Wells SS-8TDUIAF 7 Qt. Insulated Auto-Fill Round Drop-In Food Warmer, Thermostatic, Drain, 208/240V
A 7-quart insulated round warmer that refills its own water, so soups and sauces hold at a steady temperature without running dry.
The Wells SS8TDUIAF is a heavy-duty, top-mount round food warmer that takes a standard 7-quart round inset (sold separately). It has a one-piece stainless steel top flange and a heavy-gauge, deep-drawn stainless steel warming pan heated by a tubular element underneath. A solenoid-fed water line keeps the water at the correct level, which keeps the temperature consistent and prevents dry operation. Auto-fill models run wet only and need a water supply connection. It runs on 208/240V single phase, hard-wired, and has a 1/2" NPT drain.
Check the counter material first: insulated models can go into non-metal counters with the optional non-metal counter adapter kit.
A solenoid and inlet check valve keep the water at the correct level for steady temperature and to prevent dry operation.
One auto-fill unit may be manifolded with up to three more standard or insulated round warmers with drains. The manifold is supplied by the customer to plumbing code.
The thermostat is recessed in a one-piece front-mounted panel, with a temperature-ready light. A high limit prevents overheating.
Insulation around the sides and bottom saves energy, gives quicker preheat and faster recovery, and puts less heat under the counter.
A one-piece stainless steel top flange and heavy-gauge, deep-drawn stainless steel pan hold a standard 7-quart round inset.
Wellsloks clamp the flange to the countertop from below; you turn them with a screwdriver during installation.
One standard 7-quart round inset. Insets with lids are sold separately as an option.
Wells shows a 9-1/2" round top cutout plus a front panel cutout for the control box. Follow the Wells install sheet for the exact layout.
208/240V, single phase, 620/825 W. It is wired to the supply by an electrician; this model has no cord and plug.
Yes. Auto-fill models need a water supply to the 1/4" external NPT connection, and they run wet only. The drain is standard.
Yes, fully insulated models can go into non-metal counters with the optional non-metal counter adapter kit.
Wells lists a 1-year limited parts and 1-year limited labor warranty for this series.
Specs
| Manufacturer | Wells |
|---|---|
| Model Number | SS8TDUIAF |
| Type | Top-Mount Round Drop-In Food Warmer, Auto Fill |
| Shipping Weight | 10.3 lb. |
| Installed Weight | 9.3 lb. |
| Width | 10-1/16 Inches |
| Depth | 10-1/16 Inches |
| Height | 10-7/8 Inches |
| Top Flange | 10-1/16" Diameter |
| Countertop Cutout | 9-1/2" Diameter |
| Front Panel Cutout | 12-7/8" W x 5" H |
| Minimum Clearances | Back 1"Sides 1"Bottom 8"Front 4"Front 2" with Control Box Below |
| Capacity | 7 Quart |
| Pan Fit | One Standard 7-Quart Round Inset, Sold Separately |
| Voltage | 208/240 Volts |
| Wattage | 620/825 Watts at 208/240V |
| Phase | 1 |
| Plug Type | Hard-Wired, No Cord |
| Wiring | Conduit and Enclosed Control Box |
| Control Type | ThermostaticTemperature-Ready LightHigh Limit |
| Insulation | Fully Insulated Sides and Bottom |
| Construction | One-Piece Stainless Steel Top FlangeHeavy-Gauge Deep-Drawn Stainless Steel PanTubular Heating Element |
| Mounting | Top Mount, Wellslok Clamps |
| Drain | 1/2" NPT |
| Water Connection | 1/4" External NPT to SolenoidWet Operation Only |
| Optional Accessories | Inset with Lid8 oz. Soup LadleDrain Valve Extension KitNon-Metal Counter Adapter Kit72" Control Wiring |
| Certifications | cULus, UL, NSF |
| Warranty | 1 Year Parts and 1 Year Labor |
Certifications
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
