Wells HDTG-3630G 36" HD Countertop Gas Griddle, Thermostatic Controls, 3/4" Plate, 90,000 BTU, Natural Gas with LP Kit
Description
An extra heavy-duty 36-inch countertop gas griddle with a 3/4-inch plate and 3 thermostatic controls.
The Wells HDTG-3630G is part of the HD Gas Counter Griddle line. A 3/4" griddle plate gives quick preheat, even heat and fast recovery. Each of the 3 controls is a thermostat you set from 200°F to 450°F, so every section holds the temperature you pick. It is rated 90,000 BTU/hr, leaves the factory set for natural gas, and comes with a propane conversion kit.
Will it fit · Will it hook up
- Outside size
- 36-1/8" W x 31-11/16" D x 17" H, height includes 4" legs
- Gas
- 90,000 BTU/hr total; 3/4" NPT inlet at the rear; regulator supplied
- Gas pressure
- Manifold 5.0" W.C. natural gas, 10" W.C. propane
- Clearance
- 0" back, sides and front from non-combustible surfaces; 4" below, so the 4" legs must be installed
Measure the counter: the griddle needs 36-1/8" of width and 31-11/16" of depth.
3/4" griddle plate
The thick plate preheats quickly, spreads heat evenly and recovers fast between loads.
3 thermostatic controls
Thermostats hold each section from 200°F to 450°F. The manual lists 3 dual burners, each with its own control.
Adjustable air shutters
Each control has an adjustable air shutter to set the air mix for clean combustion.
Front grease trough
A full-width front grease trough drains into a large removable drip pan for clean-up.
Stainless and service-friendly
Stainless steel front, sides and splash guard. The front panel comes off for access to the controls.
Natural gas or LP
Ships set for natural gas. A propane conversion kit is in the box; a qualified technician does the conversion.
Delivery and setup
- Inspect the crate for damage before you sign, and note any damage on the delivery receipt.
- The griddle ships at about 397 lb. and weighs about 287 lb. installed. Plan enough people to lift it onto the counter.
- A qualified gas installer connects it. Install the supplied regulator with the flow arrow pointing toward the griddle, and fit a drip leg upstream of the regulator.
- It leaves the factory adjusted for natural gas from sea level to 2,000 feet. For propane or higher elevations, have an authorized Wells service agent convert it with the included kit.
- Install it on the 4" legs on a level, non-combustible surface; Wells requires at least 4" under the unit.
Questions buyers ask
Does it run on propane?
Yes. It ships set for natural gas and Wells includes the propane conversion kit. The conversion should be done by an authorized service agent.
What gas hookup does it need?
A 3/4" NPT connection at the rear. The total rating is 90,000 BTU/hr. Manifold pressure is 5.0" W.C. on natural gas and 10" W.C. on propane, set by the supplied regulator.
How is the temperature controlled?
Each control is a thermostat set from 200°F to 450°F.
How much counter space does it need?
36-1/8" wide and 31-11/16" deep, 17" high on its 4" legs. Clearance to non-combustible surfaces is 0" at the back, sides and front.
How do I clean it?
Scrape the plate into the full-width front grease trough, which drains into the removable drip pan. Empty and wash the drip pan daily.
What warranty does it have?
Wells lists a one-year parts and labor warranty for the HD gas griddles.
Specs
| Manufacturer | Wells |
|---|---|
| Model Number | HDTG-3630G |
| Series | HD Gas Counter Griddles |
| Shipping Weight | 397 lb. |
| Installed Weight | 287 lb. |
| Width | 36-1/8 Inches |
| Depth | 31-11/16 Inches |
| Height | 17 Inches |
| Height Note | Includes 4" Legs |
| Clearance | Non-Combustible: Back 0"Sides 0"Front 0"Bottom 4" |
| Fuel Type | Natural GasPropane Conversion Kit Included |
| Total BTU | 90,000 BTU/hr |
| Burners | 3 Dual Burners, Individual Control |
| Gas Inlet | 3/4" NPT, Rear |
| Manifold Pressure | Natural Gas 5.0" W.C.Propane 10" W.C. |
| Regulator | Supplied, Factory Set |
| Griddle Plate | 3/4" Thick |
| Control Type | Thermostatic, 200°F to 450°F |
| Number of Controls | 3 |
| Exterior | Stainless Steel Front, Sides and Splash Guard |
| Grease Management | Full-Width Front Grease TroughRemovable Drip Pan |
| Legs | 4" Adjustable Heavy-Duty Steel |
| Accessories | Additional Set of 4 Adjustable Legs, 20563 |
| Certifications | NSF, cULus |
| Warranty | 1 Year Parts and Labor |
Certifications
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
What Our Customers Say


