Wells RWN-16 Narrow Built-In Drawer Warmer, One Drawer, 120V or 208/240V
A space-saving narrow 1-drawer built-in warmer that keeps rolls, potatoes and sides hot and ready to serve.
The Wells RWN-16 is a built-in narrow drawer warmer with one drawer. Each drawer takes a standard 12" x 20" pan up to 6" deep, comes with a stainless steel pan, and has its own thermostat (90°F to 210°F) and humidity vent, so you can hold food crisp or moist. Self-latching drawers run on stainless steel tracks and bearings. It slides into a 19-1/8" x 9-7/8" counter opening and is hardwired to 120V or 208/240V.
Have your counter fabricator work from the Wells installation sheet: rails and rear support are built on site.
The drawer thermostat sets 90°F to 210°F.
An adjustable front vent on each drawer controls moisture.
Drawers accept standard 12" x 20" pans up to 6" deep while the narrow cabinet saves space; a stainless pan comes with each drawer.
Stainless steel tracks and bearings keep the drawers running smoothly.
The cabinet is fully insulated for efficiency. Preheat to 175°F takes about 15 minutes at 120V or 240V.
An exclusive self-latching mechanism closes each drawer securely with one touch.
Breads, rolls and other hot foods; Wells puts a typical load at about 8 dozen dinner rolls per drawer. Each drawer has its own temperature and moisture setting.
Cut 19-1/8" W x 9-7/8" H in the counter front panel. Build rails 15" apart (outside), flush with the bottom of the cutout, and a rear support. The unit body is 26-1/2" deep.
120V or 208/240V, single phase, chosen in the voltage menu. It draws 3.8 A (450 W) at 120V or 1.6/1.9 A (338/450 W) at 208/240V. It is hardwired.
The thermostat on each drawer sets 90°F to 210°F. Preheat to 175°F takes about 15 minutes at 120V or 240V and 22 minutes at 208V.
Wells gives NSF approval for potentially hazardous foods only to the T models, which have a built-in thermometer. This model has no thermometer.
Wells covers it for one year, parts and labor, against defects in material and workmanship. Repairs must be done by a Wells authorized service agency.
Specs
| Manufacturer | Wells |
|---|---|
| Model Number | RWN-16 |
| Type | Built-In Narrow Drawer Warmer |
| Drawers | 1, Individual Thermostat per Drawer |
| Capacity | 1 x 12" x 20" Pan up to 6" Deep |
| Pans Included | 1 Stainless Steel Pan, One per Drawer |
| Typical Load | About 8 Dozen Dinner Rolls per Drawer |
| Temperature Range | 90°F to 210°F |
| Preheat to 175°F | 15 Minutes at 120V or 240V22 Minutes at 208V |
| Installed Weight | 51 lb. |
| Shipping Weight | 63 lb. |
| Width | 20.25 Inches |
| Depth | 26.5 Inches |
| Height | 10.88 Inches |
| Front Panel Cutout | 19-1/8" W x 9-7/8" H |
| Support | Field-Fabricated Rails 15" Apart Outside, Flush with Cutout BottomRear Support |
| Field Wiring | 6" Pigtail14 AWG Copper, 90°C |
| Voltage | 120 or 208/240 Volts |
| Phase | 1 |
| Watts | 450 W at 120V338/450 W at 208/240V |
| Amps | 3.8 A at 120V1.6/1.9 A at 208/240V |
| Plug Type | No Plug, Hardwired |
| Drawers and Slides | Stainless Steel Tracks and BearingsSelf-Latching Drawers |
| Insulation | Fully Insulated |
| Control Type | Thermostatic, One Dial per DrawerAdjustable Front Humidity Vent |
| Accessories | Humitrol Rack 20624Replacement Pan 22228 |
| Certifications | UL Listed, NSF Std 4 |
| Potentially Hazardous Foods | NSF Approval Only on T Models with Built-In Thermometer |
| Warranty | 1 Year Parts and Labor |
Certifications
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
