Berkel 350-STD 350 Tabletop Chamber Vacuum Packaging Machine, Single 19" Seal Bar, 21 m3/h Busch Pump, 115V
A tabletop vacuum packager with a 21 m3/h Busch pump for mid- to high-volume portioning, storage and retail packs.
The Berkel 350 is a tabletop chamber vacuum packaging machine with a stainless steel housing and a 20" W x 18" D x 6.8" H stainless steel chamber. A single 19" seal bar gives a high integrity double seal, and a 21 m3/h Busch pump with a vacuum dial gauge pulls the air out. Electronic touch pad controls store up to 30 programs. Gas flush adds an anaerobic gas mixture or a pillow-pack seal to protect delicate products.
Leave room beside the machine for packed and unpacked product. It weighs 171 lb., so use a sturdy open-frame table.
A high quality Busch vacuum pump with a vacuum dial gauge, driven by a 1-1/4 HP motor that is totally enclosed and thermally protected.
The bar seals with a high integrity double seal and electric cut-off.
Electronic touch pad controls with up to 30 storable programs. A vacuum sensor allows a variable vacuum setting.
Adds an anaerobic gas mixture to keep product color and extend shelf life, or a pillow-pack seal to protect the product. Gas tank and regulator are not supplied.
Clean the chamber, spacers and lid rubber daily. Check the pump oil level in the sight glass weekly and change oil when it changes color.
20" W x 18" D x 6.8" H, with single 19" seal bar. Spacers in the chamber center the product height on the seal bar.
115V, 60 Hz, single phase at 14.2 amps, with an attached 6 ft. 3-wire cord and plug for a grounded receptacle.
Vacuum cycle of 25 to 35 seconds, depending on the product and program.
Yes. Gas flush adds nitrogen or carbon dioxide after evacuation. You supply the gas tank and regulator, set to about 5 psi.
Clean the chamber, spacers and lid rubber daily. Check pump oil weekly in the sight glass and change it when the color changes. Check the seal bar Teflon and silicone rubber for wear.
Berkel covers parts, labor and travel for one year, excluding wear items such as knives, blades and sharpening stones. Repairs go through Hobart Service or a Designated Berkel Service Location.
Specs
| Manufacturer | Berkel |
|---|---|
| Model Number | 350-STD |
| Type | Tabletop Chamber Vacuum Packaging Machine |
| Net Weight | 171 lb. |
| Shipping Weight | 231 lb. |
| Width | 23 Inches |
| Depth | 24 Inches |
| Height | 20-1/2 Inches |
| Box Size | 32" W x 25" D x 30" H |
| Voltage | 115 Volts |
| Hertz | 60 Hz |
| Phase | 1 |
| Amps | 14.2 Amps |
| Cord | 6 ft. Flexible 3-Wire Cord and Plug for Grounded Receptacle |
| Motor | 1-1/4 HP, 1-Speed, Totally Enclosed, Permanently Lubricated Ball Bearings, Thermally Protected |
| Chamber Size | 20" W x 18" D x 6.8" H |
| Seal Bars | Single 19"High Integrity Double SealElectric Cut-Off |
| Pump | Busch, 21 m3/h, with Vacuum Dial Gauge |
| Cycle | Vacuum cycle of 25 to 35 seconds |
| Control Type | Electronic Touch PadUp to 30 Storable ProgramsVacuum Sensor, Variable Vacuum Setting |
| Gas Flush | Anaerobic Gas Mixture or Pillow-Pack SealGas Tank and Regulator Not Supplied |
| Housing and Chamber | Stainless Steel |
| Certifications | cETLus, ETL |
| Warranty | 1 Year Parts, Labor and Travel |
| Warranty Exclusions | Wear Items Excluded |
Certifications
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
