Wells MOD-327TDM/AF Extra-Deep Three-Well Drop-In Hot Food Well, 12" x 27" Pans, Thermostatic, Drain Manifold, Auto-Fill, 208/240V
A three-well drop-in warmer that holds hot food at serving temperature in 3 extra-deep 12" x 27" wells, each taking four 1/3-size pans, with automatic water fill.
The Wells MOD-327TDM/AF is a heavy-duty, top-mount modular food warmer for a serving line, buffet or cafeteria counter. Its three extra-deep, deep-drawn stainless steel wells each hold four 1/3-size pans or equivalent fractional pans. Each well has its own thermostatic control, and the unit has drains joined by a manifold with a 1" valve. An auto water-fill system keeps the water at the right level, so it needs a water line. It runs on 208V or 240V and ships wired 3-phase and can be converted to 1-phase in the field.
The 43-1/2" width and 30-9/16" front-to-back depth set the counter run. Lay out the cutout from the Wells installation sheet before cutting.
Each well has its own thermostatic control and a temperature-ready light. High-limits prevent overheating; thermostatic controls sit recessed in a drawn, front-mounted panel.
The three 12" x 27" wells each hold four 1/3-size pans or equivalent fractional pans. Run them wet or dry; Wells recommends wet.
Sides, front, back and bottom are insulated for faster preheat and recovery. Wells rates the fully insulated MODs for non-metal counters.
The one-piece stainless steel top flange seats on a gasket, and Wellslok clamps tighten it to the counter from below with a screwdriver.
Tubular elements under each well spread the heat evenly: 1240/1650 W per well at 208/240V.
A solenoid fill valve keeps the water at the right level, with a backflow preventer built in.
Each of the three extra-deep 12" x 27" wells takes four 1/3-size pans or equivalent fractional pans. Pans are not part of this listing.
208V or 240V, hard-wired. It draws 3,720 W at 208V and 4,950 W at 240V: 17.9 A at 208V or 20.6 A at 240V on single phase, or 10.3 A per line at 208V and 11.9 A per line at 240V on 3-phase.
Yes. Wells rates it for wet or dry operation, and recommends wet operation for best results.
Wells says the fully insulated MODs suit non-metal counters, and offers Wellslok extension kits for wood counter installations.
Yes. Auto-fill models need a water connection: a 1/4" NPT supply to the fill solenoid, at up to 120 psi and 120°F.
The Wells sheet lists NSF and UL approval for this model.
Wells lists a 1-year limited parts and labor warranty, serviced by a Wells-authorized agency.
Specs
| Manufacturer | Wells |
|---|---|
| Model Number | MOD-327TDM/AF |
| Wells Catalog Code | MOD327TDMAF |
| Type | Top-Mount Drop-In Modular Food Warmer, Three Well, Extra Deep |
| Shipping Weight | 90 lb. |
| Width | 43-1/2 Inches |
| Depth | 30-9/16 Inches |
| Height | 9-3/4 Inches |
| Top Cutout | 42-3/4" x 29-1/2" |
| Control Panel | 35" W x 6-1/4" H |
| Minimum Clearances | Back 1"Sides 1"Bottom 6-3/4"Front 4-1/8" |
| Capacity | 3 Wells, 4 x 1/3 Size Pans Each |
| Well Size | 12" x 27" |
| Voltage | 208/240 Volts |
| Phase | 3 Phase as ShippedField Convertible to 1 Phase |
| Watts per Well | 1240/1650 W at 208/240V |
| Total Watts | 3,720 W at 208V4,950 W at 240V |
| Amps | 17.9 at 208V, 20.6 at 240V, 1 Phase |
| 3-Phase Amps per Line | 208V: 10.3240V: 11.9 |
| Power Cord | No Cord, Hard-Wired |
| Control Type | Thermostatic, One per Well |
| Indicators | Temperature-Ready LightsHigh-Limit Protection |
| Wet or Dry | Wet or Dry, Wet Recommended |
| Drain | Drains with Manifold1" NPT Valve Supplied |
| Water Fill | Automatic1/4" NPT SupplyMax 120 psi, 120°F |
| Top Flange | One-Piece Stainless Steel |
| Wells | Heavy-Gauge Deep-Drawn Stainless Steel |
| Insulation | Fully Insulated Sides, Front, Back and Bottom |
| Mounting | Top-Mount Drop-In with Wellslok |
| Certifications | NSF, UL |
| Warranty | 1-Year Limited Parts and Labor |
Certifications
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
