Wells MOD-500D Five-Well Drop-In Hot Food Well, 12" x 20" Pans, Infinite Controls, Drains, 208/240V

Wells MOD-500D Five-Well Drop-In Hot Food Well, 12" x 20" Pans, Infinite Controls, Drains, 208/240V

WellsSKU: WLS-MOD-500D

Price:
Regular price$6,926.00
  • Warranty · 1-Year Limited Parts and Labor

Secure checkout

Apple Pay Diners ClubDiscoverGoogle Pay Mastercard Shop Pay Visa

Talk to an equipment specialist

Mon–Sat 8 AM–5 PM ET

Questions about size, power, delivery or a quote for several units?

Call

Will it fit · Will it plug in

Outside (W × D × H)71‑1/2" × 23‑5/8" × 9‑3/4"
Power208/240V · 21.6 at 208V, 25 at 240V, 1 Phase
Capacity5 Full-Size 12 x 20 Pans
Shipping weight116 lb.
ListedNSF, UL

Highlights

  • 5 wells for 12" x 20" full-size or fractional pans
  • 71-1/2" W x 23-5/8" D x 9-3/4" H overall; 70-1/2" x 22-1/2" counter cutout
  • Infinite control for each well with temperature-ready lights and high-limits
  • 208/240V, 900/1200 W per well, ships 3-phase, field convertible to 1-phase, hard-wired
  • Drain in each well
  • Fully insulated, one-piece stainless steel top flange, Wellslok mounting
  • NSF and UL listed; 1-year limited parts and labor warranty

Specifications

ManufacturerWells
Model NumberMOD-500D
Wells Catalog CodeMOD500D
TypeTop-Mount Drop-In Modular Food Warmer, Five Well
Shipping Weight116 lb.
Width71-1/2"
Depth23-5/8"
Height9-3/4"
Top Cutout70-1/2" x 22-1/2"
Control Panel18" W x 6-1/4" H
Minimum ClearancesBack 1", Sides 1", Bottom 6-3/4", Front 6"
Capacity5 Full-Size 12 x 20 Pans
Well Size12" x 20"
Voltage208/240V
Phase3 Phase as Shipped, Field Convertible to 1 Phase
Watts per Well900/1200 W at 208/240V
Total Watts4,500 W at 208V, 6,000 W at 240V
Amps21.6 at 208V, 25 at 240V, 1 Phase
3-Phase Amps per Line208V: 15.0 / 11.2 / 11.2, 240V: 17.0 / 13.0 / 13.0
Power CordNo Cord, Hard-Wired
Control TypeInfinite, One per Well
IndicatorsTemperature-Ready Lights, High-Limit Protection
Wet or DryWet or Dry, Wet Recommended
DrainIndividual Drain per Well, 1/2" Female NPT
Top FlangeOne-Piece Stainless Steel
WellsHeavy-Gauge Deep-Drawn Stainless Steel
InsulationFully Insulated Sides, Front, Back and Bottom
MountingTop-Mount Drop-In with Wellslok
CertificationsNSF, UL
Warranty1-Year Limited Parts and Labor

Resources & Documents

Specs

Manufacturer Wells
Model Number MOD-500D
Wells Catalog Code MOD500D
Type Top-Mount Drop-In Modular Food Warmer, Five Well
Shipping Weight 116 lb.
Width 71-1/2 Inches
Depth 23-5/8 Inches
Height 9-3/4 Inches
Top Cutout 70-1/2" x 22-1/2"
Control Panel 18" W x 6-1/4" H
Minimum Clearances Back 1"Sides 1"Bottom 6-3/4"Front 6"
Capacity 5 Full-Size 12 x 20 Pans
Well Size 12" x 20"
Voltage 208/240 Volts
Phase 3 Phase as ShippedField Convertible to 1 Phase
Watts per Well 900/1200 W at 208/240V
Total Watts 4,500 W at 208V6,000 W at 240V
Amps 21.6 at 208V, 25 at 240V, 1 Phase
3-Phase Amps per Line 208V: 15.0 / 11.2 / 11.2240V: 17.0 / 13.0 / 13.0
Power Cord No Cord, Hard-Wired
Control Type Infinite, One per Well
Indicators Temperature-Ready LightsHigh-Limit Protection
Wet or Dry Wet or Dry, Wet Recommended
Drain Individual Drain per Well, 1/2" Female NPT
Top Flange One-Piece Stainless Steel
Wells Heavy-Gauge Deep-Drawn Stainless Steel
Insulation Fully Insulated Sides, Front, Back and Bottom
Mounting Top-Mount Drop-In with Wellslok
Certifications NSF, UL
Warranty 1-Year Limited Parts and Labor

Certifications

NSF
UL
Call

Description

A five-well drop-in warmer that holds hot food at serving temperature in 5 full-size 12" x 20" pans.

Wells five-well drop-in hot food well with drain line and five-knob control panel, front view

The Wells MOD-500D is a heavy-duty, top-mount modular food warmer for a serving line, buffet or cafeteria counter. Its five deep-drawn stainless steel wells take 12" x 20" standard pans or equivalent fractional pans. Each well has its own infinite control, and the unit has a 1/2" drain in each well. It runs on 208V or 240V and ships wired 3-phase and can be converted to 1-phase in the field.

Will it fit · Will it hook up

Outside size
71-1/2" W x 23-5/8" D x 9-3/4" H overall
Counter cutout
70-1/2" x 22-1/2" top cutout; control panel mounts in a front apron cutout
Control panel
18" W x 6-1/4" H, front-mounted
Clearances
1" back and sides, 6-3/4" below, 6" front
Power
208/240V hard-wired, no cord; 4,500 W at 208V, 6,000 W at 240V; 21.6 A at 208V, 25 A at 240V single phase
Drains
Individual 1/2" female NPT drain on each well

The 71-1/2" width and 23-5/8" front-to-back depth set the counter run. Lay out the cutout from the Wells installation sheet before cutting.

Separate well controls

Each well has its own infinite control and a temperature-ready light. High-limits prevent overheating.

Full-size pan wells

The five 12" x 20" wells take standard pans or equivalent fractional pans. Run them wet or dry; Wells recommends wet.

Fully insulated body

Sides, front, back and bottom are insulated for faster preheat and recovery. Wells rates the fully insulated MODs for non-metal counters.

Wellslok mounting

The one-piece stainless steel top flange seats on a gasket, and Wellslok clamps tighten it to the counter from below with a screwdriver.

Tubular heating elements

Tubular elements under each well spread the heat evenly: 900/1200 W per well at 208/240V.

Drain in each well

Each well has its own 1/2" female NPT drain for easier emptying and cleaning.

Delivery and setup

  • Inspect the crate for damage before you sign, and note any damage on the delivery receipt.
  • Installation is by a qualified electrician and plumber. Power leads come through the conduit knockout to the terminal block in the master control panel; check the nameplate for voltage and phase.
  • Wells ships it wired for 3-phase power. It can be converted to single phase in the field; tell your electrician which supply you have.
  • Leave the unit reachable from below for service. Wells recommends a baffle 8-1/2" below the unit if you store items underneath.
  • Pans, inset lids, ladles, drain screens, adaptor tops for round insets, Wellslok extension kits for wood counters and 72" wiring are Wells options, not part of this listing.

Questions buyers ask

What pans fit?

Each of the five wells takes a 12" x 20" standard pan or equivalent fractional pans. Pans are not part of this listing.

What power does it need?

208V or 240V, hard-wired. It draws 4,500 W at 208V and 6,000 W at 240V: 21.6 A at 208V or 25 A at 240V on single phase, or 15.0 / 11.2 / 11.2 A per line at 208V and 17.0 / 13.0 / 13.0 A per line at 240V on 3-phase.

Can it run dry?

Yes. Wells rates it for wet or dry operation, and recommends wet operation for best results.

Can it go in a wood or non-metal counter?

Wells says the fully insulated MODs suit non-metal counters, and offers Wellslok extension kits for wood counter installations.

How do I drain it?

Each well has a 1/2" female NPT drain. Pipe them to a suitable drain line.

What certifications does it have?

The Wells sheet lists NSF and UL approval for this model.

What warranty does it have?

Wells lists a 1-year limited parts and labor warranty, serviced by a Wells-authorized agency.

5 Wells 12" x 20"Full-size or fractional pans.
208/240VShips 3-phase, converts to 1-phase.
Infinite ControlsSeparate control for each well.
NSF and UL1-year parts and labor warranty.

Specs

Manufacturer Wells
Model Number MOD-500D
Wells Catalog Code MOD500D
Type Top-Mount Drop-In Modular Food Warmer, Five Well
Shipping Weight 116 lb.
Width 71-1/2 Inches
Depth 23-5/8 Inches
Height 9-3/4 Inches
Top Cutout 70-1/2" x 22-1/2"
Control Panel 18" W x 6-1/4" H
Minimum Clearances Back 1"Sides 1"Bottom 6-3/4"Front 6"
Capacity 5 Full-Size 12 x 20 Pans
Well Size 12" x 20"
Voltage 208/240 Volts
Phase 3 Phase as ShippedField Convertible to 1 Phase
Watts per Well 900/1200 W at 208/240V
Total Watts 4,500 W at 208V6,000 W at 240V
Amps 21.6 at 208V, 25 at 240V, 1 Phase
3-Phase Amps per Line 208V: 15.0 / 11.2 / 11.2240V: 17.0 / 13.0 / 13.0
Power Cord No Cord, Hard-Wired
Control Type Infinite, One per Well
Indicators Temperature-Ready LightsHigh-Limit Protection
Wet or Dry Wet or Dry, Wet Recommended
Drain Individual Drain per Well, 1/2" Female NPT
Top Flange One-Piece Stainless Steel
Wells Heavy-Gauge Deep-Drawn Stainless Steel
Insulation Fully Insulated Sides, Front, Back and Bottom
Mounting Top-Mount Drop-In with Wellslok
Certifications NSF, UL
Warranty 1-Year Limited Parts and Labor

Certifications

NSF
UL

Payment & Security

Apple Pay Diners Club Discover Google Pay Mastercard Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

What Our Customers Say

Related Products

Recently viewed