Wells HMP-6D Drop-In Hot Food Well, 6" x 20" Half-Size Pan, Top-Mount, Thermostat, Drain, 120V

Wells HMP-6D Drop-In Hot Food Well, 6" x 20" Half-Size Pan, Top-Mount, Thermostat, Drain, 120V

WellsSKU: WLS-HMP-6D

Price:
Regular price$1,602.00
  • Warranty · 1-yr Parts and Labor

Secure checkout

Apple Pay Diners ClubDiscoverGoogle Pay Mastercard Shop Pay Visa

Talk to an equipment specialist

Mon–Sat 8 AM–5 PM ET

Questions about size, power, delivery or a quote for several units?

Call

Will it fit · Will it plug in

Outside (W × D × H)6‑3/8" × 20‑3/4" × 7‑9/16"
Power120V · 750 W · 6.25 A
Capacity1 Half-Size 6x20 Pan
Shipping weight11 lb.
ListedUL Recognized Component

Highlights

  • Top-mount drop-in warmer for one 6" x 20" half-size pan or fractional insets
  • 6-3/8" W x 20-3/4" D x 7-9/16" H; control panel 3-5/16" W x 4-7/16" H
  • 120V single phase, 750 W, 6.25 A, hard-wired
  • Thermostatic control with ready light and high limit
  • 1/2" NPT drain; wet or dry operation, wet recommended
  • UL Recognized Component; 1-year parts and labor warranty

Specifications

ManufacturerWells
Model NumberHMP-6D
SeriesHMP6 / HSW6 Half-Size Warmers
TypeTop-Mount Drop-In Half-Size Rectangular Hot Food Well, 6" x 20" Pan
Shipping Weight11 lb.
Width6-3/8"
Depth20-3/4"
Height7-9/16"
Control Panel3-5/16" W x 4-7/16" H
ClearancesBack 1", Sides 2", Bottom 9", Front 2-5/8"
Capacity1 Half-Size 6x20 Pan
Pan Options1 Half-Size 6" x 20" Food Pan or Equivalent Fractional Inset Pans
Voltage120V
Phase1
Wattage750 W
Amps6.25 A
ConnectionHard-Wired, Power Cord Not Supplied
Control TypeThermostatic, Recessed Front Panel, Temperature-Ready Indicator Light, High Limit
ExteriorStainless Steel
WellHeavy-Gauge Deep-Drawn Stainless Steel Pan, One-Piece Top Flange
HeatingTubular Elements Under the Warming Pan
Wet or DryWet or Dry, Wet Recommended for Best Results
Drain1/2" NPT
CertificationsUL Recognized Component
Warranty1 Year Parts and Labor
Warranty Terms1 Year from Original Installation or 18 Months from Purchase, Whichever Comes First, Wells-Authorized Service Agency

Resources & Documents

Specs

Manufacturer Wells
Model Number HMP-6D
Series HMP6 / HSW6 Half-Size Warmers
Type Top-Mount Drop-In Half-Size Rectangular Hot Food Well, 6" x 20" Pan
Shipping Weight 11 lb.
Width 6-3/8 Inches
Depth 20-3/4 Inches
Height 7-9/16 Inches
Control Panel 3-5/16" W x 4-7/16" H
Clearances Back 1"Sides 2"Bottom 9"Front 2-5/8"
Capacity 1 Half-Size 6x20 Pan
Pan Options 1 Half-Size 6" x 20" Food Pan or Equivalent Fractional Inset Pans
Voltage 120 Volts
Phase 1
Wattage 750 W
Amps 6.25 Amps
Connection Hard-Wired, Power Cord Not Supplied
Control Type Thermostatic, Recessed Front PanelTemperature-Ready Indicator LightHigh Limit
Exterior Stainless Steel
Well Heavy-Gauge Deep-Drawn Stainless Steel PanOne-Piece Top Flange
Heating Tubular Elements Under the Warming Pan
Wet or Dry Wet or DryWet Recommended for Best Results
Drain 1/2" NPT
Certifications UL Recognized Component
Warranty 1 Year Parts and Labor
Warranty Terms 1 Year from Original Installation or 18 Months from Purchase, Whichever Comes FirstWells-Authorized Service Agency

Certifications

UL Recognized Component
Call

Description

A compact top-mount well that keeps one 6" x 20" half-size pan of hot food at serving temperature.

Wells HMP-6D 6 x 20 half-size drop-in hot food well with remote thermostat control

The Wells HMP-6D is a single-well, half-size warmer from the HMP6 series for top-mount installation. It holds one 6" x 20" pan or fractional insets with a 1/2-inch drain, controlled by a thermostat in a recessed front panel. It runs on 120V single phase at 750 W and is hard-wired.

Will it fit · Will it hook up

Outside size
6-3/8" W x 20-3/4" D x 7-9/16" H; control panel 3-5/16" W x 4-7/16" H
Fits
One 6" x 20" half-size food pan or equivalent fractional insets
Power
120V, single phase, 750 W, 6.25 A; hard-wired
Clearances
1" back, 2" sides, 9" below, 2-5/8" front
Drain
1/2" NPT drain

Measure the counter run: this half-size well is 6-3/8" wide and 20-3/4" front to back.

Half-size footprint

Holds one 6" x 20" half-size pan, so it fits short counter runs and tight spots where a full-size well will not.

Thermostatic control

A thermostat in a recessed front panel holds the set temperature; a ready light and high limit come standard.

Deep-drawn well

One-piece stainless top flange and heavy-gauge deep-drawn stainless pan with no seams to trap food.

Wet or dry

Run it with water for best results or dry, as the Wells sheet allows.

Built-in drain

A 1/2" NPT drain lets you empty the well for cleaning; Wells drain valve extension kit 20385 brings the handle to the counter front.

Delivery and setup

  • Inspect the carton for damage before you sign, and note any damage on the delivery receipt.
  • Have a licensed electrician hard-wire the unit to a circuit that matches the nameplate voltage and phase; Wells notes that installation must meet local electrical and plumbing codes.
  • Use the Wells installation instructions for the counter cutout and control panel cutout. Keep the bottom of the unit accessible for service.
  • Have a plumber connect the 1/2" NPT drain to a suitable drain line; some jurisdictions require an air gap.

Questions buyers ask

What pan does it hold?

One 6" x 20" half-size food pan or equivalent fractional insets, up to the depth of the well.

What power does it need?

120V single phase, 750 W, 6.25 amps. It is hard-wired; no cord is supplied.

How much room does it need?

The unit is 6-3/8" W x 20-3/4" D x 7-9/16" H. Wells lists minimum clearances of 1" back, 2" sides, 9" below and 2-5/8" in front.

How do I start it up for wet use?

Wells says to add about 1" of hot tap water before turning the warmer on, then preheat on the highest setting for about 30 minutes with the pan covered. Always hold food in an inset or pan, never directly in the well, and never add water to a dry, hot well.

What warranty does it have?

Wells lists a 1-year parts and labor warranty, from installation or 18 months from purchase, whichever comes first.

Half-Size PanOne 6" x 20" pan or insets.
120V 750WSingle phase, hard-wired.
ThermostatReady light and high limit.
1-Year WarrantyParts and labor per Wells.

Specs

Manufacturer Wells
Model Number HMP-6D
Series HMP6 / HSW6 Half-Size Warmers
Type Top-Mount Drop-In Half-Size Rectangular Hot Food Well, 6" x 20" Pan
Shipping Weight 11 lb.
Width 6-3/8 Inches
Depth 20-3/4 Inches
Height 7-9/16 Inches
Control Panel 3-5/16" W x 4-7/16" H
Clearances Back 1"Sides 2"Bottom 9"Front 2-5/8"
Capacity 1 Half-Size 6x20 Pan
Pan Options 1 Half-Size 6" x 20" Food Pan or Equivalent Fractional Inset Pans
Voltage 120 Volts
Phase 1
Wattage 750 W
Amps 6.25 Amps
Connection Hard-Wired, Power Cord Not Supplied
Control Type Thermostatic, Recessed Front PanelTemperature-Ready Indicator LightHigh Limit
Exterior Stainless Steel
Well Heavy-Gauge Deep-Drawn Stainless Steel PanOne-Piece Top Flange
Heating Tubular Elements Under the Warming Pan
Wet or Dry Wet or DryWet Recommended for Best Results
Drain 1/2" NPT
Certifications UL Recognized Component
Warranty 1 Year Parts and Labor
Warranty Terms 1 Year from Original Installation or 18 Months from Purchase, Whichever Comes FirstWells-Authorized Service Agency

Certifications

UL Recognized Component

Payment & Security

Apple Pay Diners Club Discover Google Pay Mastercard Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

What Our Customers Say

Related Products

Recently viewed