Wells MDW200 Waterless Drop-In Dry Well Hot Food Warmer, 2 Full-Size Pans, Infinite Controls, 208/240V 1-Phase
A waterless drop-in hot food well that holds 2 full-size pans hot with no water, plumbing or drain.
The Wells MDW200 is a two-well modular dry well for top-mount installation. Tubular heating elements and a stainless steel fan heat each well without water, so there is no fill, no drain and no scale to clean. Each well holds one full-size steam table pan up to 6" deep or fractional pans, with its own infinite control knob and a built-in high limit. It runs on 208/240V single phase, field convertible to 3-phase, and is hard-wired.
Check the front wall: Wells wants 6" of clearance in front of the 14.1" wide control box.
Tubular elements and a stainless fan heat each well dry, so there is no water to fill, no plumbing, no drain and no scale.
Wells rates the dry wells at 33% less power than its standard MOD units: 0.61 kW per well at 208V, 0.8 kW at 240V.
Each of the 2 wells holds one full-size steam table pan up to 6" deep or fractional pans.
Each well has its own infinite control knob, so you can run sections at different heats.
The dry design gives full top-side access to components after installation.
No. The MDW is a waterless dry well. It heats with tubular elements and a stainless fan, so there is no water line, no fill and no drain.
Each well holds one full-size steam table pan up to 6" deep, or equivalent fractional pans. Wells adapter tops (20176, 20434, 21615, 21621, 21624) take round insets.
208/240V, single phase, field convertible to 3-phase. It uses 0.61 kW per well at 208V and 0.8 kW per well at 240V, 1.22 kW or 1.6 kW total. Amps: 208V 5.9 A; 240V 6.7 A. It is hard-wired.
The included Wellslok system fastens to metal counters up to 0.25" thick. For wood and plastic counters Wells offers an extension kit.
Wells lists 6" to the front wall, 1" to the back and side walls and 6.75" to any surface below. If you store items underneath, Wells recommends a baffle 8.5" below the unit.
Wells lists a 1-year parts and labor warranty on the MDW dry wells.
Specs
| Manufacturer | Wells |
|---|---|
| Model Number | MDW200 |
| Series | MDW Modular Dry Well |
| Type | Waterless Top-Mount Drop-In Hot Food Well, Two Wells |
| Shipping Weight | 63 lb. |
| Unit Weight | 55 lb. |
| Width | 29.5 Inches |
| Depth | 20 Inches |
| Height | 11.9 Inches |
| Height Note | 11.9" Below Counter Surface |
| Bottom Width | 27.6" |
| Control Box Width | 14.1" |
| Clearances | Front 6"Back 1"Sides 1"Bottom 6.75" |
| Capacity | 2 Full-Size Steam Table Pans |
| Pan Options | 1 Full-Size Pan up to 6" Deep per Well or Equivalent Fractional PansRound Insets with Adapter Tops |
| Voltage | 208/240 Volts |
| Phase | 1, Field Convertible to 3 |
| Power | 0.61 kW per Well at 208V0.8 kW per Well at 240VTotal 1.22 kW at 208V, 1.6 kW at 240V |
| Amps | 208V 5.9 A240V 6.7 A |
| Connection | Hard-Wired |
| Control Type | Infinite, One Knob per Well, Factory-AttachedHigh Limit |
| Exterior | Type 430 Stainless Steel |
| Insulation | Front, Back, Sides and Bottom |
| Heating | Tubular Heating Elements with Stainless Steel Fan |
| Mounting | Top-MountWellslok for Metal Counters up to 0.25" Thick |
| Wet or Dry | Dry Only, No Water or Drain |
| Certifications | cULus Listed, UL EPH Classified, Made in USA |
| Warranty | 1 Year Parts and Labor |
| Warranty Terms | 1 Year from Original Installation or 18 Months from Purchase, Whichever Comes FirstWells-Authorized Service Agency |
Certifications
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
