Wells MOD-200 Two-Well Drop-In Hot Food Well, (2) 12" x 20" Pans, Top-Mount, Infinite Controls, Insulated, 208/240V
A fully insulated two-well drop-in that holds two 12" x 20" pans of hot food, each well on its own control.
The Wells MOD-200 is a heavy-duty, two-well modular warmer for top-mount installation. Each 12" x 20" well has a deep-drawn stainless warming pan, full insulation and its own infinite control. It runs on 208/240V at 900/1200 W per well and is hard-wired.
Measure the counter run: the flange is 29-1/2" wide and 23-5/8" deep.
Two 12" x 20" wells, each with its own control, hold two pans or a mix of fractional pans at different settings.
Insulation on the sides, front, back and bottom gives quicker preheat and faster recovery, and suits non-metal counters.
An infinite control per well sets the heat level; ready lights and high limits are standard.
Wellslok ears clamp the flange to the countertop from below for quick installation.
Two 12" x 20" standard pans or equivalent fractional pans, one per well. Wells adapter tops take round insets.
Wells lists a 28-1/2" x 22-1/2" top cutout and a 12-7/8" x 3-1/8" front apron cutout for the control panel, with 6-3/4" clearance below.
208/240V single phase: 1800 W and 8.7 A at 208V, 2400 W and 10.0 A at 240V total. It is hard-wired; Wells offers cords and plugs on thermostatic models only.
Yes. Wells rates the MOD warmers for wet or dry use and recommends wet for best results.
Wells says to add about 1" of hot tap water before turning the warmer on, then preheat on the highest setting for about 30 minutes with the pan covered. Always hold food in an inset or pan, never directly in the well, and never add water to a dry, hot well.
Wells lists a 1-year parts and labor warranty, from installation or 18 months from purchase, whichever comes first.
Specs
| Manufacturer | Wells |
|---|---|
| Model Number | MOD-200 |
| Series | MOD200 Modular Warmers |
| Type | Top-Mount Drop-In Two-Well Rectangular Hot Food Well, 12 x 20 |
| Shipping Weight | 51 lb. |
| Width | 29-1/2 Inches |
| Depth | 23-5/8 Inches |
| Height | 9-3/4 Inches |
| Control Panel | 14" W x 6-1/4" H |
| Top Cutout | 28-1/2" x 22-1/2" |
| Front Panel Cutout | 12-7/8" x 3-1/8" |
| Clearances | Back 1"Sides 1"Bottom 6-3/4"Front 4-1/8" |
| Capacity | 2 Full-Size 12 x 20 Pans |
| Pan Options | Two 12" x 20" Standard Pans or Equivalent Fractional Pans, One per Well |
| Voltage | 208/240 Volts |
| Phase | 1 |
| Wattage | 900/1200 W per Well1800 W Total at 208V, 2400 W at 240V |
| Amps | 8.7 / 10.0 Amps |
| Field Wiring | 12 AWG Cu, 75°C |
| Connection | Hard-Wired |
| Control Type | Infinite, One per WellTemperature-Ready Indicator LightsHigh Limits |
| Exterior | Stainless Steel |
| Warming Pans | Heavy-Gauge Deep-Drawn Stainless Steel PansOne-Piece Top FlangeWellslok Mounting |
| Insulation | Fully Insulated Sides, Front, Back and Bottom |
| Heating | Tubular Elements Under Each Warming Pan |
| Wet or Dry | Wet or DryWet Recommended for Best Results |
| Drain | No Drain |
| Certifications | NSF, UL |
| Warranty | 1 Year Parts and Labor |
| Warranty Terms | 1 Year from Original Installation or 18 Months from Purchase, Whichever Comes FirstWells-Authorized Service Agency |
Certifications
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
