Wells HT-500 Bain Marie Drop-In Heated Tank, Holds (5) 12" x 20" Pans, Thermostat, 208/240V
A single open heated tank that holds five 12" x 20" pans or round insets at serving temperature.
The Wells HT-500 is a top-mount, bain marie style drop-in from the HT series with one 67-3/4" x 19-7/8" opening. It is designed for wet operation, with a positive-off thermostat, fully insulated tank and a 1" drain with ball valve as standard. It runs on 208/240V 3-phase, field convertible to single phase, and is hard-wired.
Measure the counter run: the flange is 71-1/2" wide and 23-5/8" deep.
A single 67-3/4" x 19-7/8" opening takes five 12" x 20" pans, fractional pans or round insets on adapter tops, so you can change the line-up without changing wells.
An adjustable thermostat with a ready light sits in a recessed one-piece panel that helps prevent accidental adjustments.
Sides, front, back and bottom are insulated for faster preheat, faster recovery and lower energy use; Wells says it suits non-metal counters.
Every HT tank has a 1" NPT drain with a ball valve for quick emptying at closing.
It ships wired for 3-phase and can be converted to single phase in the field to match your panel.
The single opening is 67-3/4" x 19-7/8". It holds five 12" x 20" pans, or fractional and round insets with adapter tops (Wells adapter bar ADTBAR-HT).
208/240V. It draws 4500 W at 208V and 6000 W at 240V. It ships 3-phase and is field convertible to single phase; single-phase draw is 21.7 A at 208V and 25.0 A at 240V. It is hard-wired.
No. Wells designs the HT bain marie tanks for wet operation only. Check the water level often and add hot water as needed.
Wells says to add about 1" of hot tap water before turning the tank on, then preheat for about 30 minutes before setting the control. Always hold food in an inset or pan, never directly in the tank.
Wells lists a 70-1/2" x 22-1/2" top cutout and 6-3/4" clearance below the tank, 1" at the back and sides and 4-1/8" in front.
Wells lists a 1-year parts and labor warranty, from installation or 18 months from purchase, whichever comes first.
Specs
| Manufacturer | Wells |
|---|---|
| Model Number | HT-500 |
| Series | HT Bain Marie Style Warmers |
| Type | Bain Marie Style Drop-In Heated Tank, Top-Mount |
| Shipping Weight | 115 lb. |
| Width | 71-1/2 Inches |
| Depth | 23-5/8 Inches |
| Height | 9-3/4 Inches |
| Opening | 67-3/4" x 19-7/8" Single Opening |
| Top Cutout | 70-1/2" x 22-1/2" |
| Clearances | Back 1"Sides 1"Bottom 6-3/4"Front 4-1/8" |
| Capacity | 5 Full-Size 12 x 20 Pans |
| Pan Options | 5 12" x 20" PansRound or Rectangular Insets with Adapter Tops |
| Voltage | 208/240 Volts |
| Phase | 3, Field Convertible to 1 |
| Wattage | 4500 W at 208V6000 W at 240V |
| Amps | 21.7 / 25.0 Amps |
| Amps Per Line, 3-Phase | 208V L1/L2/L3 13.0/18.7/8.7 A240V 15.0/21.7/10.0 ASingle-Phase Figures in Amps Row |
| Field Wiring | 10 AWG Cu, 90°C, single phase |
| Connection | Hard-Wired, Power Cord Not Supplied |
| Control Type | Positive-Off ThermostatTemperature-Ready LightHigh LimitControl Panel on Flexible Conduit |
| Exterior | Stainless Steel |
| Tank | Heavy-Gauge Deep-Drawn Stainless SteelOne-Piece Top FlangeWellslok Mounting |
| Insulation | Fully Insulated Sides, Front, Back and Bottom |
| Wet or Dry | Wet Operation Only |
| Drain | 1" NPT with Ball Valve |
| Certifications | cULus |
| Warranty | 1 Year Parts and Labor |
| Warranty Terms | 1 Year from Original Installation or 18 Months from Purchase, Whichever Comes FirstWells-Authorized Service Agency |
Certifications
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
