Wells BMW-206STDU Bottom-Mount Drop-In Hot Food Well, 12" x 20" Pan, Square Corners, Thermostat, Insulated, Drain, 208/240V
A fully insulated bottom-mount well that holds one 12" x 20" pan of hot food under a flush countertop edge.
The Wells BMW-206STDU is a single-well, square-corner warmer from the BMW206S series that mounts up under the countertop. It holds one standard 12" x 20" pan or fractional insets with a 1/2" NPT drain, with a thermostat in a recessed front panel. Insulation on all four sides and the bottom speeds preheat and recovery. It runs on 208/240V single phase and is hard-wired.
Check the counter: this bottom-mount warmer needs a cutout with square corners and access from below for service.
The well mounts up under the counter opening, so the countertop forms a flush, easy-to-wipe edge around the 12" x 20" pan.
Square-cornered well holds a full-size 12" x 20" pan or fractional pans with less wasted space at the corners.
Insulation on all four sides and the bottom gives quicker preheat, faster recovery and lower energy use.
A thermostat in a recessed front panel holds the set temperature; a ready light and high limit come standard.
Run it with water for best results or dry with a 6" deep pan, as Wells' manual describes.
A 1/2" NPT drain at one end empties the well for daily cleaning without lifting the unit.
Wells prints the cutout on the installation instructions shipped with the unit. The warmer body is 13-11/16" x 21-13/16" and mounts from below the counter.
208/240V single phase. It draws 1240 W at 208V and 1650 W at 240V. It is hard-wired; no cord is supplied.
It has a 1/2" female NPT drain nipple at one end. Wells offers drain valve extension kit 20385 to bring the valve handle to the counter front.
Yes. Wells rates it for wet or dry use and recommends wet for best results. Do not switch between wet and dry without letting the well cool to room temperature first.
Wells says to add about 1" of hot tap water before turning the warmer on, then preheat on the highest setting for about 30 minutes with the pan covered. Always hold food in an inset or pan, never directly in the well, and never add water to a dry, hot well.
One standard 12" x 20" inset pan or fractional pans. Wells adapter tops (20176, 20434, 21615, 21621, 21624) let it hold round 2-1/2, 4, 7 or 11 qt. insets.
Wells lists a 1-year parts and labor warranty, from installation or 18 months from purchase, whichever comes first, serviced by a Wells-authorized agency.
Specs
| Manufacturer | Wells |
|---|---|
| Model Number | BMW-206STDU |
| Series | SS206E / BMW206S Bottom-Mount Warmers |
| Type | Bottom-Mount Drop-In Rectangular Hot Food Well, Square Corners |
| Shipping Weight | 22 lb. |
| Width | 13-11/16 Inches |
| Depth | 21-13/16 Inches |
| Height | 8-5/16 Inches |
| Control Panel | 5-7/8" W x 6-1/4" H |
| Clearances | Back 1"Sides 1"Bottom 6-3/4"Front 4-1/8" |
| Capacity | 1 Full-Size 12 x 20 Pan |
| Pan Options | 1 Standard 12" x 20" Inset Pan or Equivalent Fractional Pans |
| Voltage | 208/240 Volts |
| Phase | 1 |
| Wattage | 1240 W at 208V1650 W at 240V |
| Connection | Hard-Wired, Power Cord Not Supplied |
| Control Type | Thermostatic, Recessed Front PanelTemperature-Ready Indicator LightHigh Limit |
| Exterior | Stainless Steel |
| Well | Heavy-Gauge Deep-Drawn Stainless Steel Pan, Square CornersOne-Piece Top Flange |
| Insulation | Fully Insulated, 4 Sides and Bottom |
| Heating | Tubular Elements Under the Warming Pan |
| Wet or Dry | Wet or DryWet Recommended for Best Results |
| Drain | 1/2" Female NPT |
| Certifications | UL |
| Warranty | 1 Year Parts and Labor |
| Warranty Terms | 1 Year from Original Installation or 18 Months from Purchase, Whichever Comes FirstWells-Authorized Service Agency |
Certifications
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
