Wells SS-206D 12" x 20" Top-Mount Rectangular Drop-In Food Warmer, Infinite Control, Drain, 208/240V
Description
A single-well 12 x 20 inch drop-in warmer that holds a full-size pan of hot food at safe serving temperatures.
The Wells SS206D is a heavy-duty top-mount rectangular food warmer. It holds one 12" x 20" full-size pan or equivalent fractional pans. A one-piece stainless steel top flange and a heavy-gauge, deep-drawn stainless steel pan are heated by a tubular element underneath. An infinite switch control sets the heat, and a light shows when it is on. A high limit prevents overheating. It is hard-wired to 208/240V single phase and has a 1/2" NPT drain.
Will it fit · Will it hook up
- Overall size
- 13-11/16" W x 21-3/4" front to back x 8-11/16" H
- Mounting
- Drops in from above; the flange rests on the counter and Wellsloks clamp it from below
- Pan opening
- 12" x 20" for one full-size pan
- Power
- 208/240V, single phase, 900/1200 W, 4.3/5.0 A; hard-wired
- Control panel
- 3-5/16" W x 4-7/16" H
- Drain
- 1/2" NPT
- Clearances
- 2" back, 2" sides, 6-3/4" below, 4-1/8" front
Wells does not print the counter cutout on the spec sheet; lay it out from the Wells install sheet that ships with the unit.
Full-size 12 x 20 well
Holds one 12" x 20" full-size pan or equivalent fractional pans. Wells recommends wet operation for best results, but it can run wet or dry.
Infinite switch control
An infinite switch sets the heat, and an indicator light shows when it is on. A high limit prevents overheating.
Deep-drawn stainless pan
A one-piece stainless steel top flange and heavy-gauge, deep-drawn stainless steel warming pan form the well.
Tubular heating element
A powerful tubular element under the pan heats quickly and spreads heat evenly.
Wellslok mounting
Wellsloks clamp the flange to the countertop from below. A Wellslok extension kit (22593) is available for wood counters up to 1" thick.
Adapter tops available
Optional adapter tops turn the 12 x 20 well into round inset holders, such as two 7-quart (20176) or three 4-quart (21615) insets.
Delivery and setup
- Inspect the carton for damage before you sign, and note any damage on the delivery receipt.
- An electrician should hard-wire the 208/240V single-phase supply to local code. This model has power supply leads and needs the metal shield shown on the Wells drawing.
- Keep the unit accessible from below for service, and keep the minimum clearances: 2" back, 2" sides, 6-3/4" below, 4-1/8" front.
- Run the 1/2" NPT drain to an approved drain per local plumbing code. A drain valve extension kit (20385) brings the drain handle to the counter front.
Questions buyers ask
What pans fit the SS206D?
It holds one 12" x 20" full-size pan or equivalent fractional pans. Adapter tops for round insets are sold separately.
What power does it need?
208/240V, single phase, 900/1200 W, 4.3/5.0 A as printed by Wells. It is hard-wired; there is no cord and plug.
How much space does it take?
Overall it is 13-11/16" wide, 21-3/4" front to back and 8-11/16" high. Keep 2" at the back and sides, 6-3/4" below and 4-1/8" in front.
Can it run without water?
Yes. Wells designs it for wet or dry operation and recommends wet operation for best results. The 1/2" drain makes emptying easier.
What warranty does it have?
Wells lists a 1-year parts and 1-year labor warranty in its current warranty statement.
Specs
| Manufacturer | Wells |
|---|---|
| Model Number | SS206D |
| Type | Top-Mount Rectangular Drop-In Food Warmer, Single Well |
| Shipping Weight | 16 lb. |
| Crate Size | 2.9 cu. ft. |
| Width | 13-11/16 Inches |
| Depth | 21-3/4 Inches |
| Height | 8-11/16 Inches |
| Control Panel | 3-5/16" W x 4-7/16" H |
| Minimum Clearances | Back 2"Sides 2"Bottom 6-3/4"Front 4-1/8" |
| Capacity | One 12 x 20 Full-Size Pan |
| Well Opening | 12" x 20" |
| Voltage | 208/240 Volts |
| Wattage | 900/1200 Watts |
| Amps | 4.3/5.0 Amps |
| Phase | 1 |
| Plug Type | Hard-Wired, No Cord |
| Wiring | Power Supply LeadsMetal Shield |
| Control Type | Infinite SwitchIndicator LightHigh Limit |
| Construction | One-Piece Stainless Steel Top FlangeHeavy-Gauge Deep-Drawn Stainless Steel PanTubular Heating Element |
| Mounting | Top Mount, Wellslok Clamps |
| Pan Corners | Square |
| Drain | 1/2" NPT |
| Operation | Wet or Dry, Wet Recommended |
| Optional Accessories | Optional 72" Wiring8 oz. Soup LadleDrain ScreensDrain Valve Extension Kit 20385Wellslok Extension Kit 22593Adapter Tops 20176, 20434, 21621, 21615, 21624, 21617Insets with Lid 20773, 20774, 20587, 20908 |
| Certifications | UL Recognized Component, NSF |
| Warranty | 1 Year Parts and 1 Year Labor |
Certifications
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
What Our Customers Say

