
| In the Box | MXEBU Base Unit with Jar Pad and Adaptor RingMXEFJA Full Jar AssemblyMXEDR Ellipse DriveMXECHG1 Single Charging StationMXEDS1 Docking StationSE1500 Sound Enclosure Kit |
| Optional | MXECHG3 Triple Charging StationCAC188 32 oz. Cylindrical Copolyester ContainerCAC187 Jar with Dasher, Lid and BladeCAC190 Retrofit Kit for MX Bases |
| Certifications | NSF, cTÜVus |
| Country of Origin | Made in USA with US and Foreign Parts |
Certifications
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
What Our Customers Say





