Wells HT-400AF Bain Marie Drop-In Heated Tank, Holds (4) 12" x 20" Pans, Auto-Fill, Thermostat, 208/240V
A single open heated tank that holds four 12" x 20" pans or round insets at serving temperature.
The Wells HT-400AF is a top-mount, bain marie style drop-in from the HT series with one 53-3/4" x 19-7/8" opening. It is designed for wet operation, with a positive-off thermostat, fully insulated tank and a 1" drain with ball valve as standard. An automatic water fill keeps the level up through service. It runs on 208/240V 3-phase, field convertible to single phase, and is hard-wired.
Measure the counter run: the flange is 57-1/2" wide and 23-5/8" deep.
A single 53-3/4" x 19-7/8" opening takes four 12" x 20" pans, fractional pans or round insets on adapter tops, so you can change the line-up without changing wells.
A solenoid valve on a 1/4" water line fills the tank automatically to keep the water level up, with a backflow preventer built into the fill line.
An adjustable thermostat with a ready light sits in a recessed one-piece panel that helps prevent accidental adjustments.
Sides, front, back and bottom are insulated for faster preheat, faster recovery and lower energy use; Wells says it suits non-metal counters.
Every HT tank has a 1" NPT drain with a ball valve for quick emptying at closing.
It ships wired for 3-phase and can be converted to single phase in the field to match your panel.
The single opening is 53-3/4" x 19-7/8". It holds four 12" x 20" pans, or fractional and round insets with adapter tops (Wells adapter bar ADTBAR-HT).
208/240V. It draws 3600 W at 208V and 4800 W at 240V. It ships 3-phase and is field convertible to single phase; single-phase draw is 17.3 A at 208V and 20.0 A at 240V. It is hard-wired.
No. Wells designs the HT bain marie tanks for wet operation only. The auto-fill keeps the water level for you.
A 1/4" NPT water line to the solenoid valve in the outlet box, at no more than 120 psi and 120°F. A backflow preventer is built in; local code may require an extra vacuum breaker, not supplied by Wells.
Wells lists a 56-1/2" x 22-7/8" top cutout and 6-3/4" clearance below the tank, 1" at the back and sides and 4-1/8" in front.
Wells lists a 1-year parts and labor warranty, from installation or 18 months from purchase, whichever comes first.
Specs
| Manufacturer | Wells |
|---|---|
| Model Number | HT-400AF |
| Series | HT Bain Marie Style Warmers |
| Type | Bain Marie Style Drop-In Heated Tank, Top-Mount |
| Shipping Weight | 98 lb. |
| Width | 57-1/2 Inches |
| Depth | 23-5/8 Inches |
| Height | 9-3/4 Inches |
| Opening | 53-3/4" x 19-7/8" Single Opening |
| Top Cutout | 56-1/2" x 22-7/8" |
| Clearances | Back 1"Sides 1"Bottom 6-3/4"Front 4-1/8" |
| Capacity | 4 Full-Size 12 x 20 Pans |
| Pan Options | 4 12" x 20" PansRound or Rectangular Insets with Adapter Tops |
| Voltage | 208/240 Volts |
| Phase | 3, Field Convertible to 1 |
| Wattage | 3600 W at 208V4800 W at 240V |
| Amps | 17.3 / 20.0 Amps |
| Amps Per Line, 3-Phase | 208V L1/L2/L3 8.7/15.0/8.7 A240V 10.0/17.3/10.0 ASingle-Phase Figures in Amps Row |
| Field Wiring | 10 AWG Cu, 90°C, single phase |
| Connection | Hard-Wired, Power Cord Not Supplied |
| Control Type | Positive-Off ThermostatTemperature-Ready LightHigh LimitControl Panel on Flexible Conduit |
| Exterior | Stainless Steel |
| Tank | Heavy-Gauge Deep-Drawn Stainless SteelOne-Piece Top FlangeWellslok Mounting |
| Insulation | Fully Insulated Sides, Front, Back and Bottom |
| Wet or Dry | Wet Operation Only |
| Drain | 1" NPT with Ball Valve |
| Water Fill | 1/4" NPTSolenoid ValveMax 120 psi and 120°FBackflow Preventer Built In |
| Certifications | cULus |
| Warranty | 1 Year Parts and Labor |
| Warranty Terms | 1 Year from Original Installation or 18 Months from Purchase, Whichever Comes FirstWells-Authorized Service Agency |
Certifications
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
