Wells HRCP-7400 Four-Pan Hot & Cold Drop-In Well, Dual Temperature NSF-7, Auto Water Fill, 208/240V Heat, 60-1/4" W
One drop-in well for 4 full-size 12" x 20" pans that works as a heated bain marie or a refrigerated cold pan at the flip of a switch.
The Wells HRCP-7400 is a dual temperature, self-contained drop-in unit: a wet electric bain marie for hot food and an NSF-7 refrigerated cold pan in one. A single control changes it from hot to cold. For hot use, an electric immersion heater warms a water bath that an automatic fill system keeps at the right level; for cold use, a 1/4 HP R-513A condensing unit and wrapped coils chill the well. Pans sit 3" below the top edge to meet NSF-7.
Plan a licensed electrician for the permanent 120/208-240V connection and a plumber for the water supply and drain before the unit arrives.
Two units in one: a heated bain marie or a refrigerated cold pan, changed with a single control.
A water sensor and solenoid valve keep the water level right, with high-limit protection. Designed for wet operation only.
An electric immersion heater, 3.8/5.0 kW at 208/240V, transfers heat straight to the water. A positive-off thermostat sets the temperature.
Pans recessed 3" below the top edge. A 1/4 HP air-cooled condensing unit with R-513A and wrapped coils on both sides and bottom does the cooling.
One-piece 18 gauge stainless steel top flange and coved-corner liner, CFC-free foamed-in-place insulation and a 1" center drain.
The temperature and function control panel sits on a 24" flexible conduit and can be mounted in the counter.
A single control changes the unit from a heated bain marie to a refrigerated cold pan.
Yes. All HRCP models have automatic water fill and need a water supply connection. Hot operation is wet only.
A single phase 3-wire 120/208-240V, 60 Hz supply, permanently connected. The heater draws 18.1/20.8 A at 208/240V (3.8/5.0 kW); the refrigeration draws 5 A at 115V.
4 full-size 12" x 20" pans, or fractional pans with adapter bars. Adapter bars for food pans are provided.
59" left to right by 25-7/8" front to back.
Wells lists a limited 1-year parts and labor warranty. A 2nd year parts and labor warranty and a 5-year compressor warranty are offered as options.
Specs
| Manufacturer | Wells |
|---|---|
| Model Number | HRCP-7400 |
| Type | Dual Temperature Hot and Refrigerated Drop-In Well, Four-Pan |
| Shipping Weight | 275 lb. |
| Installed Weight | 240 lb. |
| Carton Size | 29" x 62" x 32" W x D x H |
| Width | 60-1/4 Inches |
| Depth | 27-1/8 Inches |
| Height | 25-1/8 Inches |
| Interior | 55" Left to Right x 21-7/8" Front to Back |
| Cutout | 59" Left to Right x 25-7/8" Front to Back |
| Capacity | 4 Full-Size 12 x 20 Inch Pans |
| Pan Recess | 3" Below Top Edge, NSF-7 |
| Voltage | 120/208-240 Volts |
| Supply | Single Phase 3-Wire, 60 Hz, Permanently Connected |
| Heater | 208/240V, 3.8/5.0 kW, 18.1/20.8 A |
| Refrigeration Load | 115V, 5 A |
| Heating System | Electric Immersion Heater in Water BathPositive-Off ThermostatWet Operation Only |
| Water Fill | Automatic, Water Sensor and Solenoid Valve, High-Limit Protection |
| Refrigerant | R-513A |
| Compressor | 1/4 HP |
| System | Air Cooled, Wrapped Coils on Sides and BottomSight Glass, Service Valves, Filter/Dryer, Receiver |
| Control Type | Single Hot/Cold ControlPanel on 24" Flexible Conduit for Optional Counter Mounting |
| Connections | Water Supply for Auto Fill1" Center Drain |
| Top and Liner | 18 Gauge Stainless Steel, One-Piece Top Flange, Coved Corners |
| Insulation | CFC-Free Foamed-in-Place |
| Included | Adapter Bars for Food PansPan Support Rails, 4 Separate Pieces |
| Options | Perforated Bottom Strainer PlateAdapter Bars for Fractional PansRemote Models without Compressor2nd Year Parts and Labor Warranty5-Year Compressor Warranty |
| Certifications | NSF, cULus |
| Made In | USA |
| Warranty | 1 Year Parts and Labor |
Certifications
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
