Vulcan 936RX-30 36" Heavy Duty Gas Griddle, 36" x 30" 1" Steel Plate, 3 Burners, Snap-Action Thermostats, 81,000 BTU
A 36" griddle with an extra-deep 30" plate and a thermostat every 12".
The Vulcan 936RX-30 is a 36" countertop gas griddle from the 900RX heavy duty series with a 36" x 30", 1" thick polished steel plate. 3 U-shaped burners at 27,000 BTU/hr each give 81,000 BTU/hr, with one snap-action thermostat per burner. Dual manual or electric ignition runs on a 120V cord, and one pilot safety covers every two burners.
Check the counter, stand or base: the unit needs 36" of width and 37-1/2" of depth, plus 6" from combustible walls.
A 36" x 30" polished steel plate, 1" thick, with 12 gauge 4" stainless back and tapered side splashes.
One embedded snap-action thermostat per burner holds each 12" zone between 200°F and 550°F.
3 U-shaped aluminized steel burners, one per 12", for 81,000 BTU/hr in total.
A spatula wide 3-1/2" gutter and fully welded chute feed a 6 quart grease drawer and stop grease migration.
The stainless front top ledge stays cooler for cooks leaning in, on a fully welded chassis.
Light the pilots by hand or with the 120V electric ignition; one pilot safety per two burners shuts off gas if a pilot goes out.
Vulcan builds it for the gas type you specify when ordering, natural gas or propane. Tell us which gas you have before you order.
1" thick polished steel, 36" wide and 30" deep, with chrome and other plates offered as factory options.
Yes, for the electric ignition: 120V, 1 A, single phase, with an 8 ft. cord and NEMA 5-15 plug. The pilots can also be lit by hand.
6" at the sides and rear from combustible construction, 0" from non-combustible construction, and 4" at the bottom on minimum 4" legs.
Vulcan says its griddles are designed for refrigerated or freezer bases or equipment stands; the STAND/C-36 stand and ISTAND/C-36 integrated stand are sold separately.
Vulcan lists a one year limited parts and labor warranty on the spec sheet.
Specs
| Manufacturer | Vulcan |
|---|---|
| Model Number | 936RX-30 |
| Series | 900RX Series Heavy Duty Gas Griddle |
| Width | 36 Inches |
| Depth | 37-1/2 Inches |
| Height | 15-1/4 Inches |
| Working Height | 11-1/8 Inches |
| Cooking Surface | 36" W x 30" D |
| Griddle Plate | 1" Thick Polished Steel, 30" Deep |
| Splashes | 4" Stainless Steel Back and Tapered Side Splashes, 12 Gauge |
| Temperature Range | 200 - 550 Degrees F |
| Control Type | Embedded Mechanical Snap-Action Thermostat per Burner |
| Fuel Type | Natural Gas or Propane, Specify When Ordering |
| Total BTU | 81,000 BTU/hr |
| Burners | 3 U-Shaped Aluminized Steel Burners, 27,000 BTU/hr Each, One per 12" |
| Gas Connection | 3/4" RearManual Shut-Off Valve |
| Gas Pressure | Regulator SuppliedNatural Gas 4.0" W.C.Propane 10.0" W.C. |
| Ignition | Dual Manual or Electric Ignition1 Pilot Safety Valve per 2 Burners |
| Voltage | 120 Volts |
| Amps | 1 Amp |
| Phase | 1 |
| Plug Type | NEMA 5-15P |
| Cord Length | 8 ft. |
| Exterior | Stainless Steel Front, Sides and Front Top Ledge with Cool Bullnose |
| Chassis | Fully Welded Stainless and Aluminized SteelBottom Heat Shields |
| Grease Collection | 3-1/2" Wide Welded Grease Gutter and Chute1 Stainless Steel 6 Quart Grease Drawer |
| Legs | 4" Adjustable |
| Clearances | Combustible: Sides and Rear 6"Non-Combustible: 0"Bottom 4", Minimum 4" Legs |
| Vulcan Options | Chrome PlateRear Grease TroughUnder-Device Plumbing10" Back SplashFactory Installed Frame for Clamshell |
| Vulcan Accessories | PLTRAIL-36 Plate RailCONRAIL-36 Condiment RailCUTBD-36 Cutting BoardSTAND/C-36 StandISTAND/C-36 Integrated StandLEGS-GRD6 6" Legs3/4QD-HOSE-4 Gas HoseBANKING-STRIP |
| Certifications | CSA, NSF |
| Warranty | 1 Year Limited Parts and Labor |
Certifications
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
