Wells H-336 Built-In Electric Hot Plate, 1 Spiral Element, 10" Round, 208/240V Single Phase
A single drop-in electric burner for a metal counter: a round spiral element with its own front control box.
The Wells H-336 is a built-in hot plate with one flat spiral element in a 10" round trim. The element drops into an 8-7/8" round countertop hole, and a separate control box with an infinite control and power-on light mounts to the counter apron. It runs on 208V (2,000 W) or 240V (2,600 W), single phase, and is hardwired. A chrome-plated drip tray sits under the element.
Get the Wells installation sheet to your counter fabricator before cutting: cutout and apron sizes must match.
A flat spiral element gives more surface contact with the pan and is self-cleaning.
A chrome-plated drip tray sits directly below the element and lifts out for cleaning.
Each element has an infinite control with a positive-off position, plus a signal light that shows when power is on.
Knobs sit in a recessed, one-piece drawn stainless steel panel to help prevent accidental temperature changes.
The 5-7/8" W x 6-1/4" H control box mounts to the counter apron, connected to the element by its lead wires.
8-7/8" round countertop hole; 4-9/16" W x 4-7/8" H apron cutout for the control box. Install it in a metal counter only.
208V or 240V, single phase. It draws 9.4 A at 208V (2,000 W) and 10.8 A at 240V (2,600 W). It has no cord and is hardwired.
Plan for 9" below the counter including the metal shield. Wells lists minimum clearances of back 1", side 2", bottom 8", front 4-1/8" to the nearest surface.
Wells lists it as Underwriters Laboratories Recognized and meeting NSF International standards (NSF Std 4).
Wells covers it for one year, parts and labor, against defects in material and workmanship. Repairs must be done by a Wells authorized service agency.
Specs
| Manufacturer | Wells |
|---|---|
| Model Number | H-336 |
| Type | Built-In Electric Hot Plate |
| Elements | 1 Flat Spiral |
| Installed Weight | 3 lb. |
| Shipping Weight | 6 lb. |
| Width | 10 Inches |
| Depth | 10 Inches |
| Element Trim Diameter | 10" |
| Depth below Counter | 9" below the counter including the metal shield |
| Controls | 5-7/8" W x 6-1/4" H control box |
| Cutout | 8-7/8" round countertop hole4-9/16" W x 4-7/8" H apron cutout for the control box |
| Minimum Clearances | Back 1"side 2"bottom 8"front 4-1/8" |
| Counter | Metal Counters Only |
| Voltage | 208/240 Volts |
| Phase | 1 |
| Watts | 2,000 W at 208V2,600 W at 240V |
| Amps | 9.4/10.8 Amps |
| Connection | Hardwired, Terminal Block in Control Box |
| Plug Type | No Plug, Hardwired |
| Field Wiring | 14 AWG Cu, 90°C |
| Control Type | Infinite Control with Positive OffSignal Light |
| Certifications | UL Recognized Component, NSF Std 4 |
| Warranty | 1 Year Parts and Labor |
Certifications
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
